2 layers55 × 80 mm
Board esp32 v2
sudomesh/disaster-radio
A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.
101 parts1.1k
2 layers162.2 × 126.5 mm
Redox rev1
juarendra/redox-enchDocumentation of product REDOX MOD with OLED and KNOB that use QMK as Firmware and Suppot VIA
- Size
- 162.2 × 126.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 101
- Nets
- 65
- Pads
- 538
- Tracks, vias
- 1,509, 214
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 29 Apr 2024
- Updated
- 10 Oct 2026
Overview
Redox rev1 is an open-source printed circuit board by juarendra, from the juarendra/redox-ench repository on GitHub. It is a 2-layer board of 162.2 × 126.5 mm with 101 parts on 65 nets, routed with 1,509 tracks and 214 vias.
Its parts include 36 switches, 7 ICs, 2 resistors and 2 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdREDOX-ENCH
REDOX-ENCH by Positron Electronic — an enhanced, independent derivative of the Redox keyboard by Mattia Dal Ben. This mod adds a rotary encoder, OLED display, Kailh hotswap sockets and RGB underglow to the split ergonomic Redox layout, with full VIA support.
Independent derivative. Not official, endorsed by, or affiliated with Mattia Dal Ben, Falbatech, or the upstream Redox project.
Legacy names (searchable for existing units): Redox-Mod, "Redox By Positron Electronics", ERGODOX_MOD_OLED_ENCH_QMK_VIA.
USB identity
- VID/PID:
0x1209:0x2013(allocated via pid.codes, owner Positron-Electronic). - Legacy units shipped with
0x4D44:0x5244(unofficial). See docs/LEGACY-SUPPORT.md to re-flash legacy firmware.
Licensing
- Hardware (KiCad, PCB, case, gerbers): MIT — see LICENSE.
- Firmware (QMK): GPL-2.0-or-later — see FIRMWARE/LICENSE.
- Third-party credits: THIRD_PARTY_NOTICES.md.
Spesification
- Arduino Pro Micro Type C as Microcontroller
- QMK Firmware
- Support VIA, all key and knob can proggrammed
- RGB Underglow
- 4x Layer
- Hotswap Switch
- 3D Case
- Redox Profile
Download VIA
Link Download VIA(CHOSEE BASED YOUR OS) : https://github.com/the-via/releases/releases VIA WEB VERSION : https://usevia.app/
Load JSON File
or you can load manually json file like a library for detect this macropad
- Connect your macropad to PC
- Open VIA
- In Tab Setting, enable "Show Design Tab"
- Open Design Tab
- Load file with name "redox.json"
- Open Configure Tab to setting your macropad
- If nothing happend , do it again from first
Preview VIA
- You can follow step on this video and the json file you can download on this link
https://github.com/juarendra/Zeapad-Pro-QMK-VIA/assets/43043633/afd7e68e-0a54-4b18-be12-b96c0f13611a
Preview Hardware
there is 2 type of case
- Floating Case with white and black color
- Covered Case with red color
>
Link Keycode QMK
- mouse : https://github.com/qmk/qmk_firmware/blob/master/docs/feature_mouse_keys.md
- keyboard : https://github.com/qmk/qmk_firmware/blob/master/docs/keycodes.md
Tutorial VIA Usage
Parts
101| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | D-Lily58-cache | SofleKeyboard-footprint:Diode_SOD123 | D_0, D_1, D_2, D_10, D_11, D_12, D_13, D_14, D_15, D_16, D_20, D_21, D_22, D_23, D_24, D_25 +20 |
| 33 | SW_PUSH-Lily58-cache | SofleKeyboard-footprint:CherryMX_Hotswap | SW0, SW1, SW2, SW10, SW11, SW12, SW14, SW15, SW16, SW20, SW21, SW22, SW23, SW24, SW25, SW26 +17 |
| 10 | Jumper_NO_Small-Device | SofleKeyboard-footprint:Jumper | JP1, JP2, JP4, JP5, JP6, JP7, JP8, JP9, JP10, JP11 |
| 6 | HOLE-Lily58-cache | SofleKeyboard-footprint:HOLE_M2_TH | U2, U3, U4, U5, U6, U7 |
| 2 | 4.7k | SofleKeyboard-footprint:R_1206_DoubleSided | R1, R2 |
| 2 | KEYSW | myparts:Mx_Alps_100-dualside | K3, K13 |
| 2 | LOGO | parent:qr-positron | G***, G*** |
| 2 | LOGO | parent:gundam | G***, G*** |
| 1 | Audio-Jack-4 | SofleKeyboard-footprint:MJ-4PP-9 | TRRS1 |
| 1 | Conn_01x03 | SofleKeyboard-footprint:LED | RGB_STRIP1 |
| 1 | Jumper_NC_Small-Device | SofleKeyboard-footprint:jumper_data | JP3 |
| 1 | OLED-Lily58-cache | SofleKeyboard-footprint:OLED_4Pin | J1 |
| 1 | ProMicro | Keebio-Part:ArduinoProMicro | U1 |
| 1 | Rotary_Encoder_Switch-Device | SofleKeyboard-footprint:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm-keebio_modified | SW3 |
| 1 | SW_PUSH | SofleKeyboard-footprint:TACT_SWITCH_TVBP06 | RST_SW1 |
| 1 | i2c_pin-Lily58-cache | SofleKeyboard-footprint:1pin_conn | J12 |
Questions
How big is the Redox rev1 PCB?
It measures 162.2 × 126.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Redox rev1 use?
101 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Redox rev1 KiCad files?
From the juarendra/redox-ench repository on GitHub, at the commit this page was made from: the board is Hardware/PCB/rev1.0/kicad_files/redox_rev1.kicad_pcb and its schematic Hardware/PCB/rev1.0/kicad_files/redox_rev1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Redox rev1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask juarendra before reusing the design.
Similar boards
- 2 layers99 × 145.5 mm
- 2 layers230.5 × 60 mm
- 2 layers224.6 × 74.2 mm
- 2 layers90 × 60 mm
Ch32v307gigabit
cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.
101 parts114 - 2 layers450 × 125 mm
A1200KB
aeberbach/A1200KB
As of right now this is revision 4. I know it could be improved very, very slightly by changing the position of key groups by less than a millimetre but I think it's complete now.
101 parts75 - 2 layers100 × 100 mm
LittleSwitchBus
profdc9/ModularTuner
A Modular Antenna Tuner for a Phased Array Antenna System
101 parts59 - 2 layers133.8 × 91.7 mm
Corney island
ceoloide/corney-island
An Ergogen-based, autogenerated version of foostan's crkbd (Corne) split keyboard
101 parts58MIT