2 layers199.4 × 50.8 mm
Nixie board
vascofazza/cloxie_nixie_clock
Schematics and code for Cloxie: my Nixie Tube Clock.
85 parts17GPL-3.0
2 layers86 × 34.7 mm
Tinylamp
JonahderTyp/tinylamp- Size
- 86 × 34.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 51
- Pads
- 170
- Tracks, vias
- 207, 38
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 15 Nov 2022
- Updated
- 14 Jul 2024
Overview
Tinylamp is an open-source printed circuit board by JonahderTyp, from the JonahderTyp/tinylamp repository on GitHub. It is a 2-layer board of 86 × 34.7 mm with 41 parts on 51 nets, routed with 207 tracks and 38 vias.
It is built around the WEMOS D1 MINI and WS2812B. Its parts include 34 diodes, 3 connectors, 2 switches, 1 resistor and 1 IC. It belongs with the ESP8266 boards of this library.
Main components
2Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 34 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D101, D102, D201, D202, D203, D204, D205, D206, D207, D208, D209, D210, D211, D212, D213, D214 +18 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J101, J102 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_PTS647_Sx50 | SW101, SW102 |
| 1 | 110R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R101 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J103 |
| 1 | WeMos_D1_mini | Module:WEMOS_D1_mini_light | U101 |
Questions
How big is the Tinylamp PCB?
It measures 86 × 34.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tinylamp use?
41 parts, built around the WEMOS D1 MINI and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tinylamp KiCad files?
From the JonahderTyp/tinylamp repository on GitHub, at the commit this page was made from: the board is PCB/tinyLamp.kicad_pcb and its schematic PCB/RGBleds.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tinylamp design in my own project?
Its repository states no licence, so its author keeps all rights: ask JonahderTyp before reusing the design.
Similar boards
- 2 layers86 × 44.5 mm
Kiwi EasyBoardv1.2
SWAT-engineering/kiwi-air-monitor
Kiwi monitor is an open source CO2/Humidity/Temperature sensor intended for monitoring the quality of the air in a room. Kiwi was created to support teachers with a notification to ventilate their classroom.
21 parts10GPL-3.0 - 2 layers
37c3PCBLEDC100R Rev.1
c3re/37c3PCBLEDC100R
Solder-Kit with some LEDs. Can also be used as a coaster for drinks.
25 parts7CC-BY-4.0 - 2 layers104.4 × 52.8 mm
PN5180 Wemos PCB
Hasenpups/PN5180_ESP_Reader
This work is licensed under a [Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License][cc-by-nc-sa].
7 parts7 - 2 layers158.7 × 185.8 mm
ESP8266XmasTree
lugsaar/ESP8266XmasTree
ESP8266 based PCB Xmas tree with WS2812B LEDs as Christmas lights. The Christmas tree can be easily controlled with systems like Tasmota or ESPHome.
55 parts4 - 2 layers77 × 34.5 mm
- 2 layers100 × 100 mm
- 2 layers90 × 76 mm
Feeder diagram
Hanra-s-work/cat_feeder
This is the repository that will contain the IOT project.
76 partsMIT