
Analog
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

An open-source solar garden light with animated LEDs
Solar light charlie boost is an open-source printed circuit board by kamorrissey, from the kamorrissey/SolarDaisy repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 73.7 × 22.9 mm with 32 parts on 23 nets, routed with 135 tracks and 8 vias.
Its parts include 8 resistors, 8 diodes, 4 connectors, 3 capacitors and 2 ICs. It belongs with the power boards and the PIC boards of this library.
The SolarDaisy is an open-source solar garden light with animated LEDs. The LEDs animate only in relative darkness. All files needed to reproduce the device are included.
A 2V solar panel charges an AA 1.2V NiMH cell through a 1N5817 Schottky diode to limit current backflow from the cell to the panel. The cell (possibly in addition to the panel) is boosted to 3.3V with a TPS613222 boost-buck regulator. The regulator powers a PIC16F13115 microcontroller (MCU), which drives the LEDs of the light.
There are two groups of LEDs:
There is a circular main PCB. A breakaway portion is used in the charging section of the device.
The post and charging section, with a solar panel and battery holder, from a commercial solar garden walkway light are used to simplify manufacturing. The 3d-printed parts are of modular design so that only one part need be redesigned to use a different walkway light.
There are four primary folders:
Can be built with MPLAB X IDE or MPLAB for VS Code by opening the folder mplab/solar-charlie-16f13115.X in the desired MPLAB tool.
(Remainder to be provided)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | LED | LED_THT:LED_D5.0mm | D2, D3, D4, D5, D6, D7, D8 |
| 3 | 47R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3 |
| 3 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1mm | FID1, FID2, FID3 |
| 2 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7, R8 |
| 2 | 10uF | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C1, C3 |
| 1 | 0R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 100R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 100nF | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C2 |
| 1 | 10uH | Inductor_THT:L_Axial_L5.0mm_D3.6mm_P10.00mm_Horizontal_Murata_BL01RN1A2A2 | L1 |
| 1 | 1N5817 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 2V 130mA | Connector_Wire:SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm | SC1 |
| 1 | 47K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | Conn_01x03_Pin | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J3 |
| 1 | Conn_01x03_Socket | Connector_Wire:SolderWire-0.1sqmm_1x03_P3.6mm_D0.4mm_OD1mm | J4 |
| 1 | Conn_01x08_Socket | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J2 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | J5 |
| 1 | NiMH 1.2V 1300mAh | Connector_Wire:SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm | BT1 |
| 1 | PIC16F13115-E/P | Package_DIP:DIP-8_W7.62mm | U2 |
| 1 | SW_DIP_x02 | Button_Switch_THT:SW_DIP_SPSTx02_Slide_6.7x6.64mm_W7.62mm_P2.54mm_LowProfile | SW1 |
| 1 | TPS613221ADBVR | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U1 |

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


octosavvi/ESPKey
Wiegand data logger, replay device and micro door-controller

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

swharden/AVR-projects
A collection of standalone AVR projects written in C

hardenedlinux/cheap-pcb
Cheap PCB: Better understanding the current status of hardware supply chain
It measures 73.7 × 22.9 mm and has 2 copper layers, 1.6 mm thick.
32 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kamorrissey/SolarDaisy repository on GitHub, at the commit this page was made from: the board is kicad/solar-light-charlie-boost/solar-light-charlie-boost.kicad_pcb and its schematic kicad/solar-light-charlie-boost/solar-light-charlie-boost.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).