Skip to the content
4 layers80 × 80 mmPathogen Pedal prerouting, the printed circuit board in 3D

Pathogen Pedal prerouting

kaiduchane/ABASI-PATHOS-clone

DIY clone of the ABASI Pathos distortion pedal

Size
80 × 80 mm
Copper layers
4
Thickness
1.6 mm
Parts
180
Nets
56
Pads
408
Tracks, vias
388, 1
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
5 Feb 2026
Updated
5 Feb 2026

Overview

Pathogen Pedal prerouting is an open-source printed circuit board by kaiduchane, from the kaiduchane/ABASI-PATHOS-clone repository on GitHub. It is a 4-layer board of 80 × 80 mm with 180 parts on 56 nets, routed with 388 tracks and 1 via.

It is built around the NJM4580D. Its parts include 73 resistors, 72 capacitors, 12 diodes, 6 ICs and 1 connector. It belongs with the audio and music boards of this library.

Main components

1

README

README.md

ABASI-PATHOS-clone

The Abasi Pathos is a modern high-gain distortion pedal designed by guitarist Tosin Abasi and Horizon Devices. This project is an open-source clone that reverse-engineers the circuit for educational purposes and DIY builders. This pedal features a three-band active EQ, dual-stage clipping circuit, and tight low-end response designed for modern progressive metal tones. The design uses through-hole components where possible to make it accessible for beginners while maintaining the sonic characteristics of the original. Key Features:

Adjustable gain structure with asymmetrical clipping Active 3-band EQ (Bass/Mid/Treble) High input impedance JFET buffer True bypass switching Standard 9V center-negative power

Parts

180
QtyValueFootprintReferences
3210K_MB_resistors:0.5%22R102, R102, R103, R103, R104, R104, R105, R105, R106, R106, R107, R107, R108, R108, R109, R109 +16
16100u_MB_caps-elec:0503C100, C100, C101, C101, C105, C105, C106, C106, C107, C107, C108, C108, C109, C109, C110, C110
121uCapacitor_THT:C_Axial_L12.0mm_D6.5mm_P15.00mm_HorizontalC6, C6, C9, C9, C11, C11, C16, C16, C19, C19, C24, C24
10100n_MB_caps-film:5mm_1n-300nC14, C14, C20, C20, C102, C102, C103, C103, C104, C104
101K_MB_resistors:0.3%22.BR2, R2, R5, R5, R9, R9, R12, R12, R16, R16
101N4148_MB_diodes:DO41-2D1, D1, D2, D2, D3, D3, D4, D4, D5, D5
8470K_MB_resistors:0.3%22.BR3, R3, R8, R8, R15, R15, R17, R17
847nCapacitor_THT:C_Axial_L17.0mm_D6.5mm_P20.00mm_HorizontalC13, C13, C15, C15, C17, C17, C22, C22
6220n_MB_caps-film:5mm_1n-300nC2, C2, C3, C3, C8, C8
6220p_MB_caps-film:5mm_10p-180nC1, C1, C7, C7, C10, C10
647K_MB_resistors:0.3%22.BR10, R10, R18, R18, R19, R19
6NJM4580D_MB_integrated_circuits:DIP08IC1, IC1, IC2, IC2, IC3, IC3
4330p_MB_caps-film:7.62mmC21, C21, C23, C23
433K_MB_resistors:0.4%22R20, R20, R21, R21
44n7_MB_caps-film:5mm_1n-300nC12, C12, C25, C25
3A100K_MB_potentiometers:16MM_PADS.2Gain101, Mid101, Volume101
2100K_MB_resistors:0.2%22R11, R11
210R_MB_resistors:0.3%22.BR101, R101
21M_MB_resistors:0.3%22.BR1, R1
233n_MB_caps-film:7.62mmC4, C4
2470p_MB_caps-film:5mm_10p-180nC18, C18
24K7_MB_resistors:0.3%22.BR14, R14
2560p_MB_caps-film:7.62mmC5, C5
2680K_MB_resistors:0.3%22.BR22, R22
26K8_MB_resistors:0.3%22.BR6, R6
11N5817_MB_diodes:DO35-3D100
11N5817_MB_diodes:DO35-4D100
14k7_MB_resistors:0.3%22.BR100
1A50K_MB_potentiometers:16MM_PADS.2Treble101
1B100k_MB_potentiometers:16MM_PADS.2Bass101
1BASS_MB_potentiometers:16MM_PADS.1BASS
1Conn_01x04_MB_supply_pins:IO.2J101
1GAIN_MB_potentiometers:16MM_PADS.1GAIN
1GND_MB_supply_pins:PAD3GND1
1MID_MB_potentiometers:16MM_PADS.1MID
1PWR_MB_supply_pins:PAD3PWR+1
1SW_SPDT_MB_switches:SPDT.WIREwireSW1
1SW_SPDT_MB_switches:SPDT.MINISW1
1SigIN_MB_supply_pins:PAD3SigIN1
1SigOUT_MB_supply_pins:PAD3SigOUT1
1TREBLE_MB_potentiometers:16MM_PADS.1TREBLE
1VOLUME_MB_potentiometers:16MM_PADS.1VOLUME

