Skip to the content
2 layers180.2 × 134.6 mmJanus, the printed circuit board in 3D

A reversible split ergonomic keyboard made with Ergogen and KiCAD, firmware made with ZMK.

Size
180.2 × 134.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
67
Nets
82
Pads
691
Tracks, vias
880, 12
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
13 May 2024
Updated
18 Sep 2026

Overview

Janus is an open-source printed circuit board by jsbursik, from the jsbursik/Janus-Keyboard repository on GitHub. It is a 2-layer board of 180.2 × 134.6 mm with 67 parts on 82 nets, routed with 880 tracks and 12 vias.

Its parts include 31 diodes and 31 switches. It belongs with the keyboards and input boards and the nRF52 and nRF5x boards of this library.

README

README.md

Janus Split Ergonomic Keyboard

Janus

From Wikipedia on the god Janus: "In ancient Roman religion and myth, Janus (/ˈdʒeɪnəs/ JAY-nəs; Latin: Ianvs [ˈi̯aːnʊs]) is the god of beginnings, gates, transitions, time, duality, doorways, passages, frames, and endings. He is usually depicted as having two faces. The month of January is named for Janus (Ianuarius). According to ancient Roman farmers' almanacs, Juno was mistaken as the tutelary deity of the month of January, but Juno is the tutelary deity of the month of June."

Motivation

I designed this keyboard after ordering and assembling a Piantor and not really liking the switches and keycaps. After realizing choc switches don't use the normal "+" stems I'm used to and seeing that the choc stems are a bit niche for finding keycaps - I started looking for other low-profile switch options that supported the more ubiquitous "+" stems.

Other issues involved key density, I didn't like how close together everything was. I stretched my fingers out, then closed them up and tried to get a shape that roughly followed the paths of my fingertips. I also added a few more keys than the Piantor has making this a 50 key (25 x 2) keyboard.

In comes the KS27 from Gateron. At one point I had owned a wireless keyboard that used the KS27 Linear Red switches and liked them for the most part, but these days I prefer a more tactile switch (break-over feel without the click). After finding some KS27 Browns on Amazon, I concluded they were what I was looking for. I found the hotswap sockets for the KS27 on Aliexpress and ordered a few hundred to be safe since shipping times were so long. Next I was on the hunt for blank keycaps and found that it was pretty easy to source some blank DSA profile caps from Amazon as well. I haven't used them on a full keyboard yet, but I believe it should be easier to feel out the different keys than the choc low-profile keycaps that came with the Piantor.

Workflow

I used the web version of Ergogen here to get the general shape down until I was ready for all the footprinting and stuff that would have to happen locally. Once I was happy with the general shape, I went through the tedious task of editing footprints and converting them to the .js versions that Ergogen expects in the footprints/ folder. I set up npm-watch (npm run watch) to watch out for changes to the config.yaml file to automatically run Ergogen. Once everything was placed where I wanted it, I created a kicad_project folder separate from the output folder so any Ergogen runs down the road won't effect my work in Kicad (npm run pcb-update moves new PCB changes to the kicad_project folder). I then routed everything in KiCad version 8, making sure to weave the traces for the reversible nice!nano v2 footprint I made. After everything was routed and the DRC reported no errors, I exported the gerbers and sent them off to JLCPCB. The case was also generated using Ergogen as it's easy enough to do, still working on tweaking some clearances to make everything fit nicely.

ZMK

This keyboard is meant to use the nice!nano v2 with the nice!view screen which means my firmware options were limited as this will be full wireless. The obvious choice feature-wise is ZMK. The documentation is a bit rough around the edges so I've had to do a decent amount of trial and error, as well as researching other ergo keyboard repos to see what they did. The firmware repo for this version of the Janus can be found here.

Parts

PartQuantity
nice!nano v22
sockets/pins for n!n v22 sets
nice!view2
5 pin header for nice!view, should come with it2 sets
3.7v Lithium Battery2
Gateron KS27 Hotswap Sockets50
Gateron KS27 Low profile Switches50
1N4148 Diodes (SMD or Thru-hole)100
M2 * 4mm screws14
M2 Threaded inserts 2 x 3 x 3.5mm14

Other than that, you just need the PCBs and keycaps of your choice.

Links to where I bought my parts:

Keymap Layout

This is still very much a work in progress. I've been using the keymap editor found here to try and come up with a barebones setup.

** TODO: add images

Parts

67
QtyValueFootprintReferences
31ComboDiodeD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +15
31ks27gateron-ks27S1, S2, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21, S22, S23 +15
1E73:SW_TACT_ALPS_SKQGABE010B1
1E73:SPDT_C128955T1
1JST_PH_S2B-PH-K_02x2.00mm_AngledJST1
1nice!nano_v2nice!nano_v2MCU1
1nice!viewlib:niceviewOLED1

Similar boards

  • 2 layers138.1 × 114.3 mmSilakka54, the printed circuit board in 3D

    Silakka54

    Squalius-cephalus/silakka54

    54-key column staggered split keyboard

    67 parts638MIT
  • 2 layers133.1 × 53.8 mmELEC PANEL, the printed circuit board in 3D

    ELEC PANEL

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    67 parts431
  • 2 layers160 × 100.1 mmArdumower mega shield svn, the printed circuit board in 3D

    Ardumower mega shield svn

    Ardumower/ardumower

    Develop an open source robotic lawn mower (HW+SW reference platform)

    67 parts282
  • 2 layers65 × 56 mmZpui shld wg12864b, the printed circuit board in 3D

    Zpui shld wg12864b

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    67 parts253GPL-3.0
  • 2 layers138.1 × 89.7 mmTPS42, the printed circuit board in 3D

    TPS42

    crehmann/TPS42

    An ergonomic split keyboard with TrackPoint support

    67 parts236
  • 2 layers51 × 30 mmPicociaa, the printed circuit board in 3D

    Picociaa

    ciaa/Hardware

    Hardware de la CIAA

    67 parts216
  • 2 layers93.5 × 55 mmStm32, the printed circuit board in 3D

    Stm32

    eddyem/stm32samples

    Code samples and ready projects based on bare-metal STM32

    67 parts208
  • 2 layers58.4 × 101.6 mmDual VCA #2 Main, the printed circuit board in 3D

    Dual VCA #2 Main

    mzuelch/CATs-Eurosynth

    Analog Synth Eurorack Modules

    67 parts166MIT

Questions

How big is the Janus PCB?

It measures 180.2 × 134.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Janus use?

67 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Janus KiCad files?

From the jsbursik/Janus-Keyboard repository on GitHub, at the commit this page was made from: the board is kicad_project/janus.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Janus design in my own project?

Its repository states no licence, so its author keeps all rights: ask jsbursik before reusing the design.