
Blade connector
jonathanwpaul/lightsaber-electronics
electronics (KiCAD) files for lightsaber project

electronics (KiCAD) files for lightsaber project
Full lightsaber is an open-source printed circuit board by jonathanwpaul, from the jonathanwpaul/lightsaber-electronics repository on GitHub. It is a 2-layer board of 67.5 × 27.4 mm with 13 parts on 38 nets, routed with 98 tracks and 4 vias.
Its parts include 3 resistors, 3 ICs, 3 switches, 1 diode and 1 connector. It belongs with the ESP8266 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 170 | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R1 |
| 1 | 330 | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R2 |
| 1 | 500 | Resistor_SMD:R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R4 |
| 1 | Battery_Cell (Output of TP4056 breakout) | Connector_Wire:SolderWire-1sqmm_1x02_P7.8mm_D1.4mm_OD3.9mm | BT1 |
| 1 | INPUT_SW | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | SW3 |
| 1 | LED_STRIP | Connector_Wire:SolderWire-1sqmm_1x03_P7.8mm_D1.4mm_OD3.9mm | D2 |
| 1 | MAX98357A | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | U3 |
| 1 | MPU6050 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | U1 |
| 1 | NodeMCU | ESP8266:SEEED_113990105 | U2 |
| 1 | PWR_SW | Connector_Wire:SolderWire-1sqmm_1x02_P7.8mm_D1.4mm_OD3.9mm | SW1 |
| 1 | ROT_ENC | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | SW2 |
| 1 | SD | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | screen | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | OL1 |

jonathanwpaul/lightsaber-electronics
electronics (KiCAD) files for lightsaber project



samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.

fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments


willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 67.5 × 27.4 mm and has 2 copper layers, 1.6 mm thick.
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jonathanwpaul/lightsaber-electronics repository on GitHub, at the commit this page was made from: the board is full-lightsaber.kicad_pcb and its schematic blade-connector/blade-connector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jonathanwpaul before reusing the design.