Skip to the content
2 layers60 × 34.2 mmLibre MiG IO Controller, the printed circuit board in 3D

Libre MiG IO Controller

JustEnoughDucks/LibreMiG-S24

Open Source Joystick/Open Source Flightstick that combines the Olukelu Gimbal with a MiG-31 inspired Flightstick designed for Star Citizen or space simulators

Size
60 × 34.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
42
Nets
51
Pads
171
Tracks, vias
385, 33
Pours
1
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
14 Oct 2022
Updated
29 Dec 2024

Overview

Libre MiG IO Controller is an open-source printed circuit board by JustEnoughDucks, from the JustEnoughDucks/LibreMiG-S repository on GitHub. It is a 2-layer board of 60 × 34.2 mm with 42 parts on 51 nets, routed with 385 tracks and 33 vias.

It is built around the MAX11615EEE+T and TCA9535PWR(UMW). Its parts include 15 capacitors, 8 connectors and 3 ICs. It belongs with the keyboards and input boards of this library.

Main components

2

README

README.md

LibreMiG-S

[blocked]

Contributors Forks Stargazers Issues CERN-OHL-v2-S


Logo

LibreMiG-S

Open Source Joystick/Open Source Flightstick that combines the Olukelu Gimbal with a MiG-31 inspired Flightstick designed for Star Citizen or space simulators
View Demo · Report Bug · Request Feature

Table of Contents
  1. About The Project
  2. Getting Started
  3. Usage
  4. Roadmap
  5. Contributing
  6. License
  7. Contact
  8. Acknowledgments

About The Project

I saw few options for open-source flight sticks out there. Commercial options are exceedingly expensive. I strive to build a full-featured and high-quality Flightstick with a target BOM cost from 150-200€. It is not meant to be the cheapest joystick, but it does aim to be the most attractive option for open-source and DIY enthusiasts.

BOMs, parts lists, and documentation for various gimbals and 3D printed joysticks are sparse at best. I aim to include an extremely comprehensive requirements list, drop-in replacement part list, etc... so that this will be as accessible to everyone who has interest in building their own stick.

This is very open to all contributions and improvements from the community.

(back to top)

Built With

(back to top)

Getting Started

This process is hopefully as painless as possible. It will take hours of printing, some of soldering, assembling, and testing to make sure everything works. In order to have the most quality product as possible and respect the supply chain issues everyone has, I chose the cheapest, most available chip that is also easy to solder onto the PCB, but also has integrated USB so you don't need to search for an elusive USB HID FTDI chip. Everything can be assembled and disassembled repeatedly in principle (minimal/no direct screw to print interfaces)

I also added alternate electronics headers so that one can use an STM32 Bluepill in place of the USB, MCU, and power components if you don't like soldering. The upside to this is that I may be able to make a firmware profile compatible with FreeJoy in the future. I will have to look into compatibility with I2C peripherals in FreeJoy. If one is using the embedded MCU, then it will require the custom firmware. Everything should be plug-and-play with no drivers needed because proper USB descriptors will be developed.

Prerequisites

This is a very general list of the materials you will need to assemble and program the stick. All BOM items are assumed to be ordered and received.

  • 3D Printer
  • Soldering Iron/Soldering Station + solder + flux paste/pen
  • Microscope for soldering
  • Hex key drivers and philips 0 screwdriver (dependent on your bolt choice)
  • Mechanical and electrical BOM materials
  • Manufactured PCBs
  • ST-Link V2 or STM32F0 disovery board + jumpers for programming MCU
  • USB-C cable
  • PC running Linux or Windows
  • STM32CubeProgrammer or PlatformIO on VSCode/Code-OSS

Installation

(back to top)

Usage

(back to top)

Roadmap

  • 3D printed shells and parts designed
  • 3D printed parts fully printable and assemblable
  • PCBs made in single panel and multi-board configurations
  • Windows and Linux compatible firmware
    • Firmware can detect a TM/Virpil grip and fall back into "basic mode"
    • Drivers if needed
  • Assembly Instructions
    • Video
  • Button binding instructions
    • Video
  • BOM for electronics
  • BOM for mechanics
  • Cost estimates for 1 american, 1 european, and 1 chinese manufacturers
  • Documentation
  • Possibly selling electronics kits or assembed kits?

See the open issues for a full list of proposed features (and known issues).

(back to top)

Contributing

Contributions are what make the open source community such an amazing place to learn, inspire, and create. Any contributions you make are greatly appreciated.

If you have a suggestion that would make this better, please fork the repo and create a pull request. You can also simply open an issue with the tag "enhancement". Don't forget to give the project a star! Thanks again!

  1. Fork the Project
  2. Create your Feature Branch (git checkout -b feature/AmazingFeature)
  3. Commit your Changes (git commit -m 'Add some AmazingFeature')
  4. Push to the Branch (git push origin feature/AmazingFeature)
  5. Open a Pull Request

(back to top)

License

Distributed under the CERN-OHL-S-v2 License. See LICENSE for more information.

(back to top)

Contact

Project Link: https://github.com/JustEnoughDucks/LibreMiG-S

(back to top)

Acknowledgments

  • [blocked]
  • [blocked]
  • [blocked]

(back to top)

Parts

42
QtyValueFootprintReferences
12100nFCapacitor_SMD:C_0603_1608MetricC25, C33, C34, C35, C36, C37, C38, C39, C40, C41, C42, C43
8TestPointTestPoint:TestPoint_Pad_D1.0mmTP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10
4Conn_01x03Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_VerticalJ8, J9, J10, J14
4R_Network05Resistor_THT:R_Array_SIP6RN3, RN4, RN5, RN6
3100nFCapacitor_SMD:C_0805_2012MetricC14, C15, C16
210kResistor_SMD:R_0805_2012Metriclocked, R8
2TCA9535PWRPackage_SO:TSSOP-24_4.4x7.8mm_P0.65mmU2, U3
1Conn_01x05Connector_JST:JST_PH_B5B-PH-K_1x05_P2.00mm_VerticalJ13
1Conn_01x06Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_VerticalJ15
1Conn_01x08Connector_JST:JST_PH_B8B-PH-K_1x08_P2.00mm_VerticalJ12
1Conn_01x08Connector_JST:JST_PH_S8B-PH-K_1x08_P2.00mm_HorizontalJ11
1MAX11615EEEPackage_SO:QSOP-16_3.9x4.9mm_P0.635mmU6

The 40 most common of 42 parts.

More from JustEnoughDucks/LibreMiG-S

7
  • 2 layers161.1 × 95 mmLibre MIG, the printed circuit board in 3D

    Libre MIG

    JustEnoughDucks/LibreMiG-S

    Open Source Joystick/Open Source Flightstick that combines the Olukelu Gimbal with a MiG-31 inspired Flightstick designed for Star Citizen or space simulators

    279 parts24
  • 2 layers130 × 55 mmLibre MiG MCU, the printed circuit board in 3D

    Libre MiG MCU

    JustEnoughDucks/LibreMiG-S

    Open Source Joystick/Open Source Flightstick that combines the Olukelu Gimbal with a MiG-31 inspired Flightstick designed for Star Citizen or space simulators

    56 parts24
  • 2 layers20 × 20 mmLibre MiG USB, the printed circuit board in 3D

    Libre MiG USB

    JustEnoughDucks/LibreMiG-S

    Open Source Joystick/Open Source Flightstick that combines the Olukelu Gimbal with a MiG-31 inspired Flightstick designed for Star Citizen or space simulators

    22 parts24
  • 2 layers46.9 × 54.7 mmLibre MiG Face Plate, the printed circuit board in 3D

    Libre MiG Face Plate

    JustEnoughDucks/LibreMiG-S

    Open Source Joystick/Open Source Flightstick that combines the Olukelu Gimbal with a MiG-31 inspired Flightstick designed for Star Citizen or space simulators

