Skip to the content
2 layers58.8 × 80.6 mmBioCache, the printed circuit board in 3D

1MB Cache adapter PCB for Biostar MB-8433-UUD

Size
58.8 × 80.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
44
Nets
108
Pads
421
Tracks, vias
1,663, 102
Pours
4
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
4 May 2025
Updated
9 May 2025

Overview

BioCache is an open-source printed circuit board by karcherm, from the karcherm/mb8433-uud-cache-pcb repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 58.8 × 80.6 mm with 44 parts on 108 nets, routed with 1,663 tracks and 102 vias.

Its parts include 24 connectors, 9 capacitors, 9 ICs and 1 resistor.

README

README.md

1MB cache module for the Biostar MB-8433-UUD mainboard

This adapter PCB enables you to install cache using SOJ32 chips, which are still in production. Furthermore, with a modification of the mainboard, you can install up to 1MB of cache. To support 1MB of cache, you need to grab A19 from the CPU and route it to the square header pin at the corner of this PCB.

Assembly hints

For U1 to U8 (data RAM): Use 128k x 8 SRAM chips - the layout is not meant for 32k x 8 chips: Neither does the address line ordering omit the "correct" lines if you install 32k x 8 chips, nor is there sufficient bypassing at the Vcc pin for SOJ28 chips.

U9 can be a 128k x 8 or 64k x 8 SRAM chip. In case you just need 512K of cache, you can downgrade U9 to 32k x 8. Sufficient bypassing for a 32k x 8 chip is present at this location. You can not downgrade the data RAM to 64k x 8, though, as the address routing in version 1.1 is not adapted to this scenario.

Make sure to use sufficiently thin pins for plugging into the cache sockets.

Pay attention to the orientation of the memory chips: Pin 1 is always to the edge of the PCB, i.e. U1-U4 are oriented the other way as U5-U9.

Parts

44
QtyValueFootprintReferences
9100nCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2, C3, C4, C5, C6, C7, C8, C9
961C1024Package_SO:SOJ-32_7.62x20.955mm_P1.27mmU1, U2, U3, U4, U5, U6, U7, U8, U9
8Conn_01x01_MaleConnectorNoSquare1:PinHeader_1x01_P2.54mm_Vertical_NoSquare1J1.3, J2.3, J3.3, J4.1, J10.1, J10.2, J11.1, J13.1
4Conn_01x02_MaleConnectorNoSquare1:PinHeader_1x02_P2.54mm_Vertical_NoSquare1J8.3, J10.3, J11.2, J12.2
4Conn_01x04_MaleConnectorNoSquare1:PinHeader_1x04_P2.54mm_Vertical_NoSquare1J1.1, J2.1, J4.2, J8.1
4Conn_01x05_MaleConnectorNoSquare1:PinHeader_1x05_P2.54mm_Vertical_NoSquare1J1.2, J2.2, J3.2, J8.2
2Conn_01x14_MaleConnectorNoSquare1:PinHeader_1x14_P2.54mm_Vertical_NoSquare1J12.1, J13.2
2Conn_01x16_MaleConnectorNoSquare1:PinHeader_1x16_P2.54mm_Vertical_NoSquare1J3.1, J4.3
110kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
1Conn_01x01_MaleConnector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_HorizontalJA19

Similar boards

  • 2 layers78 × 60 mmIce viz, the printed circuit board in 3D

    Ice viz

    muni-works/vcad

    BRep CAD kernel in Rust/WASM

    44 parts442Apache-2.0
  • 2 layers115 × 14.5 mmUFC Function Select, the printed circuit board in 3D

    UFC Function Select

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    44 parts431
  • 2 layers37.7 × 20 mmCandleLight, the printed circuit board in 3D

    CandleLight

    HubertD/candleLight

    stm32f0 usb can adapter (KiCAD)

    44 parts400
  • 2 layers88.9 × 88.4 mmTeensypi v91, the printed circuit board in 3D

    Teensypi v91

    simondlevy/Hackflight

    Minimalist flight-control toolkit for makers

    44 parts334GPL-3.0
  • 2 layers125 × 98 mm3-in-1, the printed circuit board in 3D

    3-in-1

    mudmin/AnotherMaker

    This is where I will store code snippets for AnotherMaker Videos

    44 parts258
  • 2 layers65 × 56.5 mmRPiG3iMac, the printed circuit board in 3D

    RPiG3iMac

    qbancoffee/imac_g3_ivad_board_init

    iMac G3 IVAD board initialization with an arduino

    44 parts240LGPL-3.0
  • 2 layers54.4 × 49.3 mmFx3 tn20k adapter, the printed circuit board in 3D

    Fx3 tn20k adapter

    Stefan-Olt/MISRC

    MISRC Is a multi channel RF capture device for FM RF, S-Video, CVBS RAW capture and anything else, but intended and supported for the decode family of projects vhs-decode, ld-decode, hifi-decode.

    44 parts236CC-BY-4.0
  • 2 layers250 × 32 mmPsu, the printed circuit board in 3D

    Psu

    shmoergh/moduleur

    Fully analog DIY-friendly modular synth

    44 parts222

Questions

How big is the BioCache PCB?

It measures 58.8 × 80.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the BioCache use?

44 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BioCache KiCad files?

From the karcherm/mb8433-uud-cache-pcb repository on GitHub, at the commit this page was made from: the board is Hardware/BioCache.kicad_pcb and its schematic Hardware/BioCache-data.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the BioCache design in my own project?

Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).