

BioCache
1MB Cache adapter PCB for Biostar MB-8433-UUD
- Size
- 58.8 × 80.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 108
- Pads
- 421
- Tracks, vias
- 1,663, 102
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 May 2025
- Updated
- 9 May 2025
Overview
BioCache is an open-source printed circuit board by karcherm, from the karcherm/mb8433-uud-cache-pcb repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 58.8 × 80.6 mm with 44 parts on 108 nets, routed with 1,663 tracks and 102 vias.
Its parts include 24 connectors, 9 capacitors, 9 ICs and 1 resistor.
README
README.md1MB cache module for the Biostar MB-8433-UUD mainboard
This adapter PCB enables you to install cache using SOJ32 chips, which are still in production. Furthermore, with a modification of the mainboard, you can install up to 1MB of cache. To support 1MB of cache, you need to grab A19 from the CPU and route it to the square header pin at the corner of this PCB.
Assembly hints
For U1 to U8 (data RAM): Use 128k x 8 SRAM chips - the layout is not meant for 32k x 8 chips: Neither does the address line ordering omit the "correct" lines if you install 32k x 8 chips, nor is there sufficient bypassing at the Vcc pin for SOJ28 chips.
U9 can be a 128k x 8 or 64k x 8 SRAM chip. In case you just need 512K of cache, you can downgrade U9 to 32k x 8. Sufficient bypassing for a 32k x 8 chip is present at this location. You can not downgrade the data RAM to 64k x 8, though, as the address routing in version 1.1 is not adapted to this scenario.
Make sure to use sufficiently thin pins for plugging into the cache sockets.
Pay attention to the orientation of the memory chips: Pin 1 is always to the edge of the PCB, i.e. U1-U4 are oriented the other way as U5-U9.
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C9 |
| 9 | 61C1024 | Package_SO:SOJ-32_7.62x20.955mm_P1.27mm | U1, U2, U3, U4, U5, U6, U7, U8, U9 |
| 8 | Conn_01x01_Male | ConnectorNoSquare1:PinHeader_1x01_P2.54mm_Vertical_NoSquare1 | J1.3, J2.3, J3.3, J4.1, J10.1, J10.2, J11.1, J13.1 |
| 4 | Conn_01x02_Male | ConnectorNoSquare1:PinHeader_1x02_P2.54mm_Vertical_NoSquare1 | J8.3, J10.3, J11.2, J12.2 |
| 4 | Conn_01x04_Male | ConnectorNoSquare1:PinHeader_1x04_P2.54mm_Vertical_NoSquare1 | J1.1, J2.1, J4.2, J8.1 |
| 4 | Conn_01x05_Male | ConnectorNoSquare1:PinHeader_1x05_P2.54mm_Vertical_NoSquare1 | J1.2, J2.2, J3.2, J8.2 |
| 2 | Conn_01x14_Male | ConnectorNoSquare1:PinHeader_1x14_P2.54mm_Vertical_NoSquare1 | J12.1, J13.2 |
| 2 | Conn_01x16_Male | ConnectorNoSquare1:PinHeader_1x16_P2.54mm_Vertical_NoSquare1 | J3.1, J4.3 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | Conn_01x01_Male | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Horizontal | JA19 |
Similar boards
- 2 layers78 × 60 mm

- 2 layers115 × 14.5 mm

- 2 layers37.7 × 20 mm

- 2 layers88.9 × 88.4 mm

- 2 layers125 × 98 mm

3-in-1
mudmin/AnotherMaker
This is where I will store code snippets for AnotherMaker Videos
44 parts258 - 2 layers65 × 56.5 mm

RPiG3iMac
qbancoffee/imac_g3_ivad_board_init
iMac G3 IVAD board initialization with an arduino
44 parts240LGPL-3.0 - 2 layers54.4 × 49.3 mm

Fx3 tn20k adapter
Stefan-Olt/MISRC
MISRC Is a multi channel RF capture device for FM RF, S-Video, CVBS RAW capture and anything else, but intended and supported for the decode family of projects vhs-decode, ld-decode, hifi-decode.
44 parts236CC-BY-4.0 - 2 layers250 × 32 mm

Questions
How big is the BioCache PCB?
It measures 58.8 × 80.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BioCache use?
44 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BioCache KiCad files?
From the karcherm/mb8433-uud-cache-pcb repository on GitHub, at the commit this page was made from: the board is Hardware/BioCache.kicad_pcb and its schematic Hardware/BioCache-data.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BioCache design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).