

EndgameV3
Endgame Keeb
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 140
- Nets
- 117
- Pads
- 672
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 26 Nov 2019
- Updated
- 3 Jan 2020
Overview
EndgameV3 is an open-source printed circuit board by jstein91, from the jstein91/Endgame repository on GitHub, published under the MIT licence. It is a 2-layer board with 140 parts on 117 nets.
Its parts include 68 diodes, 2 switches, 1 IC and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdEndgame
Endgame Keeb
Parts
140| Qty | Value | Footprint | References |
|---|---|---|---|
| 68 | D_Small | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +52 |
| 57 | MX-NoLED | MX_Only:MXOnly-1U-Hotswap | S_-1, S_,1, S_.1, S_"1, S_+1, S_0, S_1, S_2, S_3, S_4, S_5, S_6, S_7, S_8, S_9, S_10 +41 |
| 3 | MX-NoLED | MX_Only:MXOnly-1.25U-Hotswap | S_L_ALT1, S_L_CTRL1, S_L_WIN1 |
| 2 | MX-NoLED | MX_Only:MXOnly-1.75U-Hotswap | S_Cap_Lk1, S_R_Shift1 |
| 2 | MX-NoLED | MX_Only:MXOnly-1.5U-Hotswap | S_For_Slash1, S_Tab1 |
| 2 | MX-NoLED | MX_Only:MXOnly-2.25U-Hotswap | S_Ent1, S_L_Shift1 |
| 1 | Elite-C | Keyboard Footprints:Elite-C | U1 |
| 1 | MX-NoLED | MX_Only:MXOnly-2U-Hotswap | S_BkSp1 |
| 1 | MX-NoLED | MX_Only:MXOnly-6.25U-Hotswap | S_SPACE1 |
| 1 | OLED | Lily58-footprint:OLED_4Pin | J1 |
| 1 | Rotary_Encoder | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 1 | SW_PUSH | random-keyboard-parts:SKQG-1155865 | SW2 |
More from jstein91/Endgame
2- 2 layers315.9 × 132.6 mm

- 2 layers315.9 × 132.6 mm

Similar boards
- 2 layers100 × 150 mm

I2c moist sensor pannel
Miceuz/i2c-moisture-sensor
I2C based soil moisture sensor
140 parts258Apache-2.0 - 2 layers132.3 × 79.7 mm

10x breakout printout
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
140 parts253GPL-3.0 - 2 layers67.3 × 74.9 mm

- 2 layers149.9 × 55.9 mm

- 2 layers271.2 × 93.4 mm

Zerowriter Keyboard
zerowriter/zerowriter_ink
General repo for all things Zerowriter Ink
140 parts46GPL-3.0 - 2 layers173.4 × 161.4 mm

ExtraDox Right
blastrock/ExtraDox
An ergonomic custom keyboard design inspired by the ErgoDox
140 parts45 - 2 layers526 × 20 mm

Multibus mainboard
coriolisinstruments/EurorackModules
Open-source eurorack synthesizer modules and related stuff.
140 parts33 - 2 layers60 × 60 mm

HighPower Mechaduino
pointhi/HighPower-Mechaduino
Mechaduino derivative which drives up to 10A, drawn using KiCad
140 parts31
Questions
What parts does the EndgameV3 use?
140 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EndgameV3 KiCad files?
From the jstein91/Endgame repository on GitHub, at the commit this page was made from: the board is Endgame/EndgameV3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the EndgameV3 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).