Skip to the content
4 layers17.5 × 40.1 mmSwinSidNano, the printed circuit board in 3D

A small SID replaceable circuit for C64 systems

Size
17.5 × 40.1 mm
Copper layers
4
Thickness
1.6 mm
Parts
15
Nets
41
Pads
90
Tracks, vias
202, 20
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
2 Feb 2018
Updated
2 Feb 2018

Overview

SwinSidNano is an open-source printed circuit board by jonthomasson, from the jonthomasson/SwinSidNano repository on GitHub. It is a 4-layer board of 17.5 × 40.1 mm with 15 parts on 41 nets, routed with 202 tracks and 20 vias.

It is built around the ATMEGA88A-PU. Its parts include 5 resistors, 3 capacitors, 2 ICs and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

Parts

15
QtyValueFootprintReferences
3.1ufCapacitors_SMD:C_0805C2, C3, C4
21kResistors_SMD:R_0805R2, R4
2Jumper_NO_SmallPin_Headers:Pin_Header_Straight_1x02JP1, JP2
12.2kResistors_SMD:R_0805R3
1240kResistors_SMD:R_0805R5
14.7kResistors_SMD:R_0805R1
1Atmega88APHousings_QFP:TQFP-32_7x7mm_Pitch0.8mmU2
1CONN_02X03Pin_Headers:Pin_Header_Straight_2x03P1
1KC5032A32_OSCswinsid:TCO-4TCO1
1LOGOlogo:logoG***
1SwinSIDswinsid:DIP-28_W15.24mmU1

Similar boards

  • 2 layers45 × 69 mmUsbavrfloppy, the printed circuit board in 3D

    Usbavrfloppy

    jtsiomb/usbamigafloppy

    USB floppy controller for Amiga disks

    25 parts69CC-BY-SA-4.0
  • 2 layers177.8 × 160 mmSCTSCHEM, the printed circuit board in 3D

    SCTSCHEM

    ianalj/SCTSCHEM

    SCT32k schematic.

    57 parts
  • 4 layers29 × 50.3 mmLg hvac esp32, the printed circuit board in 3D

    Lg hvac esp32

    JanM321/esphome-lg-controller

    Wired controller for LG HVAC units using ESPHome and ESP32

    15 parts2920BSD
  • 4 layers33.5 × 49 mmProbecard mmcx, the printed circuit board in 3D

    Probecard mmcx

    azonenberg/starshipraider

    Open hardware test equipment

    15 parts193BSD-3-Clause
  • 4 layers28.3 × 54 mmPCB2, the printed circuit board in 3D

    PCB2

    lukasloetkolben/OpenpilotHardware

    Welcome to the Openpilot Hardware Collection!

    15 parts95MIT
  • 4 layers59 × 32 mmCp pi if fit shield, the printed circuit board in 3D

    Cp pi if fit shield

    niklasekstrom/clockport_pi_interface

    Amiga clock port to Raspberry Pi interface

    15 parts61GPL-3.0
  • 4 layers19.5 × 10.5 mmUniversalStepDown, the printed circuit board in 3D

    UniversalStepDown

    RoboticsBrno/RB0005-UniversalStepDown

    Universal step-down module

    15 parts26CC-BY-SA-4.0

Questions

How big is the SwinSidNano PCB?

It measures 17.5 × 40.1 mm and has 4 copper layers, 1.6 mm thick.

What parts does the SwinSidNano use?

15 parts, built around the ATMEGA88A-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SwinSidNano KiCad files?

From the jonthomasson/SwinSidNano repository on GitHub, at the commit this page was made from: the board is rev1.a/SwinSidNano.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the SwinSidNano design in my own project?

Its repository states no licence, so its author keeps all rights: ask jonthomasson before reusing the design.