
CubeSat Thesis MCU V2
famesy/CuteSat
This is an open-source CubeSat printed circuit board (PCB) project that includes both hardware and software components.

A complete training environmnet and agent to train a robot to move around a building using Q-Learning
TFG PCB is an open-source printed circuit board by jordi2224, from the jordi2224/DQNavigator repository on GitHub. It is a 2-layer board with 101 parts on 83 nets, routed with 1,047 tracks and 116 vias.
It is built around the CD74HC4067M, FDD6685 and FDD8896-F085, with the SDT5100LP5-13D and IRF540N among its other parts. Its parts include 43 resistors, 22 connectors, 16 transistors, 10 capacitors and 5 ICs.
"# DQNavigator"
| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R14, R15, R18, R19, R21, R23, R28, R29, R31, R33, R36, R37, R38 +9 |
| 9 | Conn_01x02_Male | Connector_Wire:SolderWirePad_1x02_P7.62mm_Drill2mm | J1, J4, J6, J7, J9, J10, J11, J16, J17 |
| 8 | 4k7 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R16, R17, R24, R25, R26, R27, R34, R35 |
| 6 | FDD6685 | Package_TO_SOT_SMD:TO-252-3_TabPin2 | Q2, Q3, Q6, Q9, Q12, Q15 |
| 4 | 20k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R20, R22, R30, R32 |
| 4 | 2N2219 | Package_TO_SOT_THT:TO-39-3 | Q5, Q10, Q11, Q16 |
| 4 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J19, J21, J22, J24 |
| 4 | Conn_01x04_Male | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J2, J3, J5, J8 |
| 4 | FDD8896-F085 | Package_TO_SOT_SMD:TO-252-3_TabPin2 | Q7, Q8, Q13, Q14 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R6, R7 |
| 2 | 10u | Capacitor_SMD:C_2512_6332Metric_Pad1.52x3.35mm_HandSolder | C1, C2 |
| 2 | 10u | Diode_SMD:D_2512_6332Metric_Pad1.52x3.35mm_HandSolder | C9, C10 |
| 2 | 15u | Inductor_SMD:L_10.4x10.4_H4.8 | L1, L2 |
| 2 | 470u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C5, C6 |
| 2 | 470u | Capacitor_SMD:CP_Elec_10x12.5 | C3, C4 |
| 2 | 470u | Capacitor_SMD:CP_Elec_10x12.6 | C7, C8 |
| 2 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J13, J15 |
| 2 | Conn_01x05_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J20, J23 |
| 2 | SDT5100LP5-13 | Diode_SMD:D_PowerDI-5 | D1, D2 |
| 2 | TD7590_2 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U2, U3 |
| 1 | 22k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R13 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q4 |
| 1 | 300k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R10 |
| 1 | 47k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R12 |
| 1 | 68k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R11 |
| 1 | CD74HC4067M | Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm | U4 |
| 1 | IRF540N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | L78L05_SOT89 | Package_TO_SOT_SMD:SOT-89-3 | U1 |
| 1 | LOGO | logo:logo | G*** |
| 1 | MCP3021A0T-E_OT | Package_TO_SOT_SMD:SOT-23-5 | IC1 |
| 1 | Raspberry_Pi_2_3 | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J18 |

famesy/CuteSat
This is an open-source CubeSat printed circuit board (PCB) project that includes both hardware and software components.




silveirago/MidiMood
This repository contains the code for a custom MIDI controller project called MidiMood, built using an ATmega32U4 microcontroller (or similar).

16n-faderbank/16nx
16nx is a controller for musical instruments. Sixteen faders,MIDI over USB and jack, CV out, and I2C out. Based around RP2040.

brenonsantos/OpenPDM
OpenPDM is an open-source programable Power Distribution Module for your car

101 parts, built around the CD74HC4067M, FDD6685, FDD8896-F085 and SDT5100LP5-13D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jordi2224/DQNavigator repository on GitHub, at the commit this page was made from: the board is hardware/PCB/TFG_PCB/TFG_PCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jordi2224 before reusing the design.