
Fallout
justinnova0915/fallout
ENDFIELD inspired hardware deck for tiling window managers.

ENDFIELD inspired hardware deck for tiling window managers.
Left Wing is an open-source printed circuit board by justinnova0915, from the justinnova0915/fallout repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 68 × 72.5 mm with 23 parts on 15 nets, routed with 56 tracks and 0 vias.
Its parts include 9 diodes, 9 switches and 1 connector.
The TALOS-01 is a desktop device designed to make navigating workspace-heavy, tiling operating systems (like Arch Linux Hyprland or macOS) more straightforward by making it physical. No more memorizing convoluted keyboard shortcuts just to move a window. This is my Fallout project for Hack Club, so I'm super excited to share it!

Tiling window managers like Hyprland are great, but relying entirely on abstract keybinds can get annoying and lacks physical intuition. The goal of TALOS-01 is to turn window and workspace management into a tactile experience.
The TALOS-01 design is heavily inspired by the design language of Arknights: Endfield. The entire body uses a matching color palette of black, grey, white, and yellow, detailed with topographic lines and techy text accents.

Disclaimer: This project is a non-commercial, fan-made creation featuring visual and UI assets inspired by Arknights: Endfield, which remain the intellectual property of Hypergryph.
PCB and circuitry:
It's built around a custom parent PCB that hosts every single chip. The board has exposed headers to connect to the moving slider handle and the macro pad (excuse any messy routing) ;).
To power it, you can plug in USB-C to feed the TP4056 charging circuit, or let it run completely wireless off the 18650 batteries. Power leaving the circuit is stepped up using two independent MT3608 boost converters (a 12V line for the smart display and a 5V line for the ESP32 and voltmeter), before hitting an AMS1117-3.3 linear regulator for the shared sensor bus.

The Slider & Encoder: The custom 3D-printed handle rides on the MGN7H rail and holds a DRV2605 driver with a motor to deliver physical haptic feedback clicks as you pass items. Distance tracking is calculated using two SS49E hall effect sensors positioned exactly a quarter turn from each other on the bottom of the block. All sensors and drivers tucked inside the moving handle connect back to the parent PCB via a Flat Flexible Cable (FFC).
Macro Pad: To avoid a massive, fragile bundle of wires across the split-enclosure gap, I put a PCF8574 IO expander to condense the 3x3 matrix, gauge, and power button down into a simple 4-line I2C bus, meaning the whole wing connection only needs 7 physical pogo pins to bridge the gap! The analog needle gauge runs on a 5V scale, but the ESP32 can only natively supply a 3.3V logic signal. I put together a simple 2N3094 transistor circuit to shift the downstream signal up cleanly to the required 5V.
The screen graphics are built and flashed to the hardware independently using DWIN's native configuration environment and software utility tools. This allows the smart display to handle its own graphics processing over an 8-pin connection to the ESP32. This stops the ESP32 from lagging out under heavy rendering, so it can focus purely on passing lightweight UI control commands over UART!
On the desktop side, a custom-written daemon in GOLANG runs continuously to translate signals coming from the ESP32 over Bluetooth and send information to the device.
Fallout_PCB.Fallout_CAD, and assemble according to the 3d model.

Fallout_Software/Firmware project in your environment, then build and flash using vscode's esp-idf tool.The desktop side uses a custom daemon written in GO that runs continuously to catch Bluetooth strings from the ESP32 and talk to your window manager.
cd Fallout_Software/Daemongo build main.gohyprland.conf:
exec-once = /path/to/talos-daemonI got most of my components in person in China, but I have found equivalents for around the same price on Taobao, so that is what my BOM is going to be based off of.
You can get the BOM here.
The CAD files are under Fallout_CAD. I designed it in Fusion so you can find the f3d and stp files there.
Since I was using the breakout or module versions of most ICs (it's my first PCB!), I had to make custom symbol and footprints for them.
The KiCAD source files are under Fallout_PCB
The ESP32 code is written in C++ using ESP-IDF, and the Hyprland Daemon is written in GO.
The Code is under Fallout_Software
Thanks so much to the folks on Discord and Reddit for reviewing and helping me refine the electronics! Thanks also to Hack Club for running the Fallout event which sponsored this hardware build!
This project is licensed under GNU GPLv3.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 1N4148 | Diode_SMD:Nexperia_CFP3_SOD-123W | D1, D2, D3, D4, D5, D6, D7, D8, D9 |
| 9 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_Plate | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 |
| 4 | MountingHole | MountingHole:MountingHole_2mm | H1, H2, H3, H4 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |

justinnova0915/fallout
ENDFIELD inspired hardware deck for tiling window managers.


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards






Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
It measures 68 × 72.5 mm and has 2 copper layers, 1.6 mm thick.
23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the justinnova0915/fallout repository on GitHub, at the commit this page was made from: the board is Fallout_PCB/Left_Wing/Left_Wing.kicad_pcb and its schematic Fallout_PCB/Fallout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).