
ArmLEDsPrototype
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Breakout PCB for DIP-24 packages with busbars
BussedBreakoutDIP24 is an open-source printed circuit board by johslarsen, from the johslarsen/bussedBreakoutDIP24 repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 18.4 × 36.2 mm with 35 parts on 45 nets, routed with 51 tracks and 4 vias.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | Jumper_2_Bridged | SMD:SolderJumper-2_0402_Bridged_Unmarked | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP9, JP10, JP11, JP12, JP13, JP14, JP17 |
| 12 | Conn_01x04_Pin | 2.54mm_Pin_Headers:Standalone_1x04 | J9, J10, J11, J12, J13, J14, J15, J16, J17, J18, J19, J20 |
| 4 | Conn_01x01_Pin | 2.54mm_Pin_Headers:Castellated_corner | J2, J3, J6, J7 |
| 2 | Conn_01x05_Pin | 2.54mm_Pin_Headers:Castellated_2x05 | J4, J5 |
| 2 | Conn_01x12_Pin | 2.54mm_Pin_Headers:Castellated_2x12 | J1, J8 |

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons

Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.




It measures 18.4 × 36.2 mm and has 2 copper layers, 1.6 mm thick.
35 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the johslarsen/bussedBreakoutDIP24 repository on GitHub, at the commit this page was made from: the board is bussedBreakoutDIP24.kicad_pcb and its schematic bussedBreakoutDIP24.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).