Skip to the content
2 layers22.9 × 52.1 mmEurorackPower10pin, the printed circuit board in 3D

Eurorack 10-pin power breakout, designed to fit a standard breadboard

Size
22.9 × 52.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
9
Pads
36
Tracks, vias
48, 0
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
20 Jun 2020
Updated
4 Oct 2023

Overview

EurorackPower10pin is an open-source printed circuit board by johnsquibb, from the johnsquibb/EurorackPowerBreakout repository on GitHub, published under the MIT licence. It is a 2-layer board of 22.9 × 52.1 mm with 13 parts on 9 nets, routed with 48 tracks and 0 vias.

Its parts include 7 connectors, 2 capacitors, 2 resistors and 2 diodes.

README

README.md

EurorackPowerBreakout

Eurorack 10-pin power breakout, designed to fit a standard breadboard. Learn More

Features

  • Designed for use with 10 pin keyed horizontal box header.
  • Fits standard breadboard with attached bus bars having 0.1" lead spacing.
  • +/-12V with button power on/off (optional)
  • LED indicators (optional).
  • 10uF local power bypass (optional)

Usage

The breakout board is designed to be placed on the left-hand or right-hand side of a standard breadboard with 0.1" lead spacing. For the left-hand orientation, the -12V connection will be on the top power bus rail, and +12V on the bottom. This coincides with the power pins of a left-hand orientation of a TL074 op amp IC package that I frequently use (pins 4 and 11). See image for a visual reference.

The LEDs are optional, and can be omitted and/or replaced with extra header pins. I use the convention of red for +12V and yellow for -12V. I use a minimum of 1k ohm resistors for LEDs, but higher values may be used to reduce the brightness.

The DPDT power button is optional and can be replaced with header pins and jumpers, or omitted entirely. If omitted, pins 2 and 3 must be bridged for DPDT_A and DPDT_B connections (Note: pin 1 is identified by square pad).

The power bypass capacitors are optional and can be omitted without modification to the circuit. I recommend using at least 50V capacitors for +/-12V Eurorack power connections. I've linked my preferred caps below in the Bill of Materials, as they are short and less susceptible to bending when handling the board.

Bill of Materials

All through-hole components.

Here's a list of some of the specialized parts:

See the interactive BOM document for interactive visual guide.

License

Schematic and PCB designs by John Squibb are licensed under MIT (see LICENSE).

All other software dependencies are the copyright of their respective owners.

See KiCad and InteractiveHtmlBom projects for their software licenses:

Parts

13
QtyValueFootprintReferences
210uFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC1, C2
21KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2
2LEDLED_THT:LED_D3.0mmD1, D2
1DPDT_AConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ2
1DPDT_BConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ4
1Eurorack PowerConnector_IDC:IDC-Header_2x05_P2.54mm_HorizontalJ1
1RailPinBot AConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ5
1RailPinBot BConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ7
1RailPinTop AConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ3
1RailPinTop BConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ6

Similar boards

  • 2 layers40 × 20 mmUsb uart, the printed circuit board in 3D

    Usb uart

    earthtojake/text-to-cad

    Design physical products with AI

    13 parts26kMIT
  • 2 layers35 × 29 mmMagSpoofTC, the printed circuit board in 3D

    MagSpoofTC

    samyk/magspoof

    A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.

    13 parts4.2k
  • 2 layers20.6 × 23.6 mmAO-03 signal amplifier, the printed circuit board in 3D

    AO-03 signal amplifier

    fossasia/pslab-scripts

    Pocket Science Lab - Scripts for Sensor Experiments

    13 parts1.6kApache-2.0
  • 2 layers47 × 35.6 mmMX7-C-35PL C11, the printed circuit board in 3D

    MX7-C-35PL C11

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    13 parts1.2k
  • 2 layers95 × 95 mmCube batteryboard, the printed circuit board in 3D

    Cube batteryboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    13 parts1.1kGPL-3.0
  • 2 layers15.2 × 20.3 mmPt100stick, the printed circuit board in 3D

    Pt100stick

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    13 parts1.1kGPL-3.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    13 parts1kGPL-3.0

Questions

How big is the EurorackPower10pin PCB?

It measures 22.9 × 52.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the EurorackPower10pin use?

13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the EurorackPower10pin KiCad files?

From the johnsquibb/EurorackPowerBreakout repository on GitHub, at the commit this page was made from: the board is eurorackPower10pin.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the EurorackPower10pin design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).