

Stm32f103-feather
STM32F103 in an Adafruit Form Factor
- Size
- 51.8 × 22.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 62
- Pads
- 203
- Tracks, vias
- 587, 115
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Nov 2019
- Updated
- 24 May 2020
Overview
Stm32f103-feather is an open-source printed circuit board by joshajohnson, from the joshajohnson/stm32f103-feather repository on GitHub. It is a 2-layer board of 51.8 × 22.9 mm with 41 parts on 62 nets, routed with 587 tracks and 115 vias.
It is built around the AP2112K-3.3, DMP2045U and MBR120. Its parts include 13 resistors, 10 capacitors, 4 diodes, 4 connectors and 3 ICs. It belongs with the microcontroller boards boards and the STM32 boards of this library.
Main components
3README
README.mdSTM32F103 Feather

STM32F103 in an Adafruit Feather form factor.
- STM32F103 MCU
- USB type C connector
- SWD Header
- RGB LED
- Designed to work with my RF Signal Generator
TODO
Hardware
- Optimise pin mapping for V0.2 (SPI1 CS incorrecly positioned, may be other issues)
Firmware
- Improved demo code
- PWM control drivers for RGB LED
- USB Bootloader
- Add to Arduino framework with STM32Duino
- Add Black Magic Probe support?
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0603_1608Metric | C4, C5, C6, C7, C9 |
| 4 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R9, R12, R13 |
| 3 | 100K | Resistor_SMD:R_0603_1608Metric | R4, R7, R10 |
| 3 | 10u | Capacitor_SMD:C_0603_1608Metric | C3, C8, C10 |
| 2 | 12P | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 22R | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | 5K1 | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | SW_Push | josh-buttons-switches:BT_PTS815 | SW1, SW2 |
| 1 | 1.27_SWD | josh-connectors:SAMTEC_FTSH-105-01-L-DV-R-TR | J1 |
| 1 | 1K | Resistor_SMD:R_Array_Convex_4x0402 | RN1 |
| 1 | 1K5 | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 2K2 | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 8MHz | josh-oscillators:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | DMP2045U | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Feather | josh-connectors:featherwing-typeC | J4 |
| 1 | JST_PH | josh-connectors:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J3 |
| 1 | LED_RGBA | josh-led:LED_0606_E6C0606RGBC3UDA | D4 |
| 1 | LOGO | josh-logos:OSHW_Logo_3.6x3.6_F.Mask | G*** |
| 1 | MBR120 | josh-passives-smt:D_SOD-123FL | D1 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | ORG | LED_SMD:LED_0603_1608Metric_Castellated | D2 |
| 1 | RED | LED_SMD:LED_0603_1608Metric_Castellated | D3 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | USB_C_Receptacle_USB2.0 | josh-connectors:USB_C_Receptacle_GT-USB-7010 | J2 |
The 40 most common of 41 parts.
Similar boards
- 4 layers50 × 22.9 mm

- 2 layers45 × 60 mm

- 4 layers60 × 60 mm

- 2 layers47.7 × 80.7 mm

Christmas tree ear ring
arvindsa/xmas-tree-earring
A pair of wireless, synchronized LED earrings with nRF52 MCUs running deterministic animation patterns.
65 parts - 4 layers18 × 51.3 mm

ATesp32
SreeniEadara/ATesp32
esp32s3 board that has an identical footprint and similar pinout to the ATmega32.
51 parts - 4 layers59 × 33.8 mm

- 4 layers49.2 × 26.3 mm

Tvplug2
pstiasny/tv-doom
The detailed description of the build is described in this blog post:
92 parts1GPL-2.0 - 4 layers60 × 77 mm

Questions
How big is the Stm32f103-feather PCB?
It measures 51.8 × 22.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Stm32f103-feather use?
41 parts, built around the AP2112K-3.3, DMP2045U and MBR120. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Stm32f103-feather KiCad files?
From the joshajohnson/stm32f103-feather repository on GitHub, at the commit this page was made from: the board is hardware/0.2/stm32f103-feather.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Stm32f103-feather design in my own project?
Its repository states no licence, so its author keeps all rights: ask joshajohnson before reusing the design.