Skip to the content
2 layers91.4 × 96.1 mmResolution week 2, the printed circuit board in 3D

Resolution week 2

kanokid/TurtleBlinkyChaos

This is a PCB design in the shape of a turtle that uses three astable multivibrators and SPDT switches to create a chaos blinky with two LEDs for the eyes that blink on and off, on and off, in kind of a random order depending on how you flip the switches.

Size
91.4 × 96.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
41
Nets
26
Pads
92
Tracks, vias
181, 3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
25 Mar 2026
Updated
28 Mar 2026

Overview

Resolution week 2 is an open-source printed circuit board by kanokid, from the kanokid/TurtleBlinkyChaos repository on GitHub. It is a 2-layer board of 91.4 × 96.1 mm with 41 parts on 26 nets, routed with 181 tracks and 3 vias.

Its parts include 12 capacitors, 12 resistors, 6 diodes, 6 transistors and 4 switches.

README

README.md

TurtleBlinkyChaos

This is a PCB design in the shape of a turtle that uses three astable multivibrators and SPDT switches to create a chaos blinky with two LEDs for the eyes that blink on and off, on and off, in kind of a random order depending on how you flip the switches.

Screenshot 2026-03-24 212638

resolution hardware week 2 simulation

Screenshot 2026-03-24 212400 Screenshot 2026-03-24 212344

Parts

41
QtyValueFootprintReferences
6110Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR1, R4, R5, R8, R9, R12
6220nFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC1, C2, C3, C4, C5, C6
64.7kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_HorizontalR2, R3, R6, R7, R10, R11
647nFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC7, C8, C9, C10, C11, C12
6Q_NPN_BCEPackage_TO_SOT_THT:TO-92L_Inline_WideQ1, Q2, Q3, Q4, Q5, Q6
4DDiode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D3, D5, D6
4SW_SPDTButton_Switch_THT:SS12D10G5SW1, SW2, SW3, SW4
2LEDLED_THT:LED_D5.0mmD4, D7
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2

Similar boards

  • 2 layers70 × 35 mmTLF35584 breakout, the printed circuit board in 3D

    TLF35584 breakout

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    41 parts1.2k
  • 2 layers270 × 11 mmDaylight Disco, the printed circuit board in 3D

    Daylight Disco

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    41 parts1.1kGPL-3.0
  • 2 layers27.5 × 48.3 mmICE40DevBoard, the printed circuit board in 3D

    ICE40DevBoard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    41 parts915
  • 2 layers45 × 25 mmEasy PD Sink, the printed circuit board in 3D

    Easy PD Sink

    openwch/ch32v003

    CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10

    41 parts599
  • 2 layers97 × 78.5 mmDumbpad, the printed circuit board in 3D

    Dumbpad

    imchipwood/dumbpad

    Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro

    41 parts517GPL-2.0
  • 2 layers37 × 15 mmCanTactDist, the printed circuit board in 3D

    CanTactDist

    bondus/KlipperToolboard

    A 3D printer tool head controller board

    41 parts373GPL-3.0
  • 2 layers20.3 × 69.7 mmPG attiny404, the printed circuit board in 3D

    PG attiny404

    fabiansteiner/OpenValve

    3D-printable pinch valve for irrigation and sensor-driven liquid control.

    41 parts276CERN-OHL-S-2.0

Questions

How big is the Resolution week 2 PCB?

It measures 91.4 × 96.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Resolution week 2 use?

41 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Resolution week 2 KiCad files?

From the kanokid/TurtleBlinkyChaos repository on GitHub, at the commit this page was made from: the board is src/resolution week 2.kicad_pcb and its schematic src/resolution week 2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Resolution week 2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask kanokid before reusing the design.