Skip to the content
2 layers143 × 233.8 mmJianovka, the printed circuit board in 3D

Zbrojovka hardware-based keyboard with Jian-based layout

Size
143 × 233.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
53
Nets
95
Pads
259
Tracks, vias
574, 0
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
19 Mar 2020
Updated
19 Mar 2020

Overview

Jianovka is an open-source printed circuit board by joric, from the joric/jianovka repository on GitHub. It is a 2-layer board of 143 × 233.8 mm with 53 parts on 95 nets, routed with 574 tracks and 0 vias.

Its parts include 42 ICs and 6 resistors. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.

README

hardware/README.md

Jianovka

Jianovka is a chorded keyboard that looks similar to Jian or Corne keyboard, but uses chords instead of layers. Columnar stagger and thumb cluster are copied from Jian keyboard, but far-far-away pinky key removed. So Jianovka looks more like Jian, but has 42 keys like Corne.

This keyboard is designed to be made with Hall effect switches and keys from vintage Zbrojovka 262.3 keyboard, Teensy 2.0 microcontroller and QMK firmware.

Keyboard Maintainer: Dmitry Nikolaev

Files in this repository, except those made not by me, are in public domain.

Parts

53
QtyValueFootprintReferences
42MH3SS2mh3ss2:MH3SS2U1, U2, U10, U11, U12, U13, U14, U15, U16, U17, U18, U19, U20, U21, U22, U23 +26
6RResistor_SMD:R_1206_3216MetricR1, R2, R3, R4, R5, R6
4Conn_02x06_Top_BottomConnector_IDC:IDC-Header_2x06_P2.54mm_VerticalJL1, JL2, JR1, JR2
1Teensy2.0_(C)teensy:Teensy2.0Teensy_2.0

Similar boards

  • 2 layers217.1 × 393.8 mmSweepv2, the printed circuit board in 3D

    Sweepv2

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    53 parts2.1k
  • 2 layers121.9 × 81.3 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    53 parts1kGPL-3.0
  • 2 layers48 × 48 mmUSB, the printed circuit board in 3D

    USB

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    53 parts915
  • 2 layers103.7 × 74.1 mmPicoGUS, the printed circuit board in 3D

    PicoGUS

    polpo/picogus

    Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support

    53 parts805
  • 2 layers60.5 × 76.8 mmHeadphones prototype pcb, the printed circuit board in 3D

    Headphones prototype pcb

    strangeparts/niubi-headphones

    Flexible circuit board design for adding a headphone jack to an iPhone 7

    53 parts493MIT
  • 2 layers59.1 × 26.1 mmPSRAMmod, the printed circuit board in 3D

    PSRAMmod

    Architeuthis-Flux/JumperlessV5

    The next generation jumperless breadboard

    53 parts332
  • 2 layers49 × 49 mmOpen source BMS, the printed circuit board in 3D

    Open source BMS

    Teslafly/Dead-OpenBMS-dead

    A scalable, open source battery management system

    53 parts248
  • 2 layers39 × 40 mmMdb bridge esp32s3, the printed circuit board in 3D

    Mdb bridge esp32s3

    nodestark/mdb-esp32-cashless

    ESP32-based MDB cashless device for vending machines, supporting EVA DTS DEX/DDCMP telemetry and payments over the MDB protocol via Bluetooth and MQTT

    53 parts190MIT

Questions

How big is the Jianovka PCB?

It measures 143 × 233.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Jianovka use?

53 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Jianovka KiCad files?

From the joric/jianovka repository on GitHub, at the commit this page was made from: the board is hardware/jianovka.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Jianovka design in my own project?

Its repository states no licence, so its author keeps all rights: ask joric before reusing the design.