2 layers42 × 12 mm
2 layers
Sensor Array
Kandarp112/Sensor_Array- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 49
- Nets
- 26
- Pads
- 170
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 29 Apr 2025
- Updated
- 4 Jun 2025
Overview
Sensor Array is an open-source printed circuit board by Kandarp112, from the Kandarp112/Sensor_Array repository on GitHub. It is a 2-layer board with 49 parts on 26 nets.
It is built around the TCRT5000L. Its parts include 24 resistors, 12 capacitors, 12 ICs and 1 connector. It belongs with the sensors and measurement boards of this library.
Main components
1README
README.mdSensor_Array
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12 |
| 12 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R4, R6, R8, R10, R12, R14, R16, R18, R20, R22, R24 |
| 12 | 220 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R5, R7, R9, R11, R13, R15, R17, R19, R21, R23 |
| 12 | TCRT5000L | TCRT5000L:XDCR_TCRT5000L | U1, U2, U3, U4, U5, U6, U7, U8, U9, U10, U11, U12 |
| 1 | Conn_01x14_Pin | Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_Vertical | J1 |
Questions
What parts does the Sensor Array use?
49 parts, built around the TCRT5000L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sensor Array KiCad files?
From the Kandarp112/Sensor_Array repository on GitHub, at the commit this page was made from: the board is Sensor Array/Sensor_Array/Sensor_Array.kicad_pcb and its schematic Sensor Array/Sensor_Array/Sensor_Array.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sensor Array design in my own project?
Its repository states no licence, so its author keeps all rights: ask Kandarp112 before reusing the design.
Similar boards
- 2 layers214 × 187.9 mm
Line follower simple
alientanya/line-follower-PCB
A modular PCB platform for Fast Line Follower (FLF) robots, designed to prioritize sensor experimentation and component flexibility.
259 parts2MIT - 2 layers160 × 25.7 mm
- 2 layers45 × 66 mm
- 2 layers365.8 × 174 mm
Line follower simple
CptEdward-MP/RM_Electronics_Central_Library
Over time, every team also writes the same firmware again.
235 parts - 2 layers62 × 47 mm
- 2 layers100 × 100 mm
PCB QuiBot
quibot-dev/QuiBot-3DgesturesApp
🌐 Lloc web del projecte: [https://quibot.upc.edu]
61 partsGPL-3.0 - 2 layers125 × 52 mm
