
Phils Lab #165
ctrl-z3d/pcb-designs
A personal archive of PCB projects I've designed and built along the way. Schematics, board layouts, manufacturing files, and notes.

Custom MSPM0G3507 microcontroller development board designed in KiCad
MPSM0 PCB is an open-source printed circuit board by jvillarreal2, from the jvillarreal2/mspm0-dev-board repository on GitHub. It is a 2-layer board of 62.5 × 29.5 mm with 37 parts on 61 nets, routed with 332 tracks and 177 vias.
It is built around the MSPM0G3507SPTR, CH340E and LIS2DH, with the SPX3819M5-L-3-3 and USBLC6-2SC6 among its other parts. Its parts include 14 capacitors, 8 resistors, 4 ICs, 2 connectors and 1 diode. It belongs with the microcontroller boards boards of this library.
custom 2-layer development board designed in KiCad.
REV A — Design complete, awaiting fabrication. Not final — known improvements for REV B:




| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 470nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C5, C6, C11, C13, C14, C15 |
| 5 | 5k1 | Resistor_SMD:R_0603_1608Metric | R1, R2, R5, R6, R7 |
| 4 | M1 | MountingHole:MountingHole_3.2mm_M3_Pad_Via | MH1, MH2, MH3, MH4 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C4, C7, C12 |
| 3 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3 |
| 2 | 0 | Resistor_SMD:R_0603_1608Metric | R3, R8 |
| 2 | 15pF | Capacitor_SMD:C_0603_1608Metric | C8, C10 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 8MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | CH340E | Package_SO:MSOP-10_3x3mm_P0.5mm | U2 |
| 1 | Conn_ARM_SWD_TagConnect_TC2030 | Connector:Tag-Connect_TC2030-IDC-FP_2x03_P1.27mm_Vertical | J2 |
| 1 | LIS2DH | Package_LGA:LGA-14_2x2mm_P0.35mm_LayoutBorder3x4y | U4 |
| 1 | MSPM0G3507SPTR | Package_QFP:LQFP-48_7x7mm_P0.5mm | U3 |
| 1 | SPX3819M5-L-3-3 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | D1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |

ctrl-z3d/pcb-designs
A personal archive of PCB projects I've designed and built along the way. Schematics, board layouts, manufacturing files, and notes.

hykoser/LIS2DH-Accelerometer-Board
A custom accelerometer development board designed with KiCad and MSPM0 microcontroller.

prashantbhandary/mspmo-baord
A compact USB-C development board for TI's MSPM0G3507 (Arm Cortex-M0+, 80 MHz, 128 KB flash, 32 KB SRAM), with an on-board USB-to-UART bridge, a 3-axis accelerometer and a Tag-Connect SWD footprint.

adityajoshi2008/MSPM0-DevKit
🌐 ARM Cortex-M0+ • KiCad 10.0 • Open Source • PCB Hardware


basillx1/mspm0-accelerometer-board
2-layer KiCad board: TI MSPM0 MCU + LIS2DH accelerometer, USB-C, SWD debug

benbruder/MSPM0
Design of schematic and PCB for a TI MSPM0-based MCU with all of its components.

It measures 62.5 × 29.5 mm and has 2 copper layers, 1.6 mm thick.
37 parts, built around the MSPM0G3507SPTR, CH340E, LIS2DH and SPX3819M5-L-3-3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jvillarreal2/mspm0-dev-board repository on GitHub, at the commit this page was made from: the board is MPSM0 PCB.kicad_pcb and its schematic MPSM0 PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jvillarreal2 before reusing the design.