4 layers86 × 56 mm
2 layers314.9 × 23.5 mm
PCRuler KiCad
JuliCai/PCRulerA PCB Ruler
- Size
- 314.9 × 23.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 65
- Pads
- 237
- Tracks, vias
- 688, 84
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 26 Sep 2025
- Updated
- 9 Oct 2025
Overview
PCRuler KiCad is an open-source printed circuit board by JuliCai, from the JuliCai/PCRuler repository on GitHub, published under the MIT licence. It is a 2-layer board of 314.9 × 23.5 mm with 46 parts on 65 nets, routed with 688 tracks and 84 vias.
It is built around the ESP32-C6-MINI-1. Its parts include 25 diodes, 9 resistors, 6 switches, 3 ICs and 2 connectors. It belongs with the ESP32 and RISC-V boards of this library.
Main components
1Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | Inolux_IN-PI554FCH | LED_SMD:LED_Inolux_IN-PI554FCH_PLCC4_5.0x5.0mm_P3.2mm | D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24 +8 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R5, R6 |
| 5 | SW_DPST | footprints:B3FS-100_OMR | SW1, SW2, SW3, SW4, SW5 |
| 2 | 33k | Resistor_SMD:R_0402_1005Metric | R8, R9 |
| 1 | 2k | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 470 | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | AZ1117CH2-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Battery_Cell | footprints:CONN_TSM-102-01-T-SH_SAI | BT1 |
| 1 | Conn_01x04_Pin | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical_SMD_Pin1Left | J3 |
| 1 | ESP32-C6-MINI-1 | RF_Module:ESP32-C6-MINI-1 | U1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | SW_SPDT | footprints:SW_JS102011SCQN | SW6 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4110 | J2 |
Similar boards
- 2 layers25 × 22.6 mm
- 2 layers27.9 × 41.7 mm
Modbus Adapter
tomasmcguinness/esp32-modbus-serial-adapter
The hardware folder contains a KiCad PCB design, designed around the ESP32-C6-MINI-1. Both the antenna and non-antenna (U1) versions will work here due to the location of the ESP32.
23 parts4 - 2 layers40 × 22.1 mm
- 2 layers50 × 45.3 mm
Tempic HW
jernej13/Tempic
Small solarpowered ESP32 based indoor/outdoor wifi weather station.
61 parts2MIT - 2 layers30.4 × 52.6 mm
MBus ESP Adapter
tomasmcguinness/matter-esp32-mbus-adapter
An ESP32-C6 adapter board for wired M-Bus (EN 13757) meters, with firmware examples that expose meter readings to a Matter fabric over Thread.
42 parts2 - 2 layers105 × 90 mm
Ws uc06
wildsystems/ws-uc06
Custom ESP32-C6 development board with power input protection, relay outputs, opto-isolated I/O, NTC sensor input, and JTAG debugging. Designed as a DIY-friendly controller base.
84 parts2 - 2 layers46.3 × 43.4 mm
Carbon
Enderman8843/Carbon
Carbon is an open-source indoor air quality sensing board designed for accurate VOC, temperature, and humidity monitoring.
38 parts1
Questions
How big is the PCRuler KiCad PCB?
It measures 314.9 × 23.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PCRuler KiCad use?
46 parts, built around the ESP32-C6-MINI-1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCRuler KiCad KiCad files?
From the JuliCai/PCRuler repository on GitHub, at the commit this page was made from: the board is PCRuler_KiCad/PCRuler_KiCad.kicad_pcb and its schematic PCRuler_KiCad/PCRuler_KiCad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCRuler KiCad design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).