Skip to the content
2 layers51 × 30.8 mmAgb e06-10, the printed circuit board in 3D

This is a recreation of the AGB-E06-10 PCB used in some early Game Boy Advance titles. It is intended for use as a repair board.

Size
51 × 30.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
39
Pads
102
Tracks, vias
2,973, 163
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
20 Jun 2026
Updated
26 Jul 2026

Overview

Agb e06-10 is an open-source printed circuit board by jrharbort, from the jrharbort/AGB-E06-10-PCB repository on GitHub. It is a 2-layer board of 51 × 30.8 mm with 14 parts on 39 nets, routed with 2,973 tracks and 163 vias.

Its parts include 7 capacitors, 4 resistors and 2 ICs. It belongs with the retro computing and games boards of this library.

README

README.md

PLEASE READ EVERYTHING!!

This project is a recreation of the AGB-E06-10 PCB used in some early Nintendo Game Boy Advance titles. Its purpose is to be used as a game repair PCB and is also compatible with parts from AGB-E06-01 revision boards, but it is not compatible as a replacement for AGB-E06-20 boards.

While the E06-01/E06-10 boards were not used on many games, they were used on several early and notable titles. These include:

Castlevania - Circle of the Moon (Castlevania in EU)

F-Zero - Maximum Velocity (USA and EU)

Megaman - Battle Network (EU)

Wario Land 4 (USA and EU)

Metroid Fusion (Early revisions)

Considering no known "junk" games used this revision board, the only viable way to repair these games with a new board was to dismantle another desireable game. Not ideal. This is why I took on the task of creating this repair board. I recreated the board by hand in KiCad and used high resolution scans found on Internet Archive as a reference.

This board is fully open source, all KiCad and Gerbers are being made freely available. I do not own anything related or take credit for the design, as that is original property of Nintendo. However, if you found this project useful you can feel free to tip me on Ko-Fi.

How to get these boards

You can download either the Gerber or KiCad files from this project and upload them to be fabricated at the PCB fab of your choice. I recommend using the following settings for fabrication. IF YOU DO NOT SELECT THESE OPTIONS, YOUR BOARDS WILL NOT FIT OR WORK AS EXPECTED!

  • Thickness: 0.8mm
  • Surface Finish: ENIG/Immersion Gold
  • Castellated Holes: No
  • Copper Weight: Both 1oz or 2oz will work fine.

Materials

This is a bill of materials taken from a copy of Castlevania - Circle of the Moon. Should you lose a capacitor or resistor, you can use this as a reference to get the parts from sites like Mouser or Digikey. I recommend X7R grade components as replacements.

ReferencePartDescriptionType
U1Original ROMThe 44-pin ROM chip on the right, get from original Cartridge.TSOP-44
U2SRAM32KB/256Kbit 28-pin SRAM. Obtain from original cartridge or a junk cart.SOIC-28
U3BU9803FPower Supervisor IC. Obtain from original cartridge.SOIC-8
U4PST3425System Reset IC, get from original cartridge. Alternate part: XC6120N252NR-GSSOT-24-4
C1, C2, C3, C6CGA2B2X7R1C154K050BA0.15uF Capacitor0402
C4CL05B104KO3LNNC0.1uF capacitor0402
C5N/ANot populated0603
R1ERJ-2RKF1001X1k Ω Resistor0402
R2,R4RC0402FR-7D100KL100K Ω Resistor0402
R3RC0402FR-075KL5K Ω Resistor0402
BT1CR-1616/F2NTabbed CR1616 available online from various stores.Tabbed CR1616

Front

E06-10-Front

Back

E06-10-Back

Credits

Special thanks to AchillesPDX for assistance in verifying some traces in this board design and testing SMD values, completing this project would have been far more difficult without their help.

Changes

Rev 1.2

  • Corrected missing connection from VIAs to SRAM pins 24 & 25. Previous revisions will require a wire jump from SRAM pin 25 to ROM pin 28, and SRAM pin 24 to ROM pin 29.

Rev 1.1

  • Small change made to edge connector Pin 6. Any boards printed with Rev 1.0 should not see any functional issues.

Rev 1.0

  • This is the first revision. Everything should be working as intended if you select the correct options for fabrication. If you encounter any issues please let me know.

Parts

14
QtyValueFootprintReferences
4C_0402_1005Metric_Pad0.74x0.62mm_HandSolderCapacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolderC1, C2, C3, C4
4R_0402_1005MetricResistor_SMD:R_0402_1005MetricR1, R2, R3, R4
2C_0603_1608MetricCapacitor_SMD:C_0603_1608MetricC3, C5
1C_0402_1005MetricCapacitor_SMD:C_0402_1005MetricC6
1SOP-28_8.4x18.16mm_P1.27mmPackage_SO:SOP-28_8.4x18.16mm_P1.27mmU2
1SOP-8_3.76x4.96mm_P1.27mmPackage_SO:SOP-8_3.76x4.96mm_P1.27mmBU9803F
1TSOP-II-44_10.16x18.41mm_P0.8mmPackage_SO:TSOP-II-44_10.16x18.41mm_P0.8mmU1 GP10 MASKROM

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

How big is the Agb e06-10 PCB?

It measures 51 × 30.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Agb e06-10 use?

14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Agb e06-10 KiCad files?

From the jrharbort/AGB-E06-10-PCB repository on GitHub, at the commit this page was made from: the board is KiCad/agb-e06-10.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Agb e06-10 design in my own project?

Its repository states no licence, so its author keeps all rights: ask jrharbort before reusing the design.