4 layers75 × 56.4 mm
Esp32-c6-wroom1 board
pushtiujeniya/esp32-c6-environmental-logger
This repository contains an Environmental Sensor Station and Data Logger powered by the ESP32-C6-WROOM-1 microcontroller.
59 parts4
2 layers26 × 30 mm
Expansion Card
KaptenIT/Framework-ESP32-ModuleFramework module with a esp32 chip inside
- Size
- 26 × 30 mm
- Copper layers
- 2
- Thickness
- 0.8 mm
- Parts
- 13
- Nets
- 53
- Pads
- 96
- Tracks, vias
- 0, 8
- Routed
- Not yet
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 3 Dec 2024
- Updated
- 3 Dec 2024
Overview
Expansion Card is an open-source printed circuit board by KaptenIT, from the KaptenIT/Framework-ESP32-Module repository on GitHub. It is a 2-layer board of 26 × 30 mm with 13 parts on 53 nets.
It is built around the ESP32-C6-WROOM-1-N8 and AP2112K-3.3. Its parts include 2 capacitors, 2 ICs, 2 connectors and 1 resistor. It belongs with the ESP32 and RISC-V boards of this library.
Main components
2
ESP32-C6-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -99.2dBm 2.4GHz 20.5dBm 382mA 3V~3.6V 78mA ESP32-C6 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
README
README.mdBased on the template in FrameworkComputer/ExpansionCards
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1, TP2, TP3, TP4 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2 |
| 1 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | ESP32-C6-WROOM-1 | Library:ESP32-C6-WROOM-1 | U2 |
| 1 | TSM-108-02-L-DH-TR | Connector_PinHeader_2.54mm:PinHeader_2x09_P2.54mm_Vertical_SMD | J1 |
| 1 | USB_C_Plug_USB2.0 | Expansion_Card:USB_C_Plug_Molex_105444 | P1 |
Questions
How big is the Expansion Card PCB?
It measures 26 × 30 mm and has 2 copper layers, 0.8 mm thick.
What parts does the Expansion Card use?
13 parts, built around the ESP32-C6-WROOM-1-N8 and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Expansion Card KiCad files?
From the KaptenIT/Framework-ESP32-Module repository on GitHub, at the commit this page was made from: the board is Expansion_Card.kicad_pcb and its schematic Expansion_Card.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Expansion Card design in my own project?
Its repository states no licence, so its author keeps all rights: ask KaptenIT before reusing the design.
Similar boards
- 2 layers80 × 50 mm
Ledhub c6
AskAlice/home-automation-pcbs
Daily Kimi-generated home automation PCB designs with KiCad sources, 3D models, and rendered documentation
59 parts1MIT - 4 layers45 × 30 mm
- 4 layers66 × 57.8 mm
FirstESPproject
astinchang/ESP32-Wireless-Air-Filter-and-Monitor
This project is an automatic air filtration system built around an ESP32 microcontroller. The goal of the project is to improve indoor air quality while saving energy by only increasing fan speed when the air quality…
35 partsCC0-1.0 - 4 layers87.1 × 67.4 mm
RFclockgen
Jjbinstock/RF-Clock-Generator
A dual channel, tunable RF clock generator PCB project
75 parts - 2 layers116.6 × 74.5 mm
Smart switch 3x
pavan-firmware/EH-Master-Repo
This directory contains the KiCad Schematic and PCB Design Project for the EH Smart Switch (3X / 4X Channel with BL0942 Metering).
52 parts - 4 layers150 × 100 mm
Zpn devboard
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
168 parts253GPL-3.0 - 2 layers69.4 × 113 mm
