4 layers65 × 30 mm
Soleil
protolux-electronics/soleil_hardware
Hardware design files for Soleil, an open source power management and sleep control board for Raspberry Pi
81 parts22CERN-OHL-P-2.0
2 layers
Clintelli board
karadalex/clintelli1Clintelli - IoT Vest, Cloud
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 135
- Pads
- 238
- Tracks, vias
- 248, 12
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Dec 2019
- Updated
- 17 Dec 2019
Overview
Clintelli board is an open-source printed circuit board by karadalex, from the karadalex/clintelli repository on GitHub. It is a 2-layer board with 26 parts on 135 nets, routed with 248 tracks and 12 vias.
It is built around the ESP32-WROOM-32 and ATECC608A-MAHDA-S. Its parts include 8 capacitors, 7 connectors, 5 ICs, 2 resistors and 1 diode. It belongs with the home automation and IoT boards and the ESP32 and STM32 boards of this library.
Main components
2
ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
ATECC608A-MAHDA-S
UDFN-8(2x3)-40℃~+85℃ 150nA 2V~5.5V ECC、SHA-256、AES-128 I2C UDFN-8(2x3) Security Verification / Encryption ICs ROHSMicrochip TechnologySecurity Verification / Encryption ICs
README
README.mdClintelli
Clintelli stands for Clinical Intelligence and is a platform that leverages Artificial Intelligence, wearable IoT technologies and scalable fault-tolerant Cloud technologies to monitor clinical data and improve patient care.
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | CONN_01X01 | MountingHole:MountingHole_2.2mm_M2_Pad | P1, P2, P3, P4 |
| 3 | 1uF | Capacitor_SMD:C_0805_2012Metric | C6, C7, C8 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | C3, C9 |
| 2 | 10pF | Capacitor_SMD:C_0805_2012Metric | C4, C5 |
| 2 | AudioJack3_Ground | Connector_Audio:Jack_3.5mm_CUI_SJ-3523-SMT_Horizontal | J2, J3 |
| 1 | 1.5nF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 1K | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 22uH | Inductor_SMD:L_6.3x6.3_H3 | L1 |
| 1 | 32MHz | Crystal:Crystal_C38-LF_D3.0mm_L8.0mm_Horizontal_1EP_style2 | Y1 |
| 1 | ADS1298xPAG | Package_QFP:TQFP-64_10x10mm_P0.5mm | U3 |
| 1 | ATECC608A-MAHDA | Package_DFN_QFN:DFN-8-1EP_3x2mm_P0.5mm_EP1.3x1.5mm | U4 |
| 1 | AudioJack4_Ground | Connector_Audio:Jack_3.5mm_PJ320D_Horizontal | J1 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U2 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Castellated | D1 |
| 1 | STM32F302RETx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U5 |
| 1 | SW_PUSH | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KMR2 | SW1 |
| 1 | VDD | Package_TO_SOT_SMD:SOT-23-5 | U1 |
Questions
What parts does the Clintelli board use?
26 parts, built around the ESP32-WROOM-32 and ATECC608A-MAHDA-S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Clintelli board KiCad files?
From the karadalex/clintelli repository on GitHub, at the commit this page was made from: the board is cad/clintelli-board/clintelli-board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Clintelli board design in my own project?
Its repository states no licence, so its author keeps all rights: ask karadalex before reusing the design.
Similar boards
- 4 layers81.2 × 100.2 mm
- 2 layers68 × 58 mm
Iot data logger nfc samd21
polesskiy-dev/iot-risk-data-logger-nfc-samd21-hardware
Hardware (schematics, PCB, BOM) for iot-risk-data-logger-nfc-samd21 project
66 parts5MIT - 2 layers85.4 × 53.7 mm
- 6 layers68 × 26 mm
- 2 layers
- 2 layers50 × 80 mm
- 2 layers10.8 × 9 mm
Nerves key devboard
ConnorRigby/nerves-key-devboard
WIP hardware project for a basic nerves key development board
5 parts