2 layers73 × 43.8 mm
Head
jsvana/coffeetron
Arduino sketch to pour a shot of espresso in a Gaggia Classic Pro to a specific weight.
45 partsMIT
2 layers50.8 × 36.8 mm
Arduino sketch to pour a shot of espresso in a Gaggia Classic Pro to a specific weight.
- Size
- 50.8 × 36.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 14
- Pads
- 39
- Tracks, vias
- 60, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 28 Feb 2021
- Updated
- 13 Apr 2021
Overview
Pump is an open-source printed circuit board by jsvana, from the jsvana/coffeetron repository on GitHub, published under the MIT licence. It is a 2-layer board of 50.8 × 36.8 mm with 14 parts on 14 nets, routed with 60 tracks and 0 vias.
Its parts include 5 connectors, 4 resistors, 2 diodes and 1 switch.
README
README.mdcoffeetron - WIP
Arduino sketch to pour a shot of espresso in a Gaggia Classic Pro to a specific weight.
Fun side project. Probably does things wrong, and isn't really useful unless you have the same setup I do. Feel free to use as a reference if you want!
Pump control
License
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 220 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3, R4 |
| 2 | LED | LED_THT:LED_D3.0mm | D1, D2 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_4.3mm_M4_Pad | H1, H2 |
| 1 | 10000 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 680 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
| 1 | DB9_Male | Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm | J1 |
| 1 | G3MC202PDC5 | Relay_THT:Omron-G3MC202PDC5-0-0-0 | K1 |
| 1 | GroupheadThermistor | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | HeaterRelayConnect | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J5 |
| 1 | PumpConnect | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J4 |
| 1 | PumpThermocoupleAdc | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
Questions
How big is the Pump PCB?
It measures 50.8 × 36.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pump use?
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pump KiCad files?
From the jsvana/coffeetron repository on GitHub, at the commit this page was made from: the board is hardware/pump/pump.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pump design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from jsvana/coffeetron
1Similar boards
- 2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0 - 2 layers32 × 22 mm
- 2 layers34 × 45 mm
2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm
- 2 layers45.3 × 42.7 mm
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm
- 2 layers62 × 24 mm
