2 layers50 × 50 mm
Cartridge Breakout Board
kaibader/Sharp-PC-Breakout-Boards
Breakout Board for the internal 40 Pin Connector of the Sharp PC-1500/PC-1600 Pocket Computer
9 parts6
2 layers80 × 46 mm
Breakout board
kaibader/Sharp-PC-Breakout-Boards6Breakout Board for the internal 40 Pin Connector of the Sharp PC-1500/PC-1600 Pocket Computer
- Size
- 80 × 46 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 52
- Pads
- 124
- Tracks, vias
- 464, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 23 Jun 2018
- Updated
- 20 May 2021
Overview
Breakout board is an open-source printed circuit board by kaibader, from the kaibader/Sharp-PC-Breakout-Boards repository on GitHub. It is a 2-layer board of 80 × 46 mm with 17 parts on 52 nets, routed with 464 tracks and 0 vias.
Its parts include 11 connectors, 2 resistors and 2 diodes. It belongs with the interfaces and adapters and microcontroller boards boards of this library.
README
README.mdSharp-PC-Breakout-Boards
Various Breakout Boards for the Sharp PC-1500/1600 Series
40-Pin Cartridge Breakout Boards for the Sharp PC-1500/1600 Series
v1.0
I've ported the two breakout boards from EagleCAD to KiCad. The design of two breakout boards was also slightly improved. There is no functional difference to the older revisions.
v0.1
Initial release, designed in EagleCAD (which I'm not using anymore).
Breakout Board for 60 Pin Connector of the Sharp PC-1500/PC-1600 Series
The breakout board was designed to allow easy access to all pins of the Sharp PC connector.
v1.0
Upated the connector layout: Fixed an issue with a falsely documented FGND pin. Slight improvements in the layout.
v0.2
Replaced the 1.27 mm pin header: the HIF6A-60PA-1.27DS is compatible with the discontinued JAE PICL-60P-LT (original Sharp-PC connector). The whole PCB was redesigned: functional units (e.g. data bus, address bus) are now combined.
v0.1
Initial release, based on a 1.27 mm pin header. Designed in EagleCAD (which I'm not using anymore).
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 1 | 1.2k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 470 | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 4V7 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J8 |
| 1 | 4V7 | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | 60-Pin Connector | Sharp_PC_Connector:HIF6A-60PA-1.27DS | P1 |
| 1 | A-BUS | Connector_PinHeader_2.54mm:PinHeader_2x08_P2.54mm_Vertical | J5 |
| 1 | BATT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | BATT | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | CMT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | D-BUS | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J6 |
| 1 | FGND | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | GND | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J10 |
| 1 | NC | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | PINS1 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | PINS2 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J3 |
More from kaibader/Sharp-PC-Breakout-Boards
2- 2 layers37.1 × 31.8 mm
Breakout Cartridge
kaibader/Sharp-PC-Breakout-Boards
Breakout Board for the internal 40 Pin Connector of the Sharp PC-1500/PC-1600 Pocket Computer
5 parts6
Similar boards
- 2 layers50 × 35 mm
- 2 layers139.7 × 62.2 mm
- 2 layers29.2 × 55.9 mm
Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
17 parts1kGPL-3.0 - 2 layers24.5 × 36.5 mm
- 2 layers56.3 × 55.7 mm
StarNecklace
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
17 parts915 - 2 layers25 × 25 mm
SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT - 2 layers38.9 × 16.1 mm
- 2 layers36 × 51 mm
Questions
How big is the Breakout board PCB?
It measures 80 × 46 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Breakout board use?
17 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Breakout board KiCad files?
From the kaibader/Sharp-PC-Breakout-Boards repository on GitHub, at the commit this page was made from: the board is breakout-board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Breakout board design in my own project?
Its repository states no licence, so its author keeps all rights: ask kaibader before reusing the design.