4 layers39.3 × 61.8 mm
MCL64
MicroCoreLabs/Projects
Ted Fried's MicroCore Labs Projects - FPGA CPU cores and emulators for the 8088, 8086, 8051, 6502, 68000, Z80, Risc-V, and also Typewriter and EPROM Emulator projects.
9 parts534
4 layers83.8 × 69.3 mm
Badge PCB
jondurrant/RPIPicoTFT2.45This is a demonstration of using a MSP2401 2.4 TFT screen driven by ILI9341 from Raspberry PI Pico
- Size
- 83.8 × 69.3 mm
- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 9
- Nets
- 45
- Pads
- 86
- Tracks, vias
- 157, 4
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 13 May 2024
- Updated
- 23 May 2024
Overview
Badge PCB is an open-source printed circuit board by jondurrant, from the jondurrant/RPIPicoTFT2.4 repository on GitHub, published under the MIT licence. It is a 4-layer board of 83.8 × 69.3 mm with 9 parts on 45 nets, routed with 157 tracks and 4 vias.
Its parts include 3 connectors, 1 resistor, 1 IC and 1 diode. It belongs with the lEDs and displays boards and the RP2040 boards of this library.
README
README.mdRPIPicoTFT2.4
This is a demonstration of using a MSP2401 2.4 TFT screen driven by ILI9341 from Raspberry PI Pico
The Repo goes along with a video on my YouTube channel
Display
The display I used is MSP2401 or a generic version of. Purchased from Kunkune
Basic Example
This example demonstrates basic control of the screen to display rectangles.
Connectivity
- 12, //SDO(MISO)
- 9, //CS
- 10, //SCK
- 11, //SDI(MOSI)
- 15, //RESET
- 8, //DC/RS
- 13, //LEDParts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x02_Male | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J1, J2 |
| 1 | 100R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | Conn_01x04_Female | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | TFT1B1 |
| 1 | Conn_01x06_Female | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | Conn_01x14_Female | Connector_PinSocket_2.54mm:PinSocket_1x14_P2.54mm_Vertical | TFT1A1 |
| 1 | Conn_02x06_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Horizontal | TPM1 |
| 1 | LED | LED_THT:LED_D1.8mm_W3.3mm_H2.4mm | D1 |
| 1 | Pico | Raspberry_Pi_Pico_W_Kicad_Files:MODULE_SC0918 | U1 |
Similar boards
- 4 layers79.2 × 26.3 mm
HPE FlexibleLOM adapter x4
TobleMiner/HPE-FlexibleLOM-adapter
Adapter for using HPE FlexibleLOM cards in full height PCIe slots
9 parts246GPL-3.0 - 4 layers74 × 42 mm
- 4 layers
ErOled096 1 1
BerkeleyHCI/PolymorphicBlocks
A Python-based hardware description language for PCBs for higher-level (block-diagram / system-architecture level) PCB design through libraries of directly reusable subcircuit generators.
9 parts94BSD-3-Clause - 4 layers108 × 31.8 mm
Simm72 rom plcc
agranlund/raven
Homemade MC68060 + DSP56303 Atari-compatible computer. Hardware, firmware, and software stack
9 parts87 - 4 layers36.3 × 21.1 mm
Board main xiao
m-kozlowski/airbridge
Wireless adapter for AirSense/AirCurve 10 devices
9 parts26GPL-3.0 - 4 layers151.9 × 99.8 mm
Nqvme template
thorpej/pg68k
The 68k Playground, a 680x0-based home-brew computer with multiple CPU options
9 parts15 - 4 layers27 × 56 mm
Receiver
will127534/CSI-2-FourLane-HDMI-Extender
A simple MIPI CSI-2 extender with 4-lane support through HDMI cable
9 parts15MIT
Questions
How big is the Badge PCB PCB?
It measures 83.8 × 69.3 mm and has 4 copper layers, 4.69 mm thick.
What parts does the Badge PCB use?
9 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Badge PCB KiCad files?
From the jondurrant/RPIPicoTFT2.4 repository on GitHub, at the commit this page was made from: the board is pcb/Badge PCB/Badge PCB.kicad_pcb and its schematic pcb/Badge PCB/Badge PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Badge PCB design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).