

DualMixer
Open hardware eurorack synth modules
- Size
- 35.6 × 107.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 38
- Pads
- 146
- Tracks, vias
- 326, 49
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 9 Sep 2022
- Updated
- 18 Dec 2024
Overview
DualMixer is an open-source printed circuit board by jypma, from the jypma/modsynth repository on GitHub. It is a 2-layer board of 35.6 × 107.9 mm with 45 parts on 38 nets, routed with 326 tracks and 49 vias.
Its parts include 24 resistors, 10 capacitors, 4 diodes, 3 ICs and 3 connectors. It belongs with the audio and music boards of this library.
README
README.mdEurorack modules collection

This repository contains a collection of eurorack module open hardware designs. It is a combination of designs found elsewhere (with references where relevant), and designs by me.
All schematics and boards are in Kicad format, and schematics, board and gerber exports are automated using KiBot and docker (see export.sh).
Modules
The following modules are available:
- A AS3340-based oscillator designed by me (based on a combination of earlier designs from the internet)
- A PT2399-based delay designed by me (based on a combination of earlier designs from the internet)
- A Dual 4-channel mixer module designed by me (based on basic opamp mixer essentials)
- A Quad Attenuverter with offset, based on an internet design
- Ornament & Crime, a well-known open hardware design
- Ray Wilson's Dual-VCA as originally designed by Gerbrand Sterrenburg
- Roland System 100 ADSR as originally designed by Gerbrand Sterrenburg
- The YUSynth Steiner VCF as originally designed by Gerbrand Sterrenburg
- Music Thing Modular's Turing Machine, a well-known open hardware design
Utilities
- A 16-bin DIP to SOIC adapter board (to mount SOIC chips on DIP sockets)
- A Power distribution board for eurorack modules
Combined bill of material and shopping list
I'm maintaining a merged bill of material for all modules, with component lists in stock at time of writing.
The only exception is the Teensy 3.0 / 3.1 / 3.2 required for Ornament & Crime. Those are impossible to find at the moment (I happen to have some, hence it's on the list).
Generating BOM, gerbers, and pictures
The script export.sh in the root of the project will generate or update the artifacts in the export/ directory, such as BOMs, gerber files, packages, and various documentation pictures. Most of these files are not version-controlled (but those linked from the markdown documentation are).
Whenever changing a schematic, the export script will update the relevant pictures and artifacts. Re-exporting the same schematic will result in the same picture, so git plays nice with this.
Link for simulation of triangle to sine converter
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 47k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R5, R10, R11, R12, R13, R14, R16 |
| 8 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6, C9, C10 |
| 4 | 1N4007 | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D1, D3, D5, D6 |
| 3 | TL074 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U1, U2, U3 |
| 2 | 10 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R23, R24 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R19 |
| 2 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C7, C8 |
| 2 | 140k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R15 |
| 2 | 2.2k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R22 |
| 2 | 220k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R17 |
| 2 | 33k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R18 |
| 2 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20, R21 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J13 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J12 |
| 1 | Conn_02x07_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Vertical | J5 |
The 44 most common of 45 parts.
More from jypma/modsynth
12- 2 layers39.4 × 107.9 mm

- 2 layers34.9 × 107.9 mm

- 4 layers107 × 49.5 mm

- 2 layers19 × 107.9 mm

- 2 layers108 × 48.3 mm

- 2 layers39.4 × 107.9 mm

- 2 layers35.6 × 108 mm

- 2 layers38.1 × 99.1 mm

- 2 layers108 × 35.6 mm

- 4 layers107 × 49.5 mm

- 2 layers34.9 × 108 mm

- 2 layers35.6 × 108 mm

Similar boards
- 2 layers30 × 61.3 mm

- 2 layers97 × 78.5 mm

Dumbpad
imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro
45 parts517GPL-2.0 - 2 layers49.8 × 88.9 mm

- 2 layers26.5 × 34.4 mm

PicoLoaderNSB
makeo/PicoLoader
A cheap and easy to install modchip for the Nintendo GameCube!
45 parts320GPL-2.0 - 2 layers40.2 × 19 mm

- 2 layers63.5 × 63.5 mm

Main pcb
peterkrull/quad
Firmware, hardware and documentation for my autonomous quad copter project
45 parts210GPL-3.0 - 2 layers99.1 × 81.9 mm

RC6502 Terminal
tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!
45 parts193GPL-3.0 - 2 layers116.1 × 94.7 mm

Questions
How big is the DualMixer PCB?
It measures 35.6 × 107.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DualMixer use?
45 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DualMixer KiCad files?
From the jypma/modsynth repository on GitHub, at the commit this page was made from: the board is DualMixer/mainboard/mainboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DualMixer design in my own project?
Its repository states no licence, so its author keeps all rights: ask jypma before reusing the design.