
Lofence
kiu/lofence
LoFence is a LoRaWAN capable IoT electric fence monitoring system running on the The Things Network.

A Kicad project for an Atmega328PB-AU minimal board. I got a few of these microcontrollers and I read that they have some interesting features that Atmega328Ps don't have, such as additional USART, SPI, Timers, etc.
Atmega328PB minimal board is an open-source printed circuit board by jovan3, from the jovan3/atmega328PB_minimal_board repository on GitHub. It is a 2-layer board of 54 × 33.7 mm with 14 parts on 32 nets, routed with 448 tracks and 49 vias.
It is built around the ATMEGA328PB-AU. Its parts include 5 connectors, 3 capacitors, 2 resistors, 1 IC and 1 diode. It belongs with the microcontroller boards boards and the AVR (ATmega, ATtiny) boards of this library.
A Kicad project for an Atmega328PB-AU minimal board. I got a few of these microcontrollers and I read that they have some interesting features that Atmega328Ps don't have, such as additional USART, SPI, Timers, etc.
There's a 10-pin AVR ICSP header. I used USBASP with Arduino to burn an Arduino bootloader and flash a sketch. I used this github project to get the Atmega328PB board definition files working and used the "Atmega328PB Internal Clock" with the 8MHz option to flash the bootloader. The microcontroller board has a crystal oscillator. If it's populated with a 16MHz crystal, for example, the microcontroller can be programmed to use that. You can use any of the six exposed microcontroller pins (23-26, 30, 31) to connect an LED for example, to test with a Blink Hello World program.
Here's a 3D rendering of the board viewed from above, so you can see how it looks like without importing the project in Kicad:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3, C4 |
| 2 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J5 |
| 2 | Conn_01x16_Male | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | J3, J4 |
| 1 | 100 Ohm | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 16MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | ATmega328PB-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J2 |
| 1 | LED_Small | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | Reset | Button_Switch_THT:SW_PUSH_6mm_H5mm | RST |

kiu/lofence
LoFence is a LoRaWAN capable IoT electric fence monitoring system running on the The Things Network.

silvervest/c64pico
This is a tiny emulated C64 running on a Raspberry Pi Pico! Full details of the build can be found at https://www.youtube.com/watch?v=hgLhGpbC6E4

c0pperdragon/SIO2SD
An Arduino-based floppy drive emulator for the atari 8 bit computers.

valerionew/very-good-uc-doggos
A special graduation present for a special friend. Six microcontrollers in one devboard

ageppert/Brushless-Motor-Biz-Card
A brushless motor and driver built in to a business card form-factor for learning and experimenting!

orangeglo/PS2PSP
Board to connect a PS2 controller to a PSP 2000 (PSP Consolizer)

latonita/jeep-canbus
Projects around CAN BUS in Chrysler Jeep - VES enabler, other small features

It measures 54 × 33.7 mm and has 2 copper layers, 1.6 mm thick.
14 parts, built around the ATMEGA328PB-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jovan3/atmega328PB_minimal_board repository on GitHub, at the commit this page was made from: the board is atmega328pb_minimal_board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jovan3 before reusing the design.