
Sweepbling lp pcb
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.

Breakout PCB for grids of 0805/0402 packages with busbars
BussedBreakoutSMD is an open-source printed circuit board by johslarsen, from the johslarsen/bussedBreakoutSMD repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 18.4 × 36.2 mm with 59 parts on 91 nets, routed with 243 tracks and 98 vias.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | Jumper_2_Bridged | SMD:SolderJumper-2_0402_Bridged_Unmarked | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP10, JP11, JP12, JP13, JP14, JP15, JP16, JP17, JP18 +2 |
| 12 | Conn_01x06_Pin | SMD:SMD_0805_grid_1x6 | J9, J10, J11, J12, J13, J14, J15, J16, J17, J18, J19, J20 |
| 11 | Conn_01x24_Pin | SMD:SMD_grid_2x12_0402 | J21, J22, J23, J24, J25, J26, J27, J28, J29, J30, J31 |
| 8 | Jumper_2_Small_Open | SMD:SolderJumper-2_0402_Open_Unmarked | JP20, JP21, JP22, JP23, JP24, JP25, JP26, JP27 |
| 4 | Conn_01x01_Pin | 2.54mm_Pin_Headers:Castellated_corner | J2, J3, J6, J7 |
| 2 | Conn_01x05_Pin | 2.54mm_Pin_Headers:Castellated_2x05 | J4, J5 |
| 2 | Conn_01x12_Pin | 2.54mm_Pin_Headers:Castellated_2x12 | J1, J8 |
| 2 | Jumper_2_Small_Bridged | SMD:SolderJumper-2_0402_Open_Unmarked | JP19, JP28 |

davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.


VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!

jackw01/scanlight
A better light source for scanning color negative film

ChrisChrisLoLo/beyblock20
The magnetic, modular, 20-key macropad that can join together to form an ortholinear board

sadekbaroudi/vik
This is a VIK module designed to mount a PER56 scroll ring, with a 35mm Cirque Trackpad and optional WS2812B LEDs.
It measures 18.4 × 36.2 mm and has 2 copper layers, 1.6 mm thick.
59 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the johslarsen/bussedBreakoutSMD repository on GitHub, at the commit this page was made from: the board is bussedBreakoutSMD.kicad_pcb and its schematic bussedBreakoutSMD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).