
Project1
KanojiyaVishalKumar/ECE-PCB-Design-Projects
A collection of PCB design projects created using KiCad, including power electronics, analog circuits, embedded systems, and communication-related designs.

A collection of PCB design projects created using KiCad, including power electronics, analog circuits, embedded systems, and communication-related designs. This repository showcases schematic design, PCB layout, component selection, routing, and 3D visualization developed as part of my ECE journey.
Project 2 is an open-source printed circuit board by KanojiyaVishalKumar, from the KanojiyaVishalKumar/ECE-PCB-Design-Projects repository on GitHub. It is a 2-layer board of 32 × 25 mm with 13 parts on 10 nets, routed with 57 tracks and 4 vias.
It is built around the IRLZ44N. Its parts include 4 connectors, 3 diodes, 2 capacitors, 1 resistor and 1 IC.
Welcome to my PCB Design Projects repository.
This repository contains a collection of electronic circuit and PCB designs created using KiCad as part of my learning journey in Electronics and Communication Engineering (ECE).
The goal of these projects is to strengthen my understanding of:
Most of the projects currently focus on PCB design and 3D visualization. Future updates will include PCB fabrication, hardware testing, performance analysis, and design optimization.
| Status | Project |
|---|---|
| ✅ | LM2596 Adjustable Buck Converter |
| 🔨 | NE555 PWM LED Dimmer (Current Project) |
| 🔊 | LM386 Audio Amplifier |
| ⚡ | LM317 Adjustable Power Supply |
| 🔌 | USB-to-UART Board |
| 🌡️ | Temperature Sensor Board |
| 🖥️ | MCU + OLED Board |
| 📡 | ESP32 Sensor/Control Board |
| 🏆 | Custom ESP32 Development Board |
Each project contains:
I regularly share my electronics projects and learning progress through GitHub and LinkedIn.
Feedback, suggestions, and collaboration are always welcome.
Designed by: Kanojiya Vishal Kumar
Branch: Electronics and Communication Engineering (ECE)
Software Used: KiCad 10.0
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x01_Pin | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J1, J2, J4, VCC in |
| 2 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2 |
| 1 | 100n | Capacitor_SMD:CP_Elec_5x3.9 | C1 |
| 1 | 10K-50K | Potentiometer_THT:Potentiometer_Bourns_3296Y_Vertical | RV1 |
| 1 | 10n | Capacitor_SMD:CP_Elec_5x3.9 | C2 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 5mm | LED_SMD:LED_1812_4532Metric | D3 |
| 1 | ICM7555xB | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |

KanojiyaVishalKumar/ECE-PCB-Design-Projects
A collection of PCB design projects created using KiCad, including power electronics, analog circuits, embedded systems, and communication-related designs.



pscrespo/Morpheus-STM32
A small 3D printer controller board for use with a "blue pill" STM32F1 generic board. Inspired on http://reprap.org/wiki/SinapTec


MitchBradley/Esp32PrinterController
PCB design for 3D printer controller using ESP32 processor


robinolejnik/dmx-ledstrip-dimmer-32ch
Arduino Mini and TLC5940 based 32 channel 12V PWM dimmer with DMX512 and RDM support.

Moragor/BatteryAnalyzer_MkII
Updated Version of the battery analyzer, now with constant current
It measures 32 × 25 mm and has 2 copper layers, 1.6 mm thick.
13 parts, built around the IRLZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the KanojiyaVishalKumar/ECE-PCB-Design-Projects repository on GitHub, at the commit this page was made from: the board is 555ic_Dimmer/PCB/project_2.kicad_pcb and its schematic 555ic_Dimmer/Schematic/project_2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask KanojiyaVishalKumar before reusing the design.