Skip to the content
2 layers30 × 30 mmEcal, the printed circuit board in 3D

25MHz to 1.25GHz Vector Network Analyser

Size
30 × 30 mm
Copper layers
2
Thickness
1.6 mm
Parts
20
Nets
16
Pads
112
Tracks, vias
68, 111
Pours
4
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
24 Dec 2018
Updated
30 Dec 2019

Overview

Ecal is an open-source printed circuit board by joshajohnson, from the joshajohnson/vna repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 30 × 30 mm with 20 parts on 16 nets, routed with 68 tracks and 111 vias.

Its parts include 5 capacitors, 3 connectors, 2 resistors, 2 ICs and 1 diode.

README

README.md

VNA

Low cost 25MHz to 1.25GHz Vector Network Analyser.

Design is feature complete, but not suitable for use.
Due to hardware issues the error is unacceptably large, and as such I can not recommend assembling one of these.

Summary of Project

Link to Thesis

Parts

20
QtyValueFootprintReferences
4M3 ViaMountingHole:MountingHole_3.2mm_M3_Pad_ViaH1, H2, H3, H4
21nCapacitor_SMD:C_0402_1005MetricC3, C5
21uCapacitor_SMD:C_0603_1608MetricC1, C2
2SMAVNA_Footprints:SMA_EDGE_MOUNTJ2, J3
1100mA PolyfuseVNA_Footprints:Fuse_0805_2012MetricF1
110nCapacitor_SMD:C_0402_1005MetricC4
11KResistor_SMD:R_0603_1608MetricR2
149R9Resistor_SMD:R_0402_1005MetricR3
1LEDLED_SMD:LED_0603_1608MetricD2
1LP5912Package_DFN_QFN:DFN-6-1EP_2x2mm_P0.65mm_EP1x1.6mmU1
1PE42440VNA_Footprints:QFN-16-1EP_3x3mm_P0.5mm_EP2.7x2.7mm_ThermalViasU2
1USB_B_MicroVNA_Footprints:MicroUSB_AliexpressJ1

The 18 most common of 20 parts.

More from joshajohnson/vna

8
  • 4 layers100 × 66 mmVNA, the printed circuit board in 3D

    VNA

    joshajohnson/vna

    25MHz to 1.25GHz Vector Network Analyser

    254 parts25GPL-3.0
  • 4 layers48 × 48 mmMAX2870 Dev Rev 0, the printed circuit board in 3D

    MAX2870 Dev Rev 0

    joshajohnson/vna

    25MHz to 1.25GHz Vector Network Analyser

    52 parts25GPL-3.0
  • 4 layers48 × 48 mmGain Block Dev Rev 0, the printed circuit board in 3D

    Gain Block Dev Rev 0

    joshajohnson/vna

    25MHz to 1.25GHz Vector Network Analyser

    49 parts25GPL-3.0
  • 2 layers45 × 100 mmMeasurementCard, the printed circuit board in 3D

    MeasurementCard

    joshajohnson/vna

    25MHz to 1.25GHz Vector Network Analyser

    34 parts25GPL-3.0
  • 4 layers48 × 48 mmFilter Bank Dev Rev 0, the printed circuit board in 3D

    Filter Bank Dev Rev 0

    joshajohnson/vna

    25MHz to 1.25GHz Vector Network Analyser

    28 parts25GPL-3.0
  • 4 layers48 × 48 mmTRF37A75 Dev Rev 0, the printed circuit board in 3D

    TRF37A75 Dev Rev 0

    joshajohnson/vna

    25MHz to 1.25GHz Vector Network Analyser

    23 parts25GPL-3.0
  • 4 layers48 × 48 mmADC-15-4 Dev Rev 1, the printed circuit board in 3D

    ADC-15-4 Dev Rev 1

    joshajohnson/vna

    25MHz to 1.25GHz Vector Network Analyser

    16 parts25GPL-3.0
  • 2 layers50 × 44.3 mmADC-15-4 Dev Rev 0, the printed circuit board in 3D

    ADC-15-4 Dev Rev 0

    joshajohnson/vna

    25MHz to 1.25GHz Vector Network Analyser

    9 parts25GPL-3.0

Similar boards

  • 2 layers66.9 × 74.5 mmDeskHop Rev1, the printed circuit board in 3D

    DeskHop Rev1

    hrvach/deskhop

    Fast Desktop Switching Device

    20 parts7.9kGPL-3.0
  • 2 layers86.4 × 64.8 mmSlot machine, the printed circuit board in 3D

    Slot machine

    google/google-ctf

    Google CTF

    20 parts5.1kApache-2.0
  • 2 layers36.2 × 26.8 mmEsp32 minimal, the printed circuit board in 3D

    Esp32 minimal

    atopile/atopile

    Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️

    20 parts4kMIT
  • 2 layers108.1 × 393.8 mmSweep compact ble, the printed circuit board in 3D

    Sweep compact ble

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    20 parts2.1k
  • 2 layers26 × 15.9 mmTPS54340 Buck Regulator, the printed circuit board in 3D

    TPS54340 Buck Regulator

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    20 parts1.2k
  • 2 layers67.6 × 30.5 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    20 parts1kGPL-3.0
  • 2 layers44.3 × 28.7 mmLin bus adapter esp32, the printed circuit board in 3D

    Lin bus adapter esp32

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    20 parts915
  • 2 layers89.5 × 61.6 mmFreeDeck TH 2020-02, the printed circuit board in 3D

    FreeDeck TH 2020-02

    FreeYourStream/freedeck-hardware

    all the stuff you need to build your own FreeDeck

    20 parts772

Questions

How big is the Ecal PCB?

It measures 30 × 30 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ecal use?

20 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ecal KiCad files?

From the joshajohnson/vna repository on GitHub, at the commit this page was made from: the board is Hardware/Ecal/Ecal.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ecal design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).