    15 parts24
  • 2 layers18 × 35 mmLibre MiG trigger, the printed circuit board in 3D

    Libre MiG trigger

    JustEnoughDucks/LibreMiG-S

    Open Source Joystick/Open Source Flightstick that combines the Olukelu Gimbal with a MiG-31 inspired Flightstick designed for Star Citizen or space simulators

    6 parts24
  • 2 layers18 × 28 mmLibre MiG Back, the printed circuit board in 3D

    Libre MiG Back

    JustEnoughDucks/LibreMiG-S

    Open Source Joystick/Open Source Flightstick that combines the Olukelu Gimbal with a MiG-31 inspired Flightstick designed for Star Citizen or space simulators

    4 parts24
  • 2 layersLibre MiG encoder, the printed circuit board in 3D

    Libre MiG encoder

    JustEnoughDucks/LibreMiG-S

    Open Source Joystick/Open Source Flightstick that combines the Olukelu Gimbal with a MiG-31 inspired Flightstick designed for Star Citizen or space simulators

    2 parts24

Similar boards

  • 2 layers59 × 42 mmKivar demo, the printed circuit board in 3D

    Kivar demo

    markh-de/KiVar

    PCB Assembly Variants for KiCad

    66 parts65MIT
  • 6 layers68.8 × 74.6 mmFurbyBoard, the printed circuit board in 3D

    FurbyBoard

    Guilleloma/Furby-GPT

    This project transforms a 1998 Furby into an interactive and advanced desktop assistant using a Raspberry Pi W. It incorporates OpenAI and Whisper for natural language processing, primarily relying on Google Cloud Text…

    158 parts26
  • 4 layers154.5 × 112.9 mmLibrePLC32, the printed circuit board in 3D

    LibrePLC32

    AndreiVladescu/LibrePLC32

    The goal of the project is to create a compact, hackable, and well-documented PLC platform for industrial automation experiments, prototyping, education, and open hardware development.

    295 parts14CERN-OHL-P-2.0
  • 4 layers68 × 68 mmBackbone, the printed circuit board in 3D

    Backbone

    andreapiccini/spaghettilab-community

    SpaghettiLab is an open modular hardware and software ecosystem for rapid prototyping, embedded systems development, and product innovation.

    212 parts10
  • 4 layers94.3 × 81.8 mmYukaLink revA, the printed circuit board in 3D

    YukaLink revA

    Misaka0x2730/YukaLink

    Dual targets USB+ETH ARM JTAG/SWD debugger (BlackMagic port) based on RP2350. JTAG and SWD interfaces are implemented on PIO.

    321 parts3GPL-3.0
  • 4 layers100 × 52 mmSom exp carrier, the printed circuit board in 3D

    Som exp carrier

    andrempmattos/procsys-testsuite

    Processing Systems Test Suite

    106 parts1
  • 2 layers205 × 170 mmEchessboard, the printed circuit board in 3D

    Echessboard

    benjibst/echessboard

    electronic chess board schematic and PCB layout using STM32 microcontroller and hall sensors for detecting pieces

    165 parts1
  • 4 layers243.2 × 134 mmSimulation Main Board, the printed circuit board in 3D

    Simulation Main Board

    Swimnato/Simulation-Main-Board

    A universal Main board developed for the Christa McAuliffe Space center

    564 parts1MIT

Questions

How big is the Libre MiG IO Controller PCB?

It measures 60 × 34.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Libre MiG IO Controller use?

42 parts, built around the MAX11615EEE+T and TCA9535PWR(UMW). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Libre MiG IO Controller KiCad files?

From the JustEnoughDucks/LibreMiG-S repository on GitHub, at the commit this page was made from: the board is Electronics/source/separate_pcbs/libre-MiG IO Controller/libre-MiG IO Controller.kicad_pcb and its schematic Electronics/source/IO_controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Libre MiG IO Controller design in my own project?

Its repository states no licence, so its author keeps all rights: ask JustEnoughDucks before reusing the design.