
Cube motherboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels

A smart desktop display station powered by an E-Paper display and an ESP32 microcontroller. It presents time, weather, room metrics, and calendar events at a glance, featuring a dual-tier local/cloud voice assistant for hands-free productivity and task automation.
Smart Desk Hub PCB is an open-source printed circuit board by johnnydunal, from the johnnydunal/Smart-Desk-Hub repository on GitHub. It is a 2-layer board of 103 × 78.5 mm with 7 parts on 45 nets, routed with 99 tracks and 25 vias.
It is built around the ESP32-S3-DEVKITC-1-N8. Its parts include 4 connectors, 2 capacitors and 1 IC. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
The Smart Desk Hub is an ambient smart desktop display station powered by an E-Paper display and an ESP32 microcontroller. It presents time, weather, room metrics, and calendar events at a glance, featuring a dual-tier local/cloud voice assistant for hands-free productivity and task automation.


| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10 µF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J2, J4 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | ESP32-S3-DevKitC | PCM_Espressif:ESP32-S3-DevKitC | U1 |

willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels

jazzmonger/Traeger-PID-Controller
Traeger Smoker/Grill Controller based on an

ohasanov-hbrw/tribit32-advanced
A tri-microcontroller, overengineered GameBoy Advance clone. More value was given to the controls and the exterior look, which is cool!



FIPATECH/CDFR26_PAMI
Open source firmware and PCB for a differential mobile robot (PAMI) based on ESP32-S3 - Coupe de France de Robotique

dnhutchins/ETC_Express_Reverse_Eng
The ultimate goal of this work is to develop an interface to use the control surface from a legacy ETC Express 24/48 lighting controller as a modern EOSNomad compatible programming and fader wing.

heckler/esphome-device-configs
Configuration definitions for local ESPHome files
It measures 103 × 78.5 mm and has 2 copper layers, 1.6 mm thick.
7 parts, built around the ESP32-S3-DEVKITC-1-N8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the johnnydunal/Smart-Desk-Hub repository on GitHub, at the commit this page was made from: the board is Smart-Desk-Hub-PCB/Smart-Desk-Hub-PCB.kicad_pcb and its schematic Smart-Desk-Hub-PCB/Smart-Desk-Hub-PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask johnnydunal before reusing the design.