
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

A portable USB HID cyberdeck controller built around the RP2040.
CyberDeck is an open-source printed circuit board by juanrortiz, from the juanrortiz/CyberDeck repository on GitHub. It is a 2-layer board of 58 × 45 mm with 14 parts on 22 nets, routed with 67 tracks and 0 vias.
Its parts include 4 resistors, 4 switches, 1 IC and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
A portable USB HID cyberdeck controller built around the RP2040.
Platform:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 1000 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4 |
| 4 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3, SW4 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Horizontal | J1 |
| 1 | LOGO | LOGO | G*** |
| 1 | ProMicroC | CyberDeck:RP2040 ProMicro | U1 |
The 11 most common of 14 parts.

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS


It measures 58 × 45 mm and has 2 copper layers, 1.6 mm thick.
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the juanrortiz/CyberDeck repository on GitHub, at the commit this page was made from: the board is hardware/CyberDeck/CyberDeck.kicad_pcb and its schematic hardware/CyberDeck/CyberDeck.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask juanrortiz before reusing the design.