4 layers58 × 18 mm
6 layers55 × 65 mm
Vektor
jonasblixt/vektor4Digital Speaker
- Size
- 55 × 65 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 257
- Nets
- 147
- Pads
- 709
- Tracks, vias
- 1,295, 280
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Dec 2018
- Updated
- 8 Aug 2019
Overview
Vektor is an open-source printed circuit board by jonasblixt, from the jonasblixt/vektor repository on GitHub, published under the BSD-3-Clause licence. It is a 6-layer board of 55 × 65 mm with 257 parts on 147 nets, routed with 1,295 tracks and 280 vias.
It is built around the LMZ10501SILR, XCL226A0K1H2 and TAS2770YFF, with the 74LVCH1T45GW, 25AA1024-I/P and NX3225SA-12.288M-STD-CRS-2 among its other parts. Its parts include 112 capacitors, 24 resistors, 17 ICs, 3 transistors and 3 connectors.
Main components
9
LMZ10501SILR
USIP-8-40℃~+125℃ 1 100uF 10mVp-p 1A 2.6mm 2.7V~5.5V 2MHz 3mm 6.5mA 600mV~3.6V 95% Buck Overheat protection、Over Current Protection ±1.75% USIP-8 DC-DC Power Modules ROHSTexas InstrumentsPower ModulesXCL226A0K1H2
DFN3030-10BDC-DC Power ModulesTorex Semiconductor
TAS2770YFF
DSBGA-30-40℃~+85℃ 0.01% 1-Channel 108dB 20Wx1@4Ω 4.5V~18V 82.5% 90dB Automatic mute/no-noise switch、Enable/shutdown function Class D DSBGA-30 Audio Amplifiers ROHSTexas InstrumentsAudio Amplifiers
74LVCH1T45GW
SC-88-40℃~+125℃ 1 1 1.2V~5.5V 1.2V~5.5V 420Mbps Bidirectional Power-Off Protection Tri-State SC-88 Translators, Level Shifters ROHSNexperiaTranslators, Level Shifters
25AA1024-I/P
PDIP-8-40℃~+85℃ 1,000,000 cycles 1.8V~5.5V 1Mbit 200 Years 20MHz 6ms Hardware write protection function、Software write protection function、Built-in power-on reset (POR)、Page write protection function、Built-in write enable latch (WEL) SPI PDIP-8 EEPROM ROHSMicrochip TechnologyEEPROM
NX3225SA-12.288M-STD-CRS-2
SMDCrystalsNDK
PHPT61002PYCLHX
SOT-669-55℃~+175℃ 1 PNP 100V 125MHz 2A 300mV 3W 50uA 80 8V PNP SOT-669 Bipolar (BJT) ROHSNexperiaBipolar (BJT)PUMD13
TSSOP-6(SOT-363)-65℃~+150℃ 1 NPN Pre-Biased, 1 PNP Pre-Biased 1.3V 10 100 100mA 100mV 100nA 230MHz 300mW 4.7kΩ 500mV 50V 5V NPN+PNP TSSOP-6(SOT-363) Digital Transistors ROHSNexperiaDigital TransistorsPUMH13
SOT-363-6-65℃~+150℃ 1.3V 100 100mA 100mV 100nA 12 2 NPN (Pre-Biased) 230MHz 300mW 4.7kΩ 500mV 50V 5V NPN SOT-363 Digital Transistors ROHSNexperiaDigital Transistors
README
README.mdVektor
Digital Speaker
Parts
257| Qty | Value | Footprint | References |
|---|---|---|---|
| 69 | TP | footprints:TP_1mm | TP1, TP2, TP3, TP10, TP11, TP12, TP13, TP14, TP17, TP20, TP21, TP22, TP23, TP24, TP27, TP30 +53 |
| 45 | C0603_100n_50Vdc_X7R | C0603 | C1, C2, C3, C10, C11, C12, C17, C19, C20, C21, C23, C24, C27, C28, C29, C30 +29 |
| 19 | C0603_1u_16Vdc_X7R | C0603 | C61, C65, C71, C76, C81, C86, C87, C88, C89, C90, C91, C92, C93, C94, C100, C101 +3 |
| 16 | BL0603_BLM18EG121SN1D | L0603 | FB1, FB2, FB3, FB4, FB5, FB6, FB7, FB8, FB9, FB10, FB11, FB12, FB13, FB14, FB15, FB16 |
| 12 | C0805_10u_6.3Vdc_X7R | C0805 | C55, C56, C66, C79, C103, C104, C105, C106, C108, C109, C110, C112 |
| 9 | C0805_1u_50Vdc_X7R | C0805 | C4, C7, C13, C22, C25, C31, C40, C43, C49 |
| 7 | R0603_10k | R0603 | R1, R9, R10, R11, R16, R18, R20 |
| 6 | 74LVCH1T45GW | footprints:SOT-363_SC-70-6 | U10, U11, U12, U13, U14, U15 |
| 6 | C0603_1n2_50Vdc_C0G | C0603 | C16, C18, C34, C36, C52, C54 |
| 6 | C0805_10u_35Vdc_X5R | C0805 | C8, C14, C26, C32, C44, C50 |
| 6 | MHNP_2.5mm | footprints:MH_2.5mm | M1, M2, M3, M4, M5, M6 |
| 4 | BL0603_BLM18AG601SH1D | L0603 | FB17, FB18, FB19, FB20 |
| 4 | PCAP_120u_2 | footprints:CP_Elec_10x10 | C15, C33, C51, C85 |
| 3 | TAS2770 | RJQ0026A | U1, U2, U3 |
| 2 | C0603_22p_50Vdc_C0G_2 | C0603 | C73, C77 |
| 2 | C0603_470p_100Vdc_C0G | C0603 | C107, C111 |
| 2 | C0805_10u_25Vdc_X7R(Murata) | C0805 | C84, C95 |
| 2 | LMZ10501SILR | TI_LMX_SIL | U16, U17 |
| 2 | R0603_100k | R0603 | R17, R22 |
| 2 | R0603_1R | R0603 | R4, R5 |
| 2 | R0603_1k50 | R0603 | R12, R13 |
| 2 | R0603_470R | R0603 | R14, R15 |
| 1 | 1206SFS200F_63-2 | footprints:Fuse_1206_3216Metric | F1 |
| 1 | 25AA1024 | footprints:DFN-8-1EP_6x5mm_P1.27mm_EP4x4mm | U7 |
| 1 | 430450427 | Molex_430450427 | J3 |
| 1 | 430450629 | Molex_430450629 | J2 |
| 1 | ADAU1467 | CP-88-10 | U4 |
| 1 | C0603_10n_50Vdc_X7R | C0603 | C59 |
| 1 | C0603_150p_50Vdc_C0G_2 | C0603 | C75 |
| 1 | C0603_18p_100Vdc_C0G | C0603 | C102 |
| 1 | C0603_5n6_25Vdc_C0G | C0603 | C72 |
| 1 | C0805_100n_25Vdc_X7R | C0805 | C97 |
| 1 | IHLP2020_4u7_31 | IHLP2020 | L1 |
| 1 | LP3470IM5X-3.08_NOPB | footprints:SOT-23-5 | U8 |
| 1 | NX3225SA-12.288M-STD-CRS-2 | NX3225SA | X1 |
| 1 | PHPT61002PYCLHX | footprints:PowerPAK_SO8 | Q1 |
| 1 | PLR135_T10 | PLR135_T10 | U5 |
| 1 | PLT133_T10W | PLT133_T10W | U6 |
| 1 | PUMD13 | footprints:SOT-363_SC-70-6 | Q3 |
| 1 | PUMH13 | footprints:SOT-363_SC-70-6 | Q2 |
| 1 | R0603_100R | R0603 | R8 |
| 1 | R0603_118k | R0603 | R25 |
| 1 | R0603_120k | R0603 | R24 |
| 1 | R0603_150k | R0603 | R26 |
| 1 | R0603_187k | R0603 | R27 |
| 1 | R0603_1k | R0603 | R6 |
| 1 | R0603_4k30 | R0603 | R7 |
| 1 | R0603_680k | R0603 | R23 |
| 1 | R0603_82k50 | R0603 | R28 |
| 1 | TE_5103310-1 | footprints:TE_5103310_1 | J1 |
| 1 | XCL226A0K1H2 | Torex_XCL22_QFN | U9 |
Questions
How big is the Vektor PCB?
It measures 55 × 65 mm and has 6 copper layers, 1.6 mm thick.
What parts does the Vektor use?
257 parts, built around the LMZ10501SILR, XCL226A0K1H2, TAS2770YFF and 74LVCH1T45GW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Vektor KiCad files?
From the jonasblixt/vektor repository on GitHub, at the commit this page was made from: the board is hw/vektor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Vektor design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers76 × 99.9 mm
- 2 layers112.3 × 133.4 mm
- 4 layers60 × 60 mm
WeatherStation
LStranc/WeatherStation
A Wifi Weather Station for personal use at home. Contains Gerber files, microcontroller code, and server code.
84 parts - 2 layers240 × 194 mm
Infinitas
freeDSP/freeDSP-INFINITAS
USB Audio Class 2 compliant audio interface with up to 32 input and up to 32 output channels and optional ADAU1452 DSP.
1,020 parts35 - 4 layers100 × 100 mm
Adau1452 dsp core
EDA-bench/eda-bench
Execution-based benchmark for open-book KiCad PCB reconstruction agents
377 parts4 - 4 layers100 × 100 mm
- 6 layers22 × 80 mm
M2SmartHome
lukasznowarkiewicz/M2SmartHome
Setting up a smart home hub, such as running Home Assistant, often requires hardware with sufficient performance and connectivity options.
257 parts2