2 layers70 × 50 mm
Esp32 sensor board
Polymath-AS/kicad_automation
Dockerized kicad and mcp tools with autorouter capability and skillset for using the tools.
34 partsMIT
2 layers101 × 61.4 mm
Weather
jordan336/weatherCortex-M0 Embedded Weather Station with Soil Moisture Monitoring
- Size
- 101 × 61.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 74
- Nets
- 85
- Pads
- 257
- Tracks, vias
- 446, 53
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 14 Aug 2017
- Updated
- 21 Aug 2017
Overview
Weather is an open-source printed circuit board by jordan336, from the jordan336/weather repository on GitHub. It is a 2-layer board of 101 × 61.4 mm with 74 parts on 85 nets, routed with 446 tracks and 53 vias.
It is built around the AP2112K-3.3, TMP 10212 and FDS8960C-TP. Its parts include 25 capacitors, 18 resistors, 7 connectors, 5 ICs and 5 diodes. It belongs with the home automation and IoT boards and the STM32 boards of this library.
Main components
3
AP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorised
TMP 10212
85-264VAC to ±12VDC (±380mA) 10W Dual Outputs Power SupplyTRACO POWERUncategorised
FDS8960C-TP
SOP-8-55℃~+150℃ 18nC@10V、19nC@10V 2.5V、2.5V 20mΩ@10V、36mΩ@10V 40V、40V 7.2A、7.5A 700pF、710pF 80pF、85pF 92pF、94pF N-Channel + P-Channel SOP-8 MOSFETs ROHSTECH PUBLICMOSFETs
README
README.mdWeather Station
Jordan Ebel
STM32F0 ARM Cortex M0 based weather station with temperature, UV, light, and soil moisture monitoring. The board is powered with 5V from the USB connector. The board includes a standard RJ-45 Ethernet jack with built-in magnetics. I2C, SWD, and some GPIO pins are broken out to connectors for debug and test.
Parts
74| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 0.1u | Capacitors_SMD:C_1206_HandSoldering | C5, C9, C10, C14, C18, C20, C22, C23, C25 |
| 7 | TEST | Measurement_Points:Measurement_Point_Round-TH_Big | TP1, TP2, TP3, TP4, TP5, TP6, TP8 |
| 5 | 100n | Capacitors_SMD:C_1206_HandSoldering | C2, C3, C6, C7, C12 |
| 5 | 470 | Resistors_SMD:R_1206_HandSoldering | R12, R13, R14, R15, R16 |
| 5 | LED_ALT | LEDs:LED_1206_HandSoldering | D1, D2, D3, D4, D5 |
| 4 | 49.9 | Resistors_SMD:R_1206_HandSoldering | R8, R9, R10, R11 |
| 3 | 1pin | Connectors:1pin | , , |
| 3 | 1u | Capacitors_SMD:C_1206_HandSoldering | C1, C17, C19 |
| 3 | 4.7u | Capacitors_SMD:C_1206_HandSoldering | C4, C8, C13 |
| 3 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J3, J4, J6 |
| 2 | 10p | Capacitors_SMD:C_1206_HandSoldering | C11, C15 |
| 2 | 180 | Resistors_SMD:R_1206_HandSoldering | R6, R7 |
| 2 | 1k | Resistors_SMD:R_1206_HandSoldering | R17, R18 |
| 2 | 5.1k | Resistors_SMD:R_1206_HandSoldering | R3, R4 |
| 2 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J5, J7 |
| 1 | 0.01u | Capacitors_SMD:C_1206_HandSoldering | C24 |
| 1 | 100k | Resistors_SMD:R_1206_HandSoldering | R1 |
| 1 | 10k | Resistors_SMD:R_1206_HandSoldering | R2 |
| 1 | 10n | Capacitors_SMD:C_1206_HandSoldering | C16 |
| 1 | 10u | Capacitors_SMD:C_1206_HandSoldering | C21 |
| 1 | 2.32k | Resistors_SMD:R_1206_HandSoldering | R5 |
| 1 | AP2112K-3.3 | TO_SOT_Packages_SMD:SOT-23-5_HandSoldering | U1 |
| 1 | Crystal | Crystals:Crystal_SMD_HC49-SD_HandSoldering | Y1 |
| 1 | ENC28J60-C/SS | Housings_SSOP:SSOP-28_5.3x10.2mm_Pitch0.65mm | U2 |
| 1 | FDS8960C | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | Q1 |
| 1 | Ferrite_Bead | Inductors_SMD:L_Vishay_IHSM-3825 | L1 |
| 1 | RJ45-TRANSFO | Connectors:RJ45_TRANSFO | J1 |
| 1 | STM32F042C6Tx | Housings_QFP:LQFP-48_7x7mm_Pitch0.5mm | U3 |
| 1 | SW_Push | Buttons_Switches_THT:SW_TH_Tactile_Omron_B3F-10xx | SW1 |
| 1 | Si1145 | weather:10-QFN | U5 |
| 1 | USB_OTG | Connectors:USB_Micro-B | J2 |
| 1 | tmp102 | weather:SOT-563 | U4 |
Similar boards
- 4 layers84 × 41 mm
WormControl Relay15x5t15-ControlBoard
makerspacelt/WormControl-Relay15x5t15-ControlBoard
Dev NOTE: before commit, run ./kibot.sh to regenerate documentation, bom, gerbers and other assets.
93 partsCERN-OHL-S-2.0 - 2 layers85.5 × 86 mm
WormControl Relay15x5t15-PowerBoard
makerspacelt/WormControl-Relay15x5t15-PowerBoard
Dev NOTE: before commit, run ./kibot.sh to regenerate documentation, bom, gerbers and other assets.
53 partsCERN-OHL-S-2.0 - 2 layers6.4 × 14 mm
Micro T Probe
nthrd/MicroTProbe
A breakout for the TMP102 from Texas Instruments small enough to fit inside a ¼ inch copper tube.
11 partsCC-BY-SA-4.0 - 2 layers90 × 55 mm
S3.1-before repack
puji4810/coffe-scale
USB-C J5 ──► U8 ESD ──► R19/R20 22R ──► U4 IO19/IO20 (native USB-Serial/JTAG) │VBUS ├─► U5 TP4057 充电 ──► J6 1S Li-ion └─► D1/Q1 负载切换 ──► VSYS ──► U6 XC6220 3V3 1A ──► VCC3V3 ──► U4/外设 └──► U7 HT7533 ──► VDDADC ──► U1/U3…
96 partsApache-2.0 - 2 layers65 × 56 mm
- 2 layers15 × 25 mm
- 2 layers85 × 84 mm
TTC LoRa
PARTH-KAKIRDE/CUBESAT
Radio (communications) module for the 2U CubeSat, LoRa version, Rev A.
81 partsMIT
Questions
How big is the Weather PCB?
It measures 101 × 61.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Weather use?
74 parts, built around the AP2112K-3.3, TMP 10212 and FDS8960C-TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Weather KiCad files?
From the jordan336/weather repository on GitHub, at the commit this page was made from: the board is hw/weather.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Weather design in my own project?
Its repository states no licence, so its author keeps all rights: ask jordan336 before reusing the design.