2 layers8 × 9 mm
2 layers28.5 × 31.5 mm
DA1-DA4 Q1 Adapter
kamoteshake/OpenTendo-Adapters11- Size
- 28.5 × 31.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 31
- Pads
- 82
- Tracks, vias
- 187, 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 19 Nov 2024
- Updated
- 20 Nov 2024
Overview
DA1-DA4 Q1 Adapter is an open-source printed circuit board by kamoteshake, from the kamoteshake/OpenTendo-Adapters repository on GitHub. It is a 2-layer board of 28.5 × 31.5 mm with 31 parts on 31 nets, routed with 187 tracks and 2 vias.
Its parts include 24 diodes, 5 connectors and 1 transistor. It belongs with the interfaces and adapters boards of this library.
README
README.mdOpenTendo-Adapters
Some components of OpenTendo are already obsolete or NRND (Not Recommended for New Design). OpenTendo-Adapters is trying to solve this issue by using a modern equivalent of the OpenTendo components with different footprints and adapting it OpenTendo.
[!NOTE] If for some reason you can't find the components listed in the BOMs and/or decided to find your own, I recommend looking at the
Datasheetsfolder. I've included the datasheets of the components used in OEM NES. Look for components that are close to the original component from OEM NES spec wise and that fits on the footprint in the adapters (or you could always fork this and update your own adapter 😉).
File Structure
.
├── <Reference> Adapter # Contains all files for a specific adapter.
| | "Reference" is based from OpenTendo (i.e. X2 Adapter).
| ├── BOM # Contains the bill of materials.
| ├── Datasheets # Contains the datasheets of component/s used in the OEM NES
| | on the referenced footprint of OpenTendo.
| ├── Gerber Files # Contains The gerber files needed for fabrication.
| └── KiCad # Contains all files necessary to open the project in KiCad. License
Licensed under the TAPR Open Hardware License (www.tapr.org/OHL)
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | D | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +8 |
| 4 | Conn_01x07_Pin | Resistor_THT:R_Array_SIP7 | J1, J2, J3, J4 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | LOGO | Custom:KS_Logo | G*** |
| 1 | Q_PNP_BCE | Package_TO_SOT_SMD:SOT-89-3 | Q1 |
More from kamoteshake/OpenTendo-Adapters
2- 2 layers7.5 × 9 mm
Similar boards
- 2 layers44.5 × 46.9 mm
OSO SWAT B1-jig
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
31 parts2.1k - 2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
31 parts1kGPL-3.0 - 2 layers191 × 98.5 mm
MacroKeypad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
31 parts915 - 2 layers39 × 45.2 mm
CH32V003F4P6-R0-1v1
openwch/ch32v003
CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10
31 parts599 - 2 layers26.7 × 27.9 mm
Breakout board
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
31 parts546MIT - 2 layers100 × 50 mm
Pixelix
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.
31 parts447MIT - 2 layers77.2 × 69.8 mm
- 2 layers103 × 55 mm
Questions
How big is the DA1-DA4 Q1 Adapter PCB?
It measures 28.5 × 31.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DA1-DA4 Q1 Adapter use?
31 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DA1-DA4 Q1 Adapter KiCad files?
From the kamoteshake/OpenTendo-Adapters repository on GitHub, at the commit this page was made from: the board is DA1-DA4_Q1 Adapter/KiCad/DA1-DA4_Q1 Adapter.kicad_pcb and its schematic DA1-DA4_Q1 Adapter/KiCad/DA1-DA4_Q1 Adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DA1-DA4 Q1 Adapter design in my own project?
Its repository states no licence, so its author keeps all rights: ask kamoteshake before reusing the design.