
Project 2
KanojiyaVishalKumar/ECE-PCB-Design-Projects
A collection of PCB design projects created using KiCad, including power electronics, analog circuits, embedded systems, and communication-related designs.

A collection of PCB design projects created using KiCad, including power electronics, analog circuits, embedded systems, and communication-related designs. This repository showcases schematic design, PCB layout, component selection, routing, and 3D visualization developed as part of my ECE journey.
Project1 is an open-source printed circuit board by KanojiyaVishalKumar, from the KanojiyaVishalKumar/ECE-PCB-Design-Projects repository on GitHub. It is a 2-layer board of 43 × 21 mm with 15 parts on 7 nets, routed with 24 tracks and 12 vias.
It is built around the LM2596S-5.0 and SS34. Its parts include 4 capacitors, 4 connectors, 2 resistors, 2 diodes and 1 IC.
Welcome to my PCB Design Projects repository.
This repository contains a collection of electronic circuit and PCB designs created using KiCad as part of my learning journey in Electronics and Communication Engineering (ECE).
The goal of these projects is to strengthen my understanding of:
Most of the projects currently focus on PCB design and 3D visualization. Future updates will include PCB fabrication, hardware testing, performance analysis, and design optimization.
| Status | Project |
|---|---|
| ✅ | LM2596 Adjustable Buck Converter |
| 🔨 | NE555 PWM LED Dimmer (Current Project) |
| 🔊 | LM386 Audio Amplifier |
| ⚡ | LM317 Adjustable Power Supply |
| 🔌 | USB-to-UART Board |
| 🌡️ | Temperature Sensor Board |
| 🖥️ | MCU + OLED Board |
| 📡 | ESP32 Sensor/Control Board |
| 🏆 | Custom ESP32 Development Board |
Each project contains:
I regularly share my electronics projects and learning progress through GitHub and LinkedIn.
Feedback, suggestions, and collaboration are always welcome.
Designed by: Kanojiya Vishal Kumar
Branch: Electronics and Communication Engineering (ECE)
Software Used: KiCad 10.0
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x01_Pin | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J1, J2, J3, J4 |
| 2 | 100nf | Capacitor_SMD:C_0603_1608Metric | C2, C4 |
| 1 | 100Uf | Capacitor_SMD:CP_Elec_8x10 | C1 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 220nf | Capacitor_SMD:CP_Elec_8x10 | C3 |
| 1 | 47uh | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 4K7 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | LM2596S-5 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U1 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Bourns_3296Y_Vertical | RV1 |
| 1 | SS34 | Diode_SMD:D_SMA | D2 |

KanojiyaVishalKumar/ECE-PCB-Design-Projects
A collection of PCB design projects created using KiCad, including power electronics, analog circuits, embedded systems, and communication-related designs.

willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels


AidanHockey5/YM2151_VGM_STM32
A hardware arcade video game music player based on the STM32 platform driving a YM2151





ConquerToFreedom/SwasthEdge
Low-cost self-diagnosing edge controller for industrial sensor reliability
It measures 43 × 21 mm and has 2 copper layers, 1.6 mm thick.
15 parts, built around the LM2596S-5.0 and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the KanojiyaVishalKumar/ECE-PCB-Design-Projects repository on GitHub, at the commit this page was made from: the board is LM2596-Buck_convertor/PCB/project1.kicad_pcb and its schematic 555ic_Dimmer/Schematic/project_2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask KanojiyaVishalKumar before reusing the design.