

Alpha
Software-defined door control
- Size
- 65 × 56 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 78
- Nets
- 61
- Pads
- 237
- Tracks, vias
- 531, 54
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Nov 2017
- Updated
- 23 Aug 2022
Overview
Alpha is an open-source printed circuit board by jonnor, from the jonnor/UnlockOslo repository on GitHub, published under the MIT licence. It is a 2-layer board of 65 × 56 mm with 78 parts on 61 nets, routed with 531 tracks and 54 vias.
It is built around the TPS54202DDC, TMP 10212 and BZX384-C3V3-QX, with the M2.5 and DMP3056L-7 among its other parts. Its parts include 28 resistors, 23 diodes, 7 transistors, 6 capacitors and 6 connectors. It belongs with the home automation and IoT boards of this library.
Main components
5TPS54202DDC
SOT23-64.5V to 28V Input, 2A Output, EMI Friendly Synchronous Step Down ConverterTexas InstrumentsUncategorisedTMP 10212
85-264VAC to ±12VDC (±380mA) 10W Dual Outputs Power SupplyTRACO POWERUncategorisedBZX384-C3V3-QX
SOD-323-65℃~+150℃ 3.1V~3.5V 3.3V 300mW 5uA@1V ±5% SOD-323 Zener Diodes ROHSNexperiaZener DiodesM2.5
-0.45mm 2.5mm 2mm 5mm DIN934 Hex M2.5X0.45 Nickel plated Silver white - Hexagonal nutsShuntianHex NutDMP3056L-7
SOT-23-55℃~+150℃ 1 P-Channel 1.38W 11.8nC@10V 2.1V 30V 4.3A 70mΩ@4.5V P-Channel SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
README
hardware/alpha-3/README.mdParts
78| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 10k | IPC7351-Nominal:RESC1005X38 | R1, R3, R5, R7, R11, R13, R14, R15, R16, R17, R18, R19, R20, R24, R25, R26 +1 |
| 9 | 270 | IPC7351-Nominal:RESC1005X38 | R2, R4, R6, R8, R10, R12, R23, R27, R28 |
| 8 | BZX384C3V3 | Diode_SMD:D_SOD-323 | D13, D14, D15, D16, D17, D18, D19, D20 |
| 6 | DMN2041L-7 | TO_SOT_Packages_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 6 | LED | IPC7351-Nominal:LEDC3216X110 | D2, D4, D6, D8, D10, D12 |
| 6 | S1MTR | Diodes_SMD:D_SMA | D1, D3, D5, D7, D9, D11 |
| 4 | M2.5 | Mounting_Holes:MountingHole_2.5mm | H1, H2, H3, H4 |
| 2 | 0.1u | IPC7351-Nominal:CAPC2012X70 | C1, C3 |
| 2 | 22u | IPC7351-Nominal:CAPC2012X70 | C5, C6 |
| 1 | +5V | Connectors_TestPoints:Test_Point_Pad_d1.0mm | TP1 |
| 1 | 100k | IPC7351-Nominal:RESC1005X38 | R21 |
| 1 | 10u | IPC7351-Nominal:CAPC2012X70 | C2 |
| 1 | 12V | Bitraf:har-flexicon_2,54_TSPH-02_T56_BK | P4 |
| 1 | 13.3k | IPC7351-Nominal:RESC1005X38 | R22 |
| 1 | 15u | Inductors_SMD:L_Taiyo-Yuden_NR-80xx | L1 |
| 1 | 75p | IPC7351-Nominal:CAPC1005X55 | C4 |
| 1 | DMP3056L | Package_TO_SOT_SMD:SOT-23 | Q7 |
| 1 | INPUTS | Bitraf:har-flexicon_2,54_TSPH-08_T56_BK | P2 |
| 1 | OUTPUTS | Bitraf:har-flexicon_2,54_TSPH-12_T56_BK | P1 |
| 1 | POWER | Pin_Headers:Pin_Header_Straight_2x02_Pitch2.54mm | J1 |
| 1 | POWER | IPC7351-Nominal:LEDC3216X110 | D21 |
| 1 | RASPBERRY_PI | Socket_Strips:Socket_Strip_Straight_2x20_Pitch2.54mm | P3 |
| 1 | SERIAL | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | J2 |
| 1 | STATUS_1 | IPC7351-Nominal:LEDC3216X110 | D22 |
| 1 | STATUS_2 | IPC7351-Nominal:LEDC3216X110 | D23 |
| 1 | TMP102 | Bitraf:SOT-563 | U2 |
| 1 | TPS54202 | TO_SOT_Packages_SMD:SOT-23-6_Handsoldering | U1 |
More from jonnor/UnlockOslo
1- 2 layers65 × 56 mm

Similar boards
- 2 layers100 × 75 mm

Display
DLaxV-Community-Projects-Hub/Open-Shot-Clock
Build your own DIY Shot Clock
209 parts5CERN-OHL-P-2.0 - 2 layers101 × 61.4 mm

- 4 layers84 × 41 mm

WormControl Relay15x5t15-ControlBoard
makerspacelt/WormControl-Relay15x5t15-ControlBoard
Dev NOTE: before commit, run ./kibot.sh to regenerate documentation, bom, gerbers and other assets.
93 partsCERN-OHL-S-2.0 - 2 layers85.5 × 86 mm

WormControl Relay15x5t15-PowerBoard
makerspacelt/WormControl-Relay15x5t15-PowerBoard
Dev NOTE: before commit, run ./kibot.sh to regenerate documentation, bom, gerbers and other assets.
53 partsCERN-OHL-S-2.0 - 2 layers6.4 × 14 mm

Micro T Probe
nthrd/MicroTProbe
A breakout for the TMP102 from Texas Instruments small enough to fit inside a ¼ inch copper tube.
11 partsCC-BY-SA-4.0 - 2 layers70 × 50 mm

Esp32 sensor board
Polymath-AS/kicad_automation
Dockerized kicad and mcp tools with autorouter capability and skillset for using the tools.
34 partsMIT - 2 layers90 × 55 mm

S3.1-before repack
puji4810/coffe-scale
USB-C J5 ──► U8 ESD ──► R19/R20 22R ──► U4 IO19/IO20 (native USB-Serial/JTAG) │VBUS ├─► U5 TP4057 充电 ──► J6 1S Li-ion └─► D1/Q1 负载切换 ──► VSYS ──► U6 XC6220 3V3 1A ──► VCC3V3 ──► U4/外设 └──► U7 HT7533 ──► VDDADC ──► U1/U3…
96 partsApache-2.0 - 2 layers15 × 25 mm

Questions
How big is the Alpha PCB?
It measures 65 × 56 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Alpha use?
78 parts, built around the TPS54202DDC, TMP 10212, BZX384-C3V3-QX and M2.5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Alpha KiCad files?
From the jonnor/UnlockOslo repository on GitHub, at the commit this page was made from: the board is hardware/alpha-3/alpha.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Alpha design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).