Skip to the content
2 layers102 × 102 mmAvid num pico, the printed circuit board in 3D

A super simple num/macro pad with a custom PCB based on the Raspberry Pi Pico, and using KMK firmware for easy programming.

Size
102 × 102 mm
Copper layers
2
Thickness
1.6 mm
Parts
53
Nets
60
Pads
210
Tracks, vias
140, 2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
6 Jun 2023
Updated
8 Jun 2023

Overview

Avid num pico is an open-source printed circuit board by jpederson, from the jpederson/avid-num-pico repository on GitHub. It is a 2-layer board of 102 × 102 mm with 53 parts on 60 nets, routed with 140 tracks and 2 vias.

Its parts include 22 diodes, 3 switches and 2 connectors. It belongs with the RP2040 boards of this library.

Parts

53
QtyValueFootprintReferences
22D_SmallDiode_SMD:D_SOD-123FD1, D2, D3, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22 +6
22MX_SW_soldermarbastlib-mx:SW_MX_1uMX1, MX2, MX3, MX10, MX11, MX12, MX13, MX14, MX15, MX16, MX17, MX18, MX19, MX20, MX21, MX22 +6
4MountingHoleMountingHole:MountingHole_2.7mm_M2.5H1, H2, H3, H4
3MX_stabmarbastlib-mx:STAB_MX_2uS1, S2, S3
11-20Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_VerticalJ2
121-40Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_VerticalJ1

Similar boards

  • 2 layers217.1 × 393.8 mmSweepv2, the printed circuit board in 3D

    Sweepv2

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    53 parts2.1k
  • 2 layers121.9 × 81.3 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    53 parts1kGPL-3.0
  • 2 layers48 × 48 mmUSB, the printed circuit board in 3D

    USB

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    53 parts915
  • 2 layers103.7 × 74.1 mmPicoGUS, the printed circuit board in 3D

    PicoGUS

    polpo/picogus

    Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support

    53 parts805
  • 2 layers60.5 × 76.8 mmHeadphones prototype pcb, the printed circuit board in 3D

    Headphones prototype pcb

    strangeparts/niubi-headphones

    Flexible circuit board design for adding a headphone jack to an iPhone 7

    53 parts493MIT
  • 2 layers59.1 × 26.1 mmPSRAMmod, the printed circuit board in 3D

    PSRAMmod

    Architeuthis-Flux/JumperlessV5

    The next generation jumperless breadboard

    53 parts332
  • 2 layers49 × 49 mmOpen source BMS, the printed circuit board in 3D

    Open source BMS

    Teslafly/Dead-OpenBMS-dead

    A scalable, open source battery management system

    53 parts248
  • 2 layers39 × 40 mmMdb bridge esp32s3, the printed circuit board in 3D

    Mdb bridge esp32s3

    nodestark/mdb-esp32-cashless

    ESP32-based MDB cashless device for vending machines, supporting EVA DTS DEX/DDCMP telemetry and payments over the MDB protocol via Bluetooth and MQTT

    53 parts190MIT

Questions

How big is the Avid num pico PCB?

It measures 102 × 102 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Avid num pico use?

53 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Avid num pico KiCad files?

From the jpederson/avid-num-pico repository on GitHub, at the commit this page was made from: the board is pcb/avid-num-pico.kicad_pcb and its schematic pcb/avid-num-pico.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Avid num pico design in my own project?

Its repository states no licence, so its author keeps all rights: ask jpederson before reusing the design.