2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
33 parts1kGPL-3.0
2 layers95.6 × 100 mm
TypeBP top sideD
kanengomibako/misc3- Size
- 95.6 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 6
- Pads
- 43
- Tracks, vias
- 41, 1
- Pours
- 10
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 25 May 2024
- Updated
- 24 Oct 2025
Overview
TypeBP top sideD is an open-source printed circuit board by kanengomibako, from the kanengomibako/misc repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 95.6 × 100 mm with 33 parts on 6 nets, routed with 41 tracks and 1 via.
Its parts include 12 connectors and 1 switch.
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | h | myFoot:kado_maru | r, r, r, r, r, r, r, r, r, r, r, r, r, r, r, r |
| 5 | GND | myFoot:my_SmallPad_0-8mmDrill | J6, J7, J8, J9, J10 |
| 2 | NC | myFoot:my_SmallPad_0-8mmDrill | J8, J8 |
| 2 | p | myFoot:my_pad_6-2mm | *, * |
| 1 | IN | myFoot:my_SmallPad_0-8mmDrill | J1 |
| 1 | LED- | myFoot:my_SmallPad_0-8mmDrill | J5 |
| 1 | OUT | myFoot:my_SmallPad_0-8mmDrill | J4 |
| 1 | RTN | myFoot:my_SmallPad_0-8mmDrill | J3 |
| 1 | SND | myFoot:my_SmallPad_0-8mmDrill | J2 |
| 1 | SW_3PDT | myFoot:my_sw_3pdt | SW1 |
The 31 most common of 33 parts.
Similar boards
- 2 layers127 × 96 mm
Amiga gfxcard
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
33 parts1k - 2 layers92.7 × 58.4 mm
Hacky holidays
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
33 parts915 - 2 layers240 × 120 mm
Quiver PDB 01
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
33 parts617CERN-OHL-S-2.0 - 2 layers75 × 26 mm
DIY detector
ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
33 parts558BSD-2-Clause - 2 layers100 × 50 mm
Pixelix
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.
33 parts447MIT - 2 layers99.1 × 71.1 mm
CONTROLLER Standby Instrument
jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository
33 parts431 - 2 layers65 × 30 mm
Questions
How big is the TypeBP top sideD PCB?
It measures 95.6 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TypeBP top sideD use?
33 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TypeBP top sideD KiCad files?
From the kanengomibako/misc repository on GitHub, at the commit this page was made from: the board is PCB_Enclosure_BP/KiCad7/typeBP-top-sideD.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the TypeBP top sideD design in my own project?
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).