More from kaiduchane/ABASI-PATHOS-clone

1
  • 4 layers82 × 75 mmPathogen Pedal, the printed circuit board in 3D

    Pathogen Pedal

    kaiduchane/ABASI-PATHOS-clone

    DIY clone of the ABASI Pathos distortion pedal

    91 parts

Similar boards

  • 4 layers152 × 61.5 mmAudio board, the printed circuit board in 3D

    Audio board

    FOSDEM/video

    No longer being updated, please see the README for pointers.

    180 parts114
  • 4 layers100.5 × 62.5 mmBaset1-media converter, the printed circuit board in 3D

    Baset1-media converter

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    180 parts17BSD-3-Clause
  • 4 layers50 × 110 mmEncore, the printed circuit board in 3D

    Encore

    lennartquerter/euro-rack-synth

    Lenimal Github for DIY for a Eurorack Synth

    180 parts13
  • 4 layers100 × 100 mmIdeal groove box, the printed circuit board in 3D

    Ideal groove box

    centrevillage/ideal-groove-box

    理想のグルーブボックスは俺たちの手で作る

    180 parts10MIT
  • 4 layers110 × 90 mmURC, the printed circuit board in 3D

    URC

    spikonado/URC

    Universal Robot Controller

    180 parts2CERN-OHL-W-2.0
  • 4 layers100 × 100 mmCentral ECU, the printed circuit board in 3D

    Central ECU

    UC-Aerospace/Hybrid25_ECU

    The central ECU is pretty simple and carries out a couple of tasks. Firstly is comms which is easy to see with CAN on the left and RS422 on the right of the schematic.

    180 parts1
  • 4 layers130 × 90 mmPhase2-module, the printed circuit board in 3D

    Phase2-module

    udaravima/Lab_Bench

    A modular, rack-style DC power supply: up to 8 hot-pluggable 600 W buck modules on a shared DC input bus, coordinated by a central manager over CAN.

    180 parts1GPL-3.0

Questions

How big is the Pathogen Pedal prerouting PCB?

It measures 80 × 80 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Pathogen Pedal prerouting use?

180 parts, built around the NJM4580D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pathogen Pedal prerouting KiCad files?

From the kaiduchane/ABASI-PATHOS-clone repository on GitHub, at the commit this page was made from: the board is Pathogen_Pedal/Pathogen_Pedal-backups/Pathogen_Pedal_prerouting.kicad_pcb and its schematic Pathogen_Pedal/Pathogen_Pedal.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pathogen Pedal prerouting design in my own project?

Its repository states no licence, so its author keeps all rights: ask kaiduchane before reusing the design.