
Sensor
taichan1113/AdeptBLE
This is alpha version of Ploopy Adept BLE modification.

Took open source Adept BLE design and altered PCB & casing for 3-pin micro switches.
Sensor is an open-source printed circuit board by kaihchang, from the kaihchang/Adept_BLE_3-pin repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 62 × 64 mm with 23 parts on 24 nets, routed with 168 tracks and 21 vias.
It is built around the D2LS-21. Its parts include 9 capacitors, 6 switches, 4 connectors, 2 ICs and 1 resistor. It belongs with the radio and wireless and sensors and measurement boards of this library.
Took open source Adept BLE design and altered PCB & casing for 3-pin micro switches.
Note that the casing is designed for 1.2mm thick PCBs. Very important.
My version of ZMK firmware is here.
Altered PCB:
Altered cases:

Finished build:

Supports BTU and magnet caps. BTW I used CY-8H BTUs and wasn't really satisfied with the quality, even after lubing with grease. SP-8 ones may be a better bet if Rexroth R053XX8XX (7210) isn't available or out of price range.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | D2LS-21 | kbd:SW_D2FC-1F_3_OMR_edit | SW1, SW2, SW3, SW4, SW5, SW6 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C7 |
| 2 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2, J3 |
| 1 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 100n (X7R) | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 10n (X7R) | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 10u (X7R) | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 2M | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 3.3u/16V | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J4 |
| 1 | Conn_01x02 | Connector_JST:JST_XH_S2B-XH-A-1_1x02_P2.50mm_Horizontal | J1 |
| 1 | PMW3610 | mylib:PMW3610 | U2 |
| 1 | SW_SPDT | Button_Switch_THT:SW_Slide_SPDT_Straight_CK_OS102011MS2Q | PSW1 |
| 1 | TCR2EF19 | Package_TO_SOT_SMD:SOT-23-5 | U1 |

taichan1113/AdeptBLE
This is alpha version of Ploopy Adept BLE modification.

ufan/sensor_bed
A PCB with various kinds of sensors like optical mouse sensor, joystick, encoder, capacitive sliders etc.


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards




It measures 62 × 64 mm and has 2 copper layers, 1.29 mm thick.
23 parts, built around the D2LS-21. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kaihchang/Adept_BLE_3-pin repository on GitHub, at the commit this page was made from: the board is pcb_electronics/sensor.kicad_pcb and its schematic pcb_electronics/sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).