Skip to the content
2 layers74.9 × 39.4 mmSandyLP Top, the printed circuit board in 3D

SandyLP Top

jpskenn/SandyLP

Low profile version of Sandy keyboard.

Size
74.9 × 39.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
36
Nets
12
Pads
69
Tracks, vias
72, 22
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
12 Sep 2024
Updated
2 Dec 2024

Overview

SandyLP Top is an open-source printed circuit board by jpskenn, from the jpskenn/SandyLP repository on GitHub, published under the MIT licence. It is a 2-layer board of 74.9 × 39.4 mm with 36 parts on 12 nets, routed with 72 tracks and 22 vias.

It belongs with the keyboards and input boards of this library.

README

README.md

SandyLP(サンディ エルピー)

SandyLP keyboard

SandyLP is a 40% keyboard with symmetrical row staggered layout and key height optimization.

Layered PCB will make height differences for each key. This covers the lack of optimization to physical key layout in two dimensions that only adjust x-y plane.


SandyLPは、スイッチの配置を立体的にして高さ方向への最適化を加えた、左右対称ロースタッガード配列の40%キーボードです。

平面上のキーレイアウトだけでは最適化しきれない部分を、キーの位置に応じてスイッチを配置する高さを変えることで補っています。

前機種のSandyを元に、ロープロファイルスイッチへの対応と、レイアウトの調整をおこなっています。

名前の由来は、立体的、つまり3Dという意味を込めたSandyに、ロープロファイル版(= Low Profile version)を意味するLPを追加しました。

特徴

左右対称のキーレイアウト

Jonesと同様の、2行目と3行目にずれのない、左右対称なシンメトリカル ロースタッガードのレイアウトです。
左右対称のキーレイアウト

一般的なロースタッガードなレイアウトとの共通性を残しつつ、左右対称で打鍵しやすくなるよう、SemiErgo Layoutに準ずるキーマッピングで使用することを念頭に設計しています。
Z行の左右端にシフトキーを用意していないので、スペースキーを「Space and Shift」として使うと便利です。

TとY、GとHの間の2キーは実際のところそれほど使用することはありませんが、ここに2キー分の間隔があいてることで左右の手を広げることになり、肩を疲れにくくします。
また、この間隔がゼロになると左右の親指が当たって動きを妨げてしまうため、あえて間隔をあけています。

このレイアウトは、市販の各種キーキャップセットのうち「Base Kit」と呼ばれる基本的なキットですべてを埋めることができます。また、104キーの英語キーキャップセットでも十分実用が可能です。 左右対称のキーレイアウト

詳しくは、Keyboard Layout Editor: SandyLPを参照してください。

キースイッチを立体的に配置

前機種のSandyと同じく、キースイッチを3段階の高さで立体的に配置しています。
平面上ではキーを配置できる範囲が限られるため、一部のキーはどうしても指が届きにくくなってしまいます。例えば、Jonesでは左右対称のレイアウトを採用することで右手小指のPやBack Space、Enterなどは打鍵しやすくなりましたが、右手人差し指のYは少し遠く感じられました。
このような箇所について、キーの配置を高くすることで打鍵しやすさを向上させています。

キースイッチの高さ(中央部分) キースイッチの高さ(横から)

キーの高さはLow(基準高=0mm), Middle(3.6mm), High(8.7mm)の3段階で、以下のように配置されます。
キーの高さ

キーボード自体が低い(薄い)

ロープロファイルのChoc V2スイッチを採用することでキーボード自体が低くなりました。
前機種のSandyからは7.2mm(※1)低くなり、パームレストを使わずとも、手首をあまり反らさないポジションで打鍵できます。

※1 ボトムプレートから1段目のスイッチ軸の天面までの高さを比較。なお、Sandyは理論上あと0.8mm低くすることが可能です。

キースイッチの高さ

RP2040を採用した構成により、多機能なファームウェアを使用可能

RP2040を採用した構成により、キーボード向けのファームウェアを格納するには十分すぎるほどのフラッシュ容量を得ることができました。
エンコーダーやオーディオ、その他各種機能の同時有効化や、多数のレイヤーを使用するなど、多機能なファームウェアを使用可能です。

Remap、Vialによるキー割り当ての変更

初期書き込み済みのファームウェアはRemapに対応しており、プログラミング等の知識がなくても、キーマッピングやロータリーエンコーダへの割り当てを、ブラウザ等を使って簡単に変更できます。

また、Vial対応のファームウェアに書き換えて使用することもできます。

オプション機能

  • ロータリーエンコーダ
  • インジケータLED
  • オーディオ

ビルドガイド

SNSタグ

#SandyLP_kbd

ギャラリー

SandyLP keyboard
w/ NuPhy nSA BOW

SandyLP keyboard
w/ Signature Plastics DSS Solarized Dark

SandyLP keyboard
w/ Keyreative KAT Space Cadet, DN0011 Switch Plate

参考事例

開発経緯

以前開発したSandyを1年半ほど使い続け、日常使いの長期ロードテストとして十分な情報を得ることができました。
その情報を元にSandyのアップデート版(Sandy DN0040)の開発をおこない、あとは基板製造の発注をするだけの段階となっていましたが、Sandyの課題のひとつとして挙げていた手首の負荷軽減、つまりキーボードを低くする変更を取り込まなかったことが様々な思いの中でほんのりと燻り続けていました。

ちょうどその頃、Choc V2スイッチのラインナップにたいへん素性の良い静音タイプが追加されました。そして、自分が普段好んで使っているMX用のキーキャップをそのスイッチと組み合わせて使えそうだという情報が得られたことから、ロープロファイルのスイッチを使用したSandyの派生版開発に踏み切りました。

使用するスイッチの変更で、派生版の開発においてそこそこの量の設計変更が見込まれることから、ついでにキーレイアウトも変更することにしました。
これまでに開発したJonesやSandyでは、頒布・販売することを念頭に想定するユーザーの最大公約数的なところへ歩み寄ったレイアウトにしていましたが、今回は自分の使用スタイルを最優先し、自分にとって不要な数字行や左右端のシフトキーなどを取り除いて、少し尖ったレイアウトに変更しました。

こうして、SandyLPが誕生することとなりました。

Parts

36
QtyValueFootprintReferences
6Dlocallib:D_SOD-123_Emphasized_Direction_LineD1, D2, D3, D4, D5, D6
6MountingHolelocallib:MountingHole_1.8-2.2mm_M2_Pad_minimalH1, H2, H3, H4, H5, H6
5Conn_01x01locallib:TestPoint_THTPad_D2.0mm_Drill1.0mmEXT_TC3, EXT_TC4, EXT_TR0, EXT_TR1, EXT_TR4
4SW_Pushlocallib:Kailh_socket_ChocV2SW_'1, SW_]1, SW_T1, SW_Y1
2SW_Pushlocallib:Kailh_socket_ChocV2_small_#2padSW_;1, SW_[1

The 23 most common of 36 parts.

More from jpskenn/SandyLP

3
  • 2 layers275.5 × 80.3 mmSandyLP Base, the printed circuit board in 3D

    SandyLP Base

    jpskenn/SandyLP

    Low profile version of Sandy keyboard.

    229 partsMIT
  • 2 layers113.1 × 58.7 mmSandyLP Middle, the printed circuit board in 3D

    SandyLP Middle

    jpskenn/SandyLP

    Low profile version of Sandy keyboard.

    65 partsMIT

Similar boards

  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    36 parts1kGPL-3.0
  • 2 layers55 × 70 mmArduino v1, the printed circuit board in 3D

    Arduino v1

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    36 parts915
  • 2 layers50.4 × 24.8 mmLEDboardRev3, the printed circuit board in 3D

    LEDboardRev3

    Architeuthis-Flux/Jumperless

    A jumperless breadboard

    36 parts914
  • 2 layers45.7 × 31.8 mmLEDx16 board, the printed circuit board in 3D

    LEDx16 board

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    36 parts803MIT
  • 2 layers32 × 24 mmEsp onelayer3, the printed circuit board in 3D

    Esp onelayer3

    cnlohr/colorchord

    Chromatic Sound to Light Conversion System

    36 parts712
  • 2 layers69 × 53.8 mmTUSS4470 shield, the printed circuit board in 3D

    TUSS4470 shield

    Neumi/open_echo

    Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.

    36 parts530
  • 2 layers99.1 × 53.3 mmABSIS Mega, the printed circuit board in 3D

    ABSIS Mega

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    36 parts431
  • 2 layers16.1 × 119 mmConnectorL, the printed circuit board in 3D

    ConnectorL

    thpoll83/PolyKybd

    PolyKybd

    36 parts411CERN-OHL-W-2.0

Questions

How big is the SandyLP Top PCB?

It measures 74.9 × 39.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SandyLP Top use?

36 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SandyLP Top KiCad files?

From the jpskenn/SandyLP repository on GitHub, at the commit this page was made from: the board is PCB/SandyLP_Top/SandyLP_Top.kicad_pcb and its schematic PCB/SandyLP_Base/SandyLP_Base.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SandyLP Top design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).