

CAN bus transceiver v2
CyberCar project
- Size
- 19.8 × 16 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 7
- Pads
- 15
- Tracks, vias
- 16, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 11 Oct 2016
- Updated
- 6 Jun 2019
Overview
CAN bus transceiver v2 is an open-source printed circuit board by kamikaze, from the kamikaze/cybercar repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 19.8 × 16 mm with 3 parts on 7 nets, routed with 16 tracks and 0 vias.
Its parts include 2 connectors and 1 IC. It belongs with the radio and wireless and interfaces and adapters boards of this library.
README
README.mdCyberCar
This project is for my Audi A6 (C5) 2004. But I'm trying to make it compatible with as many different cars as possible. Some of ideas:
-
Connect to CAN bus and read/write to it.
-
Useful information and/or beautification animation output to one or many displays (OLED?)
-
GPS tracking
-
Connection to internet via WiFi and mobile connection.
-
Multimedia sub-project (as for now - RPi + Pioneer AVH-X7500BT via AV cable)
-
Head/Tail light turn on/off, mode switch (if any) (use RGB led stripes?)
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | CONN_01X02 | Connectors_JST:JST_XH_S02B-XH-A_02x2.50mm_Angled | P2 |
| 1 | CONN_01X05 | Connectors_JST:JST_XH_S05B-XH-A_05x2.50mm_Angled | P1 |
| 1 | TCAN337GDR | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U1 |
Similar boards
- 2 layers40 × 30 mm

- 2 layers51.9 × 16 mm

Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm

- 2 layers

Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm

- 2 layers124.5 × 33.7 mm

- 2 layers10.5 × 83 mm

- 2 layers21.2 × 51.3 mm

Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT
Questions
How big is the CAN bus transceiver v2 PCB?
It measures 19.8 × 16 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CAN bus transceiver v2 use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CAN bus transceiver v2 KiCad files?
From the kamikaze/cybercar repository on GitHub, at the commit this page was made from: the board is pcbs/CAN bus transceiver v2/CAN bus transceiver v2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CAN bus transceiver v2 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).