4 layers39.4 × 83.8 mm
STM32F405 DevBoard
jonghee-son/STM32F405_DevBoard
STM32 development board equipped with STM32F405RGT6
46 parts1Apache-2.0
4 layers39.4 × 83.8 mm
STM32F103 DevBoard
jonghee-son/STM32F103_DevBoardDevelopment board with STM32F103RBT6
- Size
- 39.4 × 83.8 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 89
- Pads
- 241
- Tracks, vias
- 638, 68
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 14 Sep 2023
- Updated
- 15 Mar 2024
Overview
STM32F103 DevBoard is an open-source printed circuit board by jonghee-son, from the jonghee-son/STM32F103_DevBoard repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 39.4 × 83.8 mm with 40 parts on 89 nets, routed with 638 tracks and 68 vias.
It is built around the FT232RNL-REEL, BSI-10 and B3U-1000P, with the TLV75733PDBVR-MS and USB4800-03-A among its other parts. Its parts include 13 resistors, 9 capacitors, 4 connectors, 3 switches and 2 ICs. It belongs with the microcontroller boards boards and the STM32 boards of this library.
Main components
5
FT232RNL-REEL
SSOP-28-40℃~+85℃ 15mA 3.3V~5.25V 70uA USB 2.0 USB to UART SSOP-28 USB Converters ROHSFTDIUSB Converters
BSI-10
插件,10x2.5mm-40℃~+85℃ 1,000 times 10mm 12V 2.5mm 500mA 6.4mm PC Pin Red SPDT Through Hole 插件,10x2.5mm Slide Switches ROHSSM SwitchSlide Switches
B3U-1000P
SMD,3x2.5mm-25℃~+70℃ 1.53N 1.6mm 12V 2.5mm 3mm 50mA Round Button SMD(SMT) Tab SPST Surface Mount,Vertical SMD,3x2.5mm Tactile Switches ROHSOmronTactile Switches
TLV75733PDBVR-MS
SOT-23-5SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMSKSEMIUncategorisedUSB4800-03-A
SMD-25℃~+85℃ 1 12P 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 20 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R7, R13, R14 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C5, C10 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10, R11 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 2 | 12pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11, C12 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C6 |
| 2 | 20pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3 |
| 2 | 330 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R12 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | BSI-10 | SamacSys_Parts:BSI10 | S2, S3 |
| 2 | Conn_01x20_Pin | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J2, J3 |
| 1 | 8MHz | Crystal:Crystal_SMD_HC49-SD_HandSoldering | Y1 |
| 1 | B3U-1000P | digikey-footprints:Switch_Tactile_SMD_B3U-1000P | S1 |
| 1 | Conn_ARM_JTAG_SWD_20 | Connector_IDC:IDC-Header_2x10_P2.54mm_Vertical | J1 |
| 1 | Crystal_GND23 | Crystal:Crystal_SMD_SeikoEpson_MC306-4Pin_8.0x3.2mm_HandSoldering | Y2 |
| 1 | FT232RNL-REEL | SamacSys_Parts:SOP65P780X200-28N | IC2 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2 |
| 1 | RED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | STM32F103RBTx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | TLV75733PDBVR | SamacSys_Parts:SOT95P280X145-5N | PS1 |
| 1 | USB4800-03-A | SamacSys_Parts:USB480003A | J6 |
The 36 most common of 40 parts.
Questions
How big is the STM32F103 DevBoard PCB?
It measures 39.4 × 83.8 mm and has 4 copper layers, 1.6 mm thick.
What parts does the STM32F103 DevBoard use?
40 parts, built around the FT232RNL-REEL, BSI-10, B3U-1000P and TLV75733PDBVR-MS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the STM32F103 DevBoard KiCad files?
From the jonghee-son/STM32F103_DevBoard repository on GitHub, at the commit this page was made from: the board is STM32F103_dev_board.kicad_pcb and its schematic STM32F103_dev_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the STM32F103 DevBoard design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers50 × 111 mm
- 4 layers180.4 × 157.2 mm
- 4 layers127.8 × 56.1 mm
Controller
sudo-junkie/Controller
ESP32-based replacement PCB for UCOM USB game controller, with LCD, IMU, IR TX/RX and more...
105 parts1 - 2 layers27.5 × 41.5 mm
- 2 layers391.2 × 166.5 mm
Takt11800
vuckale/takt11800
Replacement PCB for Cherry G80 11800/Compaq MX 11800 keyboard using QMK firmware and VIA
284 parts12CERN-OHL-S-2.0 - 2 layers341.8 × 195.5 mm
VesselV3(USB HS)
Hy-5/VesselV3
Custom "Vessel" Keyboard - PCB + 3D Case Model + Firmware + Keycaps vector
389 partsMIT - 2 layers132 × 56 mm
Dashboard
marcutudor79/electronic-module-for-the-dashboard-of-upbdrive-racing-car
My Bachelor's degree that consists of the electronic module for the Formula Student race car and it's testing module
127 partsApache-2.0