Skip to the content
2 layers42 × 31 mmESP32C6 Temp Sensor, the printed circuit board in 3D

A PCB for is designed for use with the 'ESP32 Zero' boards and 1-Wire sensors.

Size
42 × 31 mm
Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
20
Pads
45
Tracks, vias
62, 5
Pours
1
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
12 Oct 2024
Updated
12 Oct 2024

Overview

ESP32C6 Temp Sensor is an open-source printed circuit board by jonathanadams, from the jonathanadams/pcb-esp32-zero-1-wire repository on GitHub. It is a 2-layer board of 42 × 31 mm with 11 parts on 20 nets, routed with 62 tracks and 5 vias.

It is built around the DS18B20. Its parts include 7 ICs, 2 resistors and 1 diode. It belongs with the sensors and measurement boards and the ESP32 and RISC-V boards of this library.

Main components

1

README

README.md

ESP32-Zero 1-Wire Sensor

This PCB for is designed for use with the 'ESP32 Zero' boards such as Waveshare ESP32-C6-Zero or Waveshare ESP32-C3-Zero and 1-Wire sensors. You can hook up any 1-Wire sensors but it was primarialy designed to be used with Dallas DS18B20 temperature sensors.

Features

  • Footprint for soldering castelated EPS32-C6-Zero or ESP32-C3-Zero board
  • 6x terminal block 1-Wire ports
  • Mode select solder jumper for Normal/Paraside modes
  • 42mm x 31mm borard

Schematic

Schematic

Bill of Materials

RefQtyDescription/ValueNotes
U11ESP32-C3-Zero or ESP32-C6-Zero
U2-U76KF128 2.54mm Pitch 3P Screw Terminal
R110805/2012 SMD Resistor (4.7k Ohm)
R210805/2012 SMD Resistor (75 Ohm)Check D1 LED Requirements
D110805/2012 SMD LEDCheck R2 Resistor Requirements

Parts

11
QtyValueFootprintReferences
6DS18B20TerminalBlock:TerminalBlock_Xinya_XY308-2.54-3P_1x03_P2.54mm_HorizontalU2, U3, U4, U5, U6, U7
14k7Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
175Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2
1LEDLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD1
1SolderJumper_3_Bridged12Jumper:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm_NumberLabelsJP1
1~Waveshare-ESP32:Waveshare-ESP32-C6-ZeroU1

Similar boards

  • 2 layers33.7 × 97.8 mmHAN ESP TSS721, the printed circuit board in 3D

    HAN ESP TSS721

    UtilitechAS/amsreader-firmware

    ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported

    29 parts470
  • 2 layers121 × 68 mmFreeds sanchez, the printed circuit board in 3D

    Freeds sanchez

    pablozg/freeds

    Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora

    42 parts108
  • 2 layers80 × 54.9 mmESP32WifiAisTempVolt2, the printed circuit board in 3D

    ESP32WifiAisTempVolt2

    AK-Homberger/NMEA2000WifiGateway-with-ESP32

    This repository shows how to build a NMEA2000 WiFi Gateway with voltage and temperature alarms.

    18 parts94GPL-3.0
  • 2 layers52 × 61 mmArduino motorfocus, the printed circuit board in 3D

    Arduino motorfocus

    fehlfarbe/arduino-motorfocus

    Arduino motorfocus with moonlite protocol for telescopes

    23 parts58MIT
  • 2 layers69 × 57 mmBuoy4, the printed circuit board in 3D

    Buoy4

    wjpavalko/Maker-Buoy

    Repository of Open Source Maker Buoy Files

    46 parts39
  • 2 layers26 × 34.8 mmWemosD1Mini, the printed circuit board in 3D

    WemosD1Mini

    RuiSantosdotme/ESP8266-Multisensor-Shield

    Complete step-by-step instructions »

    10 parts29
  • 2 layers162 × 60 mmEsp shield, the printed circuit board in 3D

    Esp shield

    felixwittwer/homeassistant_automaic_greenhouse

    A cool Project to make your greenhouse smart. What about automaic irrigation and collecting enviromental data right from your garden.

    20 parts27
  • 2 layers123 × 87.5 mmFastLOGIC, the printed circuit board in 3D

    FastLOGIC

    Neumi/fastLOGIC

    An affordable Arduino-based board designed for straightforward (industrial) logic control, ideal for building small-scale automation and control solutions.

    180 parts23MIT

Questions

How big is the ESP32C6 Temp Sensor PCB?

It measures 42 × 31 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ESP32C6 Temp Sensor use?

11 parts, built around the DS18B20. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ESP32C6 Temp Sensor KiCad files?

From the jonathanadams/pcb-esp32-zero-1-wire repository on GitHub, at the commit this page was made from: the board is kicad/ESP32C6 Temp Sensor.kicad_pcb and its schematic kicad/ESP32C6 Temp Sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ESP32C6 Temp Sensor design in my own project?

Its repository states no licence, so its author keeps all rights: ask jonathanadams before reusing the design.