
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

This is a DIY SuzyQ cable which is a cable that is used for Closed Case Debugging on Chromebooks. This board is completely passive hence why there isnt a microcontroller.
SuzyQ is an open-source printed circuit board by jphwba, from the jphwba/SuzyQ-DIY repository on GitHub. It is a 2-layer board of 34.9 × 23 mm with 7 parts on 20 nets, routed with 125 tracks and 19 vias.
Its parts include 3 connectors and 2 resistors.
This is a DIY SuzyQ cable which is a cable that is used for Closed Case Debugging on Chromebooks. This board is completely passive hence why there isnt a microcontroller. I made this by looking at a few reddit threads on the schematics on this as well as the official schematic. One side has a USB C pad on it to wire up a usbc male header which plugs directly into the chromebook while the other end features two micro usb ports with the bottom being tty0 and the top being tty1. I chose to build this because first of all it helps be deepen my skills on kicad but also because I have an old chromebook (that is unneccesarily powerful) which I have wanted to transform into a windows laptop or a home server. To be able to do this, I needed a SuzyQ cable however they cost about $40 so instead I wanted to design my own. This is a pretty basic pcb but it helps be learn some of the basics of how USB's work. Then later I can use these skills for other projects on Hackclub's YSWS programs.



All kicad project files are avaliable in the kicad folder.
| Item | Qty | Price Per Unit (AUD) | Site |
|---|---|---|---|
| USB Micro B PC Mount Socket | 2 | $2.95 | https://www.jaycar.com.au/usb-micro-b-pc-mount-socket/p/PS0922 |
| USB 2.0 Type-C Connector Breakout Board (usb07b) | 1 | $6.65 | https://core-electronics.com.au/usb-2-0-type-c-connector-breakout-board-usb07b.html |
| 22k Ohm 1 Watt Carbon Film Resistors - Pack of 2 | 1 | $0.65 | https://www.jaycar.com.au/22k-ohm-1-watt-carbon-film-resistors-pack-of-2/p/RR2806 |
| 56k Ohm 1 Watt Carbon Film Resistors - Pack of 2 | 1 | $0.65 | https://www.jaycar.com.au/56k-ohm-1-watt-carbon-film-resistors-pack-of-2/p/RR2816 |
| Total | $13.85 |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP1, JP2 |
| 2 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex_47346-0001 | J2, J3 |
| 1 | 22.1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 56.2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | USB_C_Plug | Connector_USB:USB_C_Plug_Molex_105444 | P1 |

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.



AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power


jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

It measures 34.9 × 23 mm and has 2 copper layers, 1.6 mm thick.
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jphwba/SuzyQ-DIY repository on GitHub, at the commit this page was made from: the board is KiCad/SuzyQ.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jphwba before reusing the design.