Skip to the content
2 layers83.7 × 60.6 mmZ80 Sync Buss Controller (NVC-285), the printed circuit board in 3D

Z80 Sync Buss Controller (NVC-285)

joncco/pacman-Z80-Sync-Buss-Controller

This is a reproduction of the Z80 Sync Buss Controller used in Midway's Pac-Man arcade PCB.

Size
83.7 × 60.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
50
Pads
170
Tracks, vias
596, 23
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
11 Dec 2024
Updated
12 Dec 2024

Overview

Z80 Sync Buss Controller (NVC-285) is an open-source printed circuit board by joncco, from the joncco/pacman-Z80-Sync-Buss-Controller repository on GitHub. It is a 2-layer board of 83.7 × 60.6 mm with 15 parts on 50 nets, routed with 596 tracks and 23 vias.

Its parts include 8 ICs, 3 capacitors, 1 resistor and 1 connector. It belongs with the retro computing and games boards of this library.

README

README.md

This is a reproduction of the Z80 Sync Buss Controller used in Midway's Pac-Man arcade PCB.

Parts

15
QtyValueFootprintReferences
30.1uFPACLIB:C_Axial_L3.8mm_D2.5mm_P12.685mm_HorizontalC6, C7, C8
2LS02Package_DIP:DIP-14_W7.62mm_LongPadsU1, U3
2LS374Package_DIP:DIP-20_W7.62mm_LongPadsU6, U7
2LS74Package_DIP:DIP-14_W7.62mm_LongPadsU2, U4
2MountingHoleMountingHole:MountingHole_3mmH1, H2
11KPACLIB:R_Axial_DIN0207_L6.3mm_D2.5mm_P12.685mm_HorizontalR1
1Conn_02x12_Counter_ClockwisePackage_DIP:DIP-28_W15.24mm_LongPadsJ1
1LS139Package_DIP:DIP-16_W7.62mm_LongPadsU0
1LS244Package_DIP:DIP-20_W7.62mm_LongPadsU5

Similar boards

  • 2 layers19 × 76 mmSub, the printed circuit board in 3D

    Sub

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    15 parts3kApache-2.0
  • 2 layers26.7 × 62.2 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    15 parts1kGPL-3.0
  • 2 layers100 × 44 mmVideoslot, the printed circuit board in 3D

    Videoslot

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    15 parts1k
  • 2 layers91 × 51 mmBusinessCard, the printed circuit board in 3D

    BusinessCard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    15 parts915
  • 2 layers24.3 × 57.9 mmFlosspods pro flex, the printed circuit board in 3D

    Flosspods pro flex

    kenp-io/not-for-airpods-repairs

    The content of this repository is licensed under the WTFPL License. Please have a close look at the terms before using this material.

    15 parts609WTFPL
  • 2 layers20.3 × 15.2 mmL0 Load, the printed circuit board in 3D

    L0 Load

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    15 parts546MIT
  • 2 layers68 × 50 mmEleLab v2 PowerFeed, the printed circuit board in 3D

    EleLab v2 PowerFeed

    Chrismettal/EleLab_v2

    Cheap DIY lab system for hobbyists and the tinkering folk

    15 parts531GPL-3.0
  • 2 layers50.8 × 35.6 mmInterface, the printed circuit board in 3D

    Interface

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    15 parts454

Questions

How big is the Z80 Sync Buss Controller (NVC-285) PCB?

It measures 83.7 × 60.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Z80 Sync Buss Controller (NVC-285) use?

15 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Z80 Sync Buss Controller (NVC-285) KiCad files?

From the joncco/pacman-Z80-Sync-Buss-Controller repository on GitHub, at the commit this page was made from: the board is Z80 Sync Buss Controller (NVC-285).kicad_pcb and its schematic Z80 Sync Buss Controller (NVC-285).kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Z80 Sync Buss Controller (NVC-285) design in my own project?

Its repository states no licence, so its author keeps all rights: ask joncco before reusing the design.