
Zx50 Bus Probe RevB
mmosko/Zx50
This is the primary CPU board for the Zx50 8-slot passive backplane system. It hosts the Z80 microprocessor (running at 5 MHz to 10 MHz) and acts as the master controller for the primary bus.

The computer with only COSMAC CDP1802 and PIC18F47Q43/PIC18F27Q43
Emu1802 mini is an open-source printed circuit board by kanpapa, from the kanpapa/emu1802 repository on GitHub. It is a 2-layer board of 47 × 72 mm with 28 parts on 56 nets, routed with 344 tracks and 0 vias.
It is built around the PIC18F27Q43-I/SO. Its parts include 6 connectors, 4 capacitors, 3 resistors, 3 diodes and 2 ICs. It belongs with the PIC boards of this library.
The computer with only COSMAC CDP1802 and PIC18F47Q43/PIC18F27Q43
developed by Kazuhiro Ouchi
The purpose of this experiment is to see if it is possible to make a real COSMAC work with fewer components, at a lower cost, and more compactly.
The EMU1802 is replacement the CPU of the EMUZ80 with a COSMAC.
The EMU1802-mini is replacement the PIC of the EMU1802 with a PIC18F27Q43.
You can also refer to my blog. (in Japanese)
https://kanpapa.com/cosmac/blog/emu1802/
The EMU1802-mini

Testing of the EMU1802-mini

The idiot monitor is working on the EMU1802-mini

Prototype of The EMU1802

References to any products, programs or services do not imply that they will be available in all countries in which their respective owner operates.
Company, product, or services names may be trademarks or services marks of others.
All libraries used in this code are copyright their respective authors.
This project is based on the EMUZ80 hardware and software developed by Tetsuya Suzuki.
EMUZ80 - The computer with only Z80 and PIC18F47Q43
Written by Tetsuya Suzuki
https://github.com/vintagechips/emuz80
The firmware includes the IDIOT monitor.
IDIOT/4 MONITOR FOR THE 1802
WRITTEN: 6/23/82 BY LEE HART
COPYRIGHT 1982-85 BY TMSI
This program may be used for any noncommercial use free of charge.
fixes by Herb Johnson HRJ April 2010, Jan 2014
https://www.retrotechnology.com/memship/mship_idiot.html
Thanks to Gazelle for optimizing the firmware.
Modified by Gazelle
https://drive.google.com/drive/folders/14-OX5THzVz1BVxLPXheExVnpIBqS79NJ
1st release 2022-7-29
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | MH1, MH2, MH3, MH4 |
| 3 | 0.1u | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2, C3 |
| 2 | 10K | Resistor_THT:R_Array_SIP5 | RN1, RN2 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2 |
| 2 | 1N4148 | Diode_THT:D_T-1_P5.08mm_Horizontal | D1, D2 |
| 1 | 1.5k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C4 |
| 1 | BUS POWER1 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | BUS POWER2 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | CDP1802ACE | Package_DIP:DIP-40_W15.24mm_Socket | U1 |
| 1 | CPUA | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J1 |
| 1 | CPUB | Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_Vertical | J2 |
| 1 | DC-IN | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | CON4 |
| 1 | PIC18F27Q43 | Package_DIP:DIP-28_W7.62mm_Socket | U2 |
| 1 | PICKIT/SNAP | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | CON1 |
| 1 | POWER | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SW1 |
| 1 | POWER LED | LED_THT:LED_D3.0mm | LED1 |
| 1 | RESET | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | Software Serial | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | CON3 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | CON2 |

mmosko/Zx50
This is the primary CPU board for the Zx50 8-slot passive backplane system. It hosts the Z80 microprocessor (running at 5 MHz to 10 MHz) and acts as the master controller for the primary bus.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch

TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

asterics/esp32_mouse_keyboard
ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)


Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
It measures 47 × 72 mm and has 2 copper layers, 1.6 mm thick.
28 parts, built around the PIC18F27Q43-I/SO. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kanpapa/emu1802 repository on GitHub, at the commit this page was made from: the board is kicad/emu1802_mini/emu1802_mini.kicad_pcb and its schematic kicad/emu1802/emu1802.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask kanpapa before reusing the design.