
Type f
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Code to run the SchoolDesk MIDI controller
SchoolDesk is an open-source printed circuit board by joshnishikawa, from the joshnishikawa/SchoolDesk repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 99.7 × 35.6 mm with 25 parts on 28 nets, routed with 157 tracks and 2 vias.
Its parts include 13 connectors, 8 resistors, 1 diode and 1 switch.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10k | Resistors_ThroughHole:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1, R4, R11 |
| 3 | 1x1 | Pin_Headers:Pin_Header_Straight_1x01_Pitch2.00mm | J10, J11, J12 |
| 3 | 1x2 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.00mm | J1, J3, J9 |
| 3 | 330 | R_SMD_3D:R_0805_2012Metric | R2, R3, R7 |
| 3 | AudioJack4 | Conn_Aud_3D:Jack_3.5mm_PJ320D_Horizontal | J6, J7, J13 |
| 2 | 220 | R_SMD_3D:R_0805_2012Metric | R5, R6 |
| 2 | Conn_01x14_Female | S_2.54_3D:PinSocket_1x14_P2.54mm_Vertical | J4, J5 |
| 1 | 1x02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.00mm | J8 |
| 1 | DIN-5_180degree | Connect:SDS-50J | J2 |
| 1 | LED_RCBG | LED_SMD_3D:LED_RGB_1210 | D1 |
| 1 | Rotary_Encoder_Switch | digikey-footprints:Rotary_Encoder_Switched_PEC11R | SW1 |
The 23 most common of 25 parts.

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

xyphro/UsbGpib
Versatile, cheap and portable USB to GPIB converter (USBTMC class based)


jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

It measures 99.7 × 35.6 mm and has 2 copper layers, 1.6 mm thick.
25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the joshnishikawa/SchoolDesk repository on GitHub, at the commit this page was made from: the board is KiCad/SchoolDesk.